Infinite Peripherals DPP-450 Manuale utente

DPP-450 USER MANUAL

DPP-450

AndroidTM is a trademark of Google Inc.

CONTACT INFORMATION

Mobility Sales/Technical Center: Inﬁnite Peripherals, Inc.

1641 McGaw Avenue

Irvine, CA 92614

Toll Free: (866) 278-7860

Oce: (949) 222-0300

Fax: (949) 222-0375

Headquarters/Main Warehouse: Inﬁnite Peripherals, Inc.

2312 Touhy

Elk Grove Village, IL 60004

Toll Free: (800) 278-7860

Phone: (847) 818-1260

Fax: (847) 818-1287

Technical Support: Inﬁnite Peripherals, Inc.

1641 McGaw Avenue

Irvine, CA 92614

Oce: (949) 222-0300

Fax: (949) 222-0375

Email [email protected]

ipcprint.com

CONTENTS

Contents 1!

Legal Notice 2!

Compatability 3!

Technical Data 4!

Box Contents 5!

Getting Started 6!

About Your DPP-450 7!

Charging Your DPP-450 8!

Status and Operational Modes 9!

Loading paper 10!

Label Paper Loading 11!

Diagnostic Self-Test 12!

Diagnostic Self-Test 13!

Memory Switch Setting 14!

Hardware Setup 15!

Configuration Menu Options 16!

Diagnostic Information 18!

Protocol Mode 19!

Dimensions 21!

Belt Clip Assembly 22!

Bluetooth® Setup iOS 23!

Bluetooth® Setup Android 24!

Replacing Battery 25!

Developing Solutions 26!

Troubleshooting 27!

Resident Command Set 28!

Federal Communications Commission 32!

USER MANUAL |

LEGAL NOTICE

“Made for iPod,” “Made for iPhone,” and Made for iPad” mean that an

electronic accessory has been designed to connect specifically to iPod,

iPhone, or iPad, respectively and has been certified by the developer to meet

Apple performance standards. Apple is not responsible for the operation of

this device or its compliance with safety and regulatory standards. Please

note that the use of this accessory with iPod, iPhone or iPad may affect

wireless performance.

iPod, iPhone, iPad touch are trademarks of Apple Inc., registered in the U.S.

and other countries. Lightning is a trademark of Apple Inc.

The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc.

and any use of such marks by Infinite Peripherals is under license

USER MANUAL |

COMPATABILITY

Made for

iPhone 5

iPhone 4S

iPhone 4

iPod touch (5th generation)

iPod touch (4th generation)

iPod touch (3rd generation)

iPad (4th generation)

iPad mini

iPad (3rd generation)

iPad 2

Android Support

Android iOS 2.1 and higher

USER MANUAL |

TECHNICAL DATA

General Specifications

* Specifications subject to change without notice.

Printing Specs

Printing Method

Line thermal dot printing

Printing Speed

150mms/s (1200 dots/sec)

Print Width

104mm / 832 dots per line

Resolution

203dpi (8x8 dots/mm)

Dot pitch

Horizontal – 0.125 mm (8 dots/mm)

Vertical – 0.125 mm (8 dots/mm)

Resident fonts

Font А: 12 х24 dots (48 char. per line);

Font B: 9 х16 dots (64 char. per line);

Loadable fonts

Font C: 12 х24 dots (48 char. per line);

Font D: 9 х16 dots (64 char. per line);

Logo Registration

1 Black and White size: 832 x 248 dots

Input Buffer

128 KB (131072 bytes)

Resident Barcodes

1D -EAN13, EAN8, UPC-A, UPC-E, Codebar, Code39, Code128

2D – PDF417, QR Code

Communications

RS232 C – max. 115200 bps,

USB v 1.1, compatible with 2.0

Bluetooth® (Optional) – for iOS and Android platforms

Emulation

ESC/POS / LABEL (Continuous paper Mode, Black Mark Mode)

Thermal Paper

Thermal Paper Roll: 115 mm / Ø 45 mm, thickness 60 µm

Label Paper Roll: 115 mm / Ø 45 mm

Electrical

Power Supply

Rechargeable Li-ion battery (14.8 V / 2200 mAh)

Battery capacity: Per Charge (~30,000 lines)

