Infineon TC1796 Istruzioni per l'installazione e il funzionamento

App

lication Note, V 1.0, Ma

2004

TC1796 (B-step)

How to connect the EBU when it

is not used?

Microcontrollers

AP32008

Never stop thinking.

Revision Histor

:2004-05

1.0

Previous Version: -

e Sub

ects

(

or chan

es since last revision

)

TC1796 (B-step)

We Listen to Your Comments

Any information within this document that you feel is wrong, unclear or missing at all?

Your feedback will help us to continuously improve the quality of this document.

Please send your proposal (including a reference to this document) to:

[email protected]om

Edition 2004-05

Published by

Infineon Technologies AG

81726 München, Germany

LEGAL DISCLAIMER

THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE

IMPLEMENTATION OF THE INFINEONTECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE

REGARDED AS ANY DESCRIPTION ORWARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR

QUALITY OF THE INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THISAPPLICATION

NOTE MUST VERIFY ANY FUNCTIONDESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON

TECHNOLOGIES HEREBY DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND

(INCLUDING WITHOUT LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS OF ANY THIRD PARTY) WITH RESPECT TO ANY AND ALL INFORMATION GIVEN

IN THIS APPLICATION NOTE.

Information

For further information on technology, delivery terms and conditionsand prices please contact your nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements components may contain dangerous substances. For information on the types

in question please contact your nearest Infineon Technologies Office.

Infineon Technologies Components may only be used in life-support devicesor systems with the express

written approval of Infineon Technologies, if a failure of such components can reasonably be expected to

cause the failure of that life-support device or system, or to affectthe safety or effectiveness of that device or

system. Life support devicesor systems are intended to be implanted in the human body, or to support

and/or maintain and sustain and/or protect humanlife. If they fail, it is reasonable to assume that the health

of the useror other persons may be endangered.

AP32008

Connection of an unused EBU

Table of Contents

Application Note 3 V 1.0, 2004-05

Table of Contents Page

1Introduction ................................................................................................... 4

2Connection of the EBU.................................................................................. 5

AP32008

Connection of an unused EBU

Introduction

Application Note 4 V 1.0, 2004-05

1 Introduction

In some applications, the External Bus Unit (EBU) of the TC1796 is not used. It

happens for example when only the internal flash is used, and no external memory

and / or device is needed in addition to the TC1796. This application note provides

some recommendations on how to connect the EBU pins when its functionality is not

needed by the system. The recommendations below assume the EBU is not

connected to any external bus. Besides, it is also assumed that the user does not

intend to change the configuration of the EBU from its reset value.

AP32008

Connection of an unused EBU

Connection of the EBU

Application Note 5 V 1.0, 2004-05

2 Connection of the EBU

When the TC1796 is not connected to any external bus, the boot options shall be

selected such that the “Normal Internal Start “ boot mode is selected and the EBU is

configured after reset in “No bus” arbitration mode (EBU_CON.ARBMODE = 00B). See

User’s Manual for details on the TC1796 boot options.

When no bus is connected to the EBU, it is recommended, as shown in Figure 1, to

connect the EBU such that:

1. All its inputs are connected to GND (in order to avoid unpredictable behavior).

2. All its outputs and input /outputs are left open.

Figure 1 Recommended connection of the EBU

HOLD#

HDLA#

BREQ#

D(31:0)

A(23:0)

RD#

RD/WR#

MR/W#

BC(0..3)#

CS(0..3)#

VDDEBU(0..8)

CSComb#

WAIT#

ADV#

BAA#

BFCLKI

BFCLKO

GND

TC1796 EBU

AP32008

Connection of an unused EBU

Connection of the EBU

Application Note 6 V 1.0, 2004-05

Signal connections are detailed in Table 1:

Table 1 Recommended connections of the EBU.

Signal Description Type Connected to

VDDEBU(0..8) EBU power supply

Input.

Power supply GND

HOLD# Hold Request Input. Input GND

WAIT# Wait Input. Input GND

BFCLKI Burst Mode Flash

Clock Input.

Input GND

BREQ# Bus Request Output. Output Open

HDLA# Hold Acknowledge

Output.

Output Open

D(31:0) EBU Data Bus Lines Input/Output Open

A(23:0) EBU Address Bus

Lines

Input/Output Open

RD# Read Control Line Output Open

RD/WR# Write Control Line Output Open

MR/W# Read/Write Control

Line

Output Open

ADV# Address Valid

Output.

Output Open

BAA# Burst Address

Advance Output.

Output Open

BDCLKO Burst Mode Flash

Clock Output.

Output Open

BC(0..3)# Byte Control Lines Output Open

CS(0..3)# Chip Select Output

Lines

Output Open

CSCOMB# Combined Chip

Select Output

Output Open

http://www.infineon.com

Published by Infineon Technologies AG

Indice

Altri manuali Infineon Microcontrollore

Infineon

Infineon XMC7000 Series Manuale utente

Infineon

Infineon PSoC 4 Manuale dell'operatore

Infineon

Infineon TRAVEO T2G Cluster 4M Lite Kit Manuale utente

Infineon

Infineon PROFET+2 12V Arduino Shield Manuale utente

Infineon

Infineon XC2236N Manuale utente

Infineon

Infineon C513AO Manuale utente

Infineon

Infineon XMC7000 Series Manuale utente

Infineon

Infineon TC2X5 Manuale utente

Infineon

Infineon BGT60ATR24C Istruzioni per l'installazione e il funzionamento

Infineon

Infineon TDA7210V Manuale utente

Infineon

Infineon XMC4000 series Manuale utente

Infineon

Infineon Traveo II Manuale utente

Infineon

Infineon TriBoard TC1784 Manuale utente

Infineon

Infineon C166 Series Istruzioni per l'installazione e il funzionamento

Infineon

Infineon XC800 Series Manuale utente

Infineon

Infineon C166S V1 SubSystem Manuale utente

Infineon

Infineon PSoC 63 Manuale utente

Infineon

Infineon Cypress CY8CKIT-042 Istruzioni operative

Infineon

Infineon XMC4000 series Manuale utente

Infineon

Infineon XC164 Series Istruzioni per l'installazione e il funzionamento

Infineon

Infineon CY4613 Manuale utente

Infineon

Infineon XMC4500 series Manuale utente

Infineon

Infineon XMC4300 Relax EtherCAT Kit-V1.1 Manuale utente

Infineon

Infineon iMOTION2go Manuale utente

Manuali Microcontrollore popolari di altre marche

AMS

AMS AS7261 Demo Kit Manuale utente

Novatek

Novatek NT6861 Manuale utente

Espressif Systems

Espressif Systems ESP8266 SDK Guida all'installazione

Nuvoton

Nuvoton ISD61S00 ChipCorder Guida

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuale utente

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuale utente

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuale utente

NEC

NEC 78GK0S/K 1+ Series Istruzioni per l'installazione e il funzionamento

Mikroe

Mikroe SEMITECH N-PLC Click Istruzioni per l'installazione e il funzionamento

Intel

Intel Agilex Manuale utente

Cypress

Cypress CY4607 HX2VL Manuale utente

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuale utente

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuale utente

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuale utente

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuale utente

Espressif Systems

Espressif Systems ESP8266EX Istruzioni operative

Abov

Abov AC33M8128L Manuale utente

Laird

Laird BL654PA Manuale utente