Ikan STR-CINE-C500-RIG Manuale utente
STR-CINE-C500-RIG
Quick Start Guide
Stratus Complete Shoulder Mount Rig System for Canon C500 Mk II & C300 Mk III
What’s Included
1 x Top Plate
1 x Manfrotto 501 Base Plate
1 x Adapter Plate
1 x Shoulder Pad
2 x 16” Carbon Fiber 15mm Rods
2 x Rubber Handgrips
2 x Extendable Dog Bones
1 x 15mm Rod Adapter
1 x Top Handle
1 x EVF/Monitor Mount
2 x Sideplates
1 x Counterweight (2x 2.5lbs)
1 x Standard NATO Rail
Features
- Complete Shoulder Mount Rig System for Canon C500 Mk II & C300 Mk III
- Includes Two Handgrips
- Shoulder Pad Features Manfrotto 501 Mount
- Includes Two Carbon fiber 15mm rods
- Compatible with Monitors up to 7 inches
- Compatible with any Arri Rosette Mounted EVF
- Rotatable Monitor/EVF mount
What’s Included
1. Adapter Plate 2. Arri Rosette
EVF Holder Rotator
4. Carbon Fiber
15mm Rods
8. Manfrotto
501-Style Baseplate
10. NATO Rail
Monitor Holder
11. NATO Rail9. Monitor Holder
12. Shoulder Pad 13. Side Plates 14. Top Handle 15. Top Plate
5. Counterweight 6. Dogbones 7. Handgrips
3. Cable Guard
Setup
Step 1: Attach the Top Plate
Attach the Top Plate (15) to the C500 placing it over the camera and making sure that the main screw
holes are aligned. Secure the Top plate by fastening two ¼-20 screws to the top of the camera.
Step 2: Attach the Adapter Plate
Attach the adapter plate (1) to the bottom of the camera by aligning the screw holes, then fasten the
screws to secure the plate.
Step 3: Attach the Baseplate
Attach the Manfrotto 501-Style Baseplate (8) to the bottom of the adapter plate (1) by aligning the
baseplate (8) until the screw holes match. Fasten the large screws to the adapter plate (1)
Step 4: Attach the Side Plates
Step 5: Attach the NATO Rail
Attach the NATO rail (11) by aligning the screw holes with the Top Plate (15) and fastening the ¼-20
screws.
Step 6: Attach the Top Handle
To attach the Top Handle (14) to the rig, first make sure that the NATO Rail (11) attachment on the Top
Handle (14) is mostly loosened. Then place the Top Handle over the NATO Rail (11).
Tighten the NATO Rail (11) attachment on the
Top Handle (14) by tightening the thumb screw.
Step 7: Attach the 15mm Rods
Attach the Carbon Fiber 15mm rods (4) by sliding them in to the Manfrotto 501-Style Baseplate’s (8)
rod slots.
To secure the 15mm rods (4), tighten both of the thumb screws located on the Manfrotto 501-style
Baseplate (8).
Step 8: Attach the Shoulder Pad
Attach the Shoulder Pad (12) by sliding it into the bottom of the Manfrotto 501-style Baseplate (8).
Make sure the thumbscrew on the side of the Shoulder Pad (12) is loosened before sliding the Shoulder
Pad in.
Tighten the thumbscrew on the Shoulder Pad (12) to secure it to the Baseplate (8)
Step 9: Attach the Handgrips and Dogbones
Attach the Handgrips (7) to the Dog bones (6) by aligning the rosettes and tightening the thumbscrews.
Attach the Dogbones (6) to the Shoulder Pad (12) by aligning the rosettes and tightening the
thumbscrews.
Step 10: Assemble and Attach the Monitor Holder/EVF Holder
To assemble the Monitor/EVF Holder, slide the Arri Rosette EVF holder Rotator (2) to the NATO Rail
Monitor Holder (10) and tighten the thumb screw. Then attach the Monitor Holder (9) to the Arri Rosette
EVF holder Rotator (2) by aligning the rosette and tightening it with the thumb screw.
Attach the Monitor/EVF Holder Assembly to the 15mm rod slot on the Top Handle (14) and secure it by
tightening the thumbscrew on the Top Handle (14).
Step 10: Assemble and Attach the Monitor Holder/EVF Holder (cont.)
Once the monitor is mounted, you can rotate the pitch to your liking. The monitor rotator tension can be
altered by tightening the screw on the NATO Rail attachment.
Note: This system is compatible with any EVF that has an ARRI rosette placed on the side. To attach an
EVF, remove the Monitor Holder (9) and attach the EVF directly to the rosette on the Arri Rosette EVF
Holder Rotator (2).
For video instructions, please scan the following QR Code
or visit
bit.ly/c500techtip
Indice
Altri manuali Ikan Accessori per fotocamere
Ikan
Ikan PT4900-SDI-P2P-TK Manuale utente
Ikan
Ikan ELE-USB-DRGFLY Manuale utente
Ikan
Ikan TRD Beholder MS1 Manuale utente
Ikan
Ikan SW50-3PT-KIT Manuale utente
Ikan
Ikan PBK-A-X Manuale utente
Ikan
Ikan PBK-A-C Manuale utente
Ikan
Ikan GRH Manuale utente
Ikan
Ikan TRD Beholder MS1 Manuale utente
Ikan
Ikan PT2500 Manuale utente
Ikan
Ikan ELEMENTS X-CAGE Manuale utente
Ikan
Ikan Beholder DS2-A Manuale utente
Ikan
Ikan TRD Beholder MS1 Manuale utente
Ikan
Ikan PT4500-PEDESTAL Manuale utente
Ikan
Ikan PT4700-TRIPOD Manuale utente
Ikan
Ikan EV2AK Manuale utente
Ikan
Ikan ELE-EV3-FFSBP Manuale utente
Ikan
Ikan IFD576-KIT-CH Manuale utente
Ikan
Ikan ID 500 Manuale utente
Ikan
Ikan PT4500-TRIPOD Manuale utente
Ikan
Ikan PT4500W-TRIPOD Manuale utente