AC adapter – DC 24 V, 5 A

AC 100 – 240 V, 50/60 Hz

Magnetic Stripe

Reader

Not applicable

Environment

Temperature

Operating temp. +0°C to +40°C @ 35 to 85 % RH

Storage temp. -20°C to +60°C @ 10 to 90% RH

Reliability

Printing Head: 50km (printing rate 25% max),

(MCBF): 15,000,000 lines

Mechanical

Dimensions

136 (W) X 123 (D) Х51 (H)

Weight

785 g (without paper)

990 g (with paper)

USER MANUAL |

BOX CONTENTS

Your DPP-450 comes with the following items listed below:

DPP-450 Thermal Printer

Belt Clip

Power Supply

Sample Paper Roll

RS-232 Interface cable

Software Drivers & SDK

Because of the continually evolving Driver & SDK to support new mobile devices,

Drivers & SDK are distributed online and is available for download at our website

indicated below. For the latest on using the DPP-450 Drivers & SDK, please refer to

the SDK’s documentation.

For the latest DPP-450 Drivers & SDK’s, please visit our download area:

http://ipcprint.com/developer/downloads

USER MANUAL |

GETTING STARTED

The DPP-450 allows you to print from your smartphone over Bluetooth®.

Before using your DPP-450 the battery should be properly charged. The

following Quick Start guide will help to get your DPP-450 ready for use.

Quick Start Guide

Step

What to do

Purpose

Where to find more

information

Fully charge your

DPP-450 as

recommended in this

manual

The battery pack should be

fully charged before use to

ensure long battery life

Charging Battery, Page 8

Load DPP-450 print

media (thermal

Paper)

DPP-450 requires Thermal

paper for printing

Loading paper, page 10

and 11

Install DPP-450

Software

Printing requires software to be

installed onto your mobile

device

Printing software is not

provided by Infinite

Peripherals. account

manager for

recommendations on

Third-party solutions.

Developers should refer

to the section in this

manual on “Developing

Solutions”.

Setup Bluetooth®

pairing

Set up Bluetooth® pairing to

allow DPP-450 to

communicate with the

Bluetooth®.

Bluetooth® Setup, page

22 and 23.

USER MANUAL |

ABOUT YOUR DPP-450

DPP-450 Right View

DPP-450 Back View 2

Power Button

Print Button

Paper Feed

Button

Battery Location

USB/RS232C Port

Paper Cover

Paper Cover Latch

Battery Charging

Jack

USER MANUAL |

CHARGING YOUR DPP-450

The DPP-450 uses a Lithium Ion rechargeable battery pack. Before first use,

the battery pack should be charged for at least (4) hours from full empty.

To prevent electrical damage to the DPP-450 and/or battery pack, please use

approved AC adaptors cables only.

Connect 24V charger cable to the DC charging jack as shown below. Insert cable to

DC jack to start charging.

When the device is turn on (holding turn on/off button), the LCD display will show

“CHG” text and a green led “CHARGE” is blink.

Warning:

•When charging the DPP-450, only use the approved/recommended 24 volt @

5 amp DC adaptors. Failure to do so may cause charging problems and

potential damage to the DPP-450.

•When connecting the DC charging cable, take care as to not force the plug into

the connector as doing so may cause damage to the connector.

Solid RED = charging

Solid GREEN = fully

charged (~4 hrs.)

Altri manuali per DPP-450

Indice

Altri manuali Infinite Peripherals Stampante

Infinite Peripherals

Infinite Peripherals MP43 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-60 Manuale utente

Infinite Peripherals

Infinite Peripherals Stimare DPP-255 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-450 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-350 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-350 Manuale utente

Infinite Peripherals

Infinite Peripherals Stimare DPP-255 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-55 Manuale elenco delle parti

Infinite Peripherals

Infinite Peripherals DPP-250 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-250 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-250 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-50 Manuale di istruzioni

Infinite Peripherals

Infinite Peripherals MP34 Manuale utente

Infinite Peripherals

Infinite Peripherals Stimare DPP-255 Manuale utente

Infinite Peripherals

Infinite Peripherals MP22 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-350 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-55 Manuale utente

Infinite Peripherals

Infinite Peripherals DPP-350 Manuale utente

Infinite Peripherals

Infinite Peripherals 216 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-55 Manuale

Infinite Peripherals

Infinite Peripherals DPP-250 Manuale utente

Infinite Peripherals

Infinite Peripherals MP 24 Manuale utente

Infinite Peripherals

Infinite Peripherals MP22 Manuale utente

Infinite Peripherals

Infinite Peripherals PP-60 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente