InFocus SP-CEIL-UNIV Guida

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 1 of 11

Read instruction sheet before you start installation and assembly.

Maximum Load Capacity: 25 lb (11 kg)

Installation andAssembly-All-in-one ProjectorAdapter Plate for

InFocus®Projectors Model: SP-CEIL-UNIV

IMPORTANT! Turn to the appropriate page for your ceiling installation.

This product is intended for use with UL

Listed products and must be installed

by a qualified professional installer.

Applications:

FlushMount................................................................................................................................................. page 5

ExtensionColumn........................................................................................................................................ page 6

Lightweight Suspended Ceiling Plate ....................................................................................................... page 7

Installations:

To Wood Joist Finished Ceilings,

Exposed Wood Joists, or Wood Beam Ceilings........................................................................................ page 3

To Concrete Ceilings.................................................................................................................................... page 4

• Makesurethatthesupportingsurfacewillsafelysupportthecombinedloadoftheequipmentandallattachedhard-

wareandcomponents.

WARNING

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 2 of 11

Parts List

Before you start check the parts list to insure all of the parts shown are included.

Description Qty. Part Number

Aprojectormountassembly 1 055-0420

B4 mm security allen wrench 1 560-9646

C#10-32 x 3/8" serrated socket pin screw 2 520-1151

D#10-32 x 1/4" socket pin screw 1 520-1196

E1/4"flatwasher 2 540-9440

F#14 x 2.5 phillips hex head wood screw 2 5S1-015-C03

Gconcreteanchor 2 590-0097

HM4 x 16 mm serrated socket pin screw 3 510-1087

IM4 x 12 mm serrated socket pin screw 1 510-1079

J.198 x .313 x .375 retaining spacer 3 590-2020

K.198 x .313 x .187 retaining spacer 1 590-1030

L.25" ID x .56" OD x .26" spacer 6 590-1050

MM5 x 10 mm socket pin screw 1 520-1164

N#10-32 x 3/16" slotted set screw 1 520-1187

OM6 x 12 mm serrated socket pin screw 4 510-1050

PM4 x 6 mm serrated socket pin screw 2 510-1059

Qceilingplate 1 580-1042

Radapterplate 1 055-1539

Sextensionbracket 2 055-1540

Note: Actual parts may appear slightly different than illustrated. FASTENERS

J K

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 3 of 11

WOOD

JOIST

CEILING

Drill two 5/32" (4 mm) dia. holes to a minimum depth

of 2.5" (64 mm). Attach ceiling plate (Q) with two

#14 x 2.5" (6 mm x 65 mm) wood screws (F) as

shown using 3/8" (10 mm) socket wrench. Tighten

wood screws (F) so ceiling plate (Q) is firmly

attached.

Skip to step 7.

Installation To Wood Joist Finished Ceilings, Exposed

Wood Joists, or Wood Beam Ceilings

For optional Cord Management,

install two spacers (L) between ceiling

plate(Q)andceiling.

WOOD

JOIST

CEILING

• Tighten wood screws so that ceiling plate is firmly

attached,but do notovertighten.Overtightening can

damagethescrews, greatly reducing theirholding

power.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the joist. The use of an "edge to edge" stud

finderis highly recommended.

WARNING

Disengageconnectionblock from projector mountassembly(A) by unscrewing captivescrewand sliding out

connection block as shown.

CONNECTIONBLOCK

CAPTIVESCREW

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 4 of 11

Drill two 1/4" (6 mm) dia. holes to a minimum depth of

2.5" (64 mm). Attach ceiling plate (Q) using two

concrete anchors (G) and #14 x 2.5" wood screws (F)

as shown in Illustration A and 1, 2, and 3. Tighten all

fasteners.

Skip to step 7.

Illustration A

Installation to Concrete Ceilings

Alligator® concrete anchors are recommended.

Drill hole and insert anchor.

concrete

ceiling

CUTAWAYVIEW

CONCRETECEILING

• Concrete anchors are notintendedforattachmentto

concretewallcovered with a layer ofplaster,drywall,

orotherfinishing material. If mounting to concretewall

coveredwith plaster/drywall isunavoidable, plaster/

drywall (up to 5/8" thick) must be counterbored as

shown below. If plaster/drywall is thicker than 5/8",

custom fasteners must be supplied by installer.

WARNING

• Make sure that the supporting surface will safely

supportthecombinedload of the equipment andall

attachedhardware andcomponents.

• Tightenconcreteanchorbolt firmly,but donotover-

tighten.Overtighteningcan damage thebolt,greatly

reducingits holdingpower.

• Never tighten in excess of 80 in • lb (9 N.M.).

WARNING

Place ceiling plate over anchor and secure with screw.

After repeating step one tighten all fasteners.

INCORRECT

concrete

metal

bracket

plaster/

drywall

CORRECT

concrete

metal

bracket

plaster/

drywall

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 5 of 11

Flush Mount Installation

Drill two 5/32" (4 mm) dia. holes to a minimum depth of 2.5" (64 mm). Attach projector mount assembly (A) with two

#14 x 2.5" (6 mm x 65 mm) wood screws (F) and two flat washers (E) as shown in figure 1 or figure 2 depending

on joist orientation. Tighten wood screws (F) using 3/8" (10 mm) socket wrench until projector mount assembly (A)

is firmly attached.

Skip to step 7.

WOODJOIST

FRONTOF

MOUNT

FRONTOF

MOUNT

WOODJOIST

figure 1 figure 2

• Tightenwoodscrewsso that projector mount assem-

blyisfirmlyattached, but do not overtighten.Overtight-

eningcandamagethe screws, greatly reducing their

holdingpower.

• Never tighten in excess of 80 in • lb (9 N.M.).

• Make sure that mounting screws are anchored into the

center of the joist. The use of an "edge to edge" stud

finderis highly recommended.

WARNING

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 6 of 11

Screwextensioncolumn(soldseparately)to

ceiling plate (Q). Align the notch with one of the

four holes in the ceiling plate (Q) and secure

extension column with a M5 x 10 mm socket pin

screw (M) using security allen wrench (B). See

detail 3.

Screwprojectormountassembly (A) onto the

extension column as shown in detail 4.

Note: For3/4"extensioncolumns,reducer

ACC 913 will be required as shown in detail 5.

Tightenswivelstopscrewagainstextension

columnor reducer usingsecurityallen wrench(B).

Note: Swivel stop screw is used to jam against

threadsofextensioncolumnorreducertoprevent

anyexcessmovement ofprojectormount

assembly(A).Donotovertightenscrew;

overtighteningscrewwilldamagethreadsmaking

it difficult to separate products.

Note: Slotted set screws (N) are used to jam

against the threads of each connecting joint to

preventanyexcessmovement.Donotovertighten

screws;overtighteningscrewswilldamage

threads making it difficult to separate the

products.

Skip to step 7.

Installation to Extension Column (SP-EXTARM-01, SP-

EXTARM-02, SP-EXTARM-03, SP-EXTARM-04)

SWIVELSTOPSCREW

BACKOF

MOUNT

3/4"EXTENSIONCOLUMN

ACC 913

(NOTULLISTED)

DETAIL 3

EXTENSION

COLUMN

SWIVELSTOPSCREW BACK OF

MOUNT

DETAIL 4

DETAIL 5

EXTENSIONCOLUMN

(SOLDSEPARATELY)

(ULLISTED)

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 7 of 11

Installation to

Lightweight Suspended

Ceiling Plate

(EXT-LTMT-PLTB)

DETAIL 7

EXTENSION

COLUMN

(ULLISTED)

Refertoinstructionsheetforlightweight

suspendedceilingplate(sold

separately)forattachmentofceiling

plate to ceiling.

Screwextensioncolumn (sold

separately) to retaining collar in ceiling

tray. Align the notch with one of the

fourholes inretaining collarand secure

extension column with a M5 x 10 mm

socket pin screw (M) using security

allen wrench (B). See detail 6.

Screwprojectormount assembly(A)

onto the extension column as shown in

detail 7.

Note: For 3/4" extension columns,

reducerACC913willberequiredas

shown in detail 8.

Tightenswivelstopscrewagainst

extensioncolumnorreducerusing

securityallenwrench(B).

Note: Swivel stop screw is used to jam

againstthreadsof extension columnor

reducertopreventanyexcess

movementofprojectormountassembly

(A).Donotovertightenscrew;

overtighteningscrewwilldamage

threads making it difficult to separate

products.

Note: Slotted set screws (N) are used

to jam against the threads of each

connecting joint to prevent any excess

movement.Donotovertightenscrews;

overtighteningscrewswilldamage

threads making it difficult to separate

theproducts.

Skip to step 7.

DETAIL 6

RETAININGCOLLAR

LIGHTWEIGHT

SUSPENDEDCEILING

PLATE (SOLD

SEPARATELY)

SWIVELSTOPSCREW

BACKOF

MOUNT

3/4"EXTENSION

COLUMN

ACC 913

(NOTUL

LISTED)

DETAIL 8

PLTB

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 8 of 11

Note:The projector adapter plateandprojector you are installingmaydifferin appearance from thesampleillustrated

below.

Align shoulder on connection block opposite of front of projector. Attach adapter plate (R) to connection block from

projector mount assembly (A) using two #10-32 x 3/8" serrated socket pin screws (C) as shown.

CONNECTION BLOCK

ADAPTER PLATE

SHOULDER

RAttach extension brackets (S) to adapter plate (R)

using two M4 x 6 mm serrated socket pin screws (P).

For specific models, see step 8H.

FRONTOF

PROJECTOR

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 9 of 11

Flip projector upside down. Find your projector from the models listed below. Using the holes indicated on the corre-

sponding hole pattern diagram, attach adapter plate (R) to projector using three M4 x 16 mm serrated socket pin

screws (H) and three .198 x .313 x .375 retaining spacers (J).

Notes:

Retainingspacersgo betweenadapterplate and projector.

* Frontof projector.

** Projectors using hole pattern Guse one M4 x 12 mm screw (I) and one .198 x .313 x .187 retaining spacer (K)

whereindicated.

*** Using holes indicated in hole pattern H, attach adapter plate (R) to projector using four M6 x 12 mm serrated

socket pin screws (O) and four spacers (L)

B. C40,C50, DP2000S,DP2000X,

LP240,LP250

D. C100,C105, DP6150,DP6155,

LP690 E. C109,C110, DP8000,LP790,

SP4800,SP4805, X1,X1a, X2,X3 F. C170, LP600

C. LP340,LP350,LP500, LP530,

SP110

G. C160,C180, LP540, LP640,

SP5000 H. C440,C450,C460,DP8400X,

DP8500X,LP840, LP850,LP860

***

****

RRR

*** ***

***

A. C200,DP6500X, LP650,SP5700,

SP7200,SP7205,SP7210

I. C410,C420, LP815, LP820,

DP8200X

ISSUED: 10-22-04 SHEET #: 055-9236-5 01-10-06

Visit the InFocus Web Site at www.infocus.com 10 of 11

Slideconnectionblock with projector into projector mount

assembly (A) as shown. Tighten captive screw to secure

projectortoprojectormount assembly (A).

IMPORTANT: For security installations, insert

one #10-32 x 1/4" socket pin screw (D) through

projectormountassembly(A)and intoconnection

block as shown.

ACONNECTIONBLOCK

CONNECTIONBLOCK

CAPTIVESCREW

FRONTOFMOUNT

• Always use an assistant or mechanical lifting equipment to safely lift and position the projector.

WARNING

J. IN72,IN74,IN76 K. IN24,IN26

Indice

Altri manuali InFocus Accessori per proiettori

InFocus

InFocus LiteShow 4 DB+ Manuale utente

InFocus

InFocus SP-LAMP-090 Guida

InFocus

InFocus SP-CEIL-010 Manuale utente

InFocus

InFocus CableWizard SP-CW3 Guida rapida

InFocus

InFocus LiteProLS Manuale utente

InFocus

InFocus IN2112 Guida

InFocus

InFocus SP-CEIL-012 Manuale utente

InFocus

InFocus LP 240 Istruzioni operative e di sicurezza

InFocus

InFocus SP-CEIL-006 Manuale utente

InFocus

InFocus SP-LAMP-088 Guida

InFocus

InFocus WT96 Manuale utente

InFocus

InFocus SP-CEIL-001 Manuale utente

InFocus

InFocus RPM A-C Manuale utente

InFocus

InFocus LP770 Manuale utente

InFocus

InFocus SP777 Manuale utente

InFocus

InFocus CEILING MOUNT LP 1000 SERIES Manuale utente

InFocus

InFocus LiteShow network adapter Manuale utente

InFocus

InFocus SP-LAMP-073 Guida

InFocus

InFocus LP790 Manuale utente

InFocus

InFocus IN42 Guida

InFocus

InFocus SP-LAMP-080 Guida

InFocus

InFocus LP 650 Guida

InFocus

InFocus SP-LAMP-086 Guida

InFocus

InFocus SP-LAMP-092 Guida

Manuali Accessori per proiettori popolari di altre marche

Optoma

Optoma BX-AL133B Manuale utente

PEERLESS

PEERLESS PE 1120 Guida

Osram

Osram SIRIUS HRI Series Manuale

Presentation Switchers

Presentation Switchers PS111 Manuale utente

Kramer

Kramer VIA GO Manuale utente

Yamaha

Yamaha PJL-112 Manuale elenco delle parti

Swedstyle

Swedstyle CL23AA02ZA25E Manuale utente

Mitsubishi Electric

Mitsubishi Electric 236CB Manuale del proprietario

Epson

Epson BrightLink 475Wi Manuale utente

Acer

Acer WP100 Manuale utente

i3 i3board Manuale utente

CHIEF

CHIEF HB-43E Manuale utente

Biamp

Biamp Modena Hub Manuale di servizio

NEC

NEC MP10RX Manuale utente

Panamorph

Panamorph DCR-S3 Manuale utente

Exact solutions

Exact solutions FRAME-EVO-P10 Manuale utente

CHIEF

CHIEF VCM103S Manuale utente

Sharp

Sharp AN-PH20EZ Manuale utente