InFocus CEILING MOUNT LP 1000 SERIES Guida rapida

LP1000 RS-232 Command Values

Communication Configuration

To control this projector from an RS-232 control system, connect the serial cable or a null modem cable and the InFocus

RS-232 Adapter (SP-CWRS232) and set the control system serial port settings to match the following communication

configuration*:

RS-232 Port Settings

Setting Value

Bits per second 19,200

Data bits 8

Parity None

Stop bits 1

Flow control None

Emulation VT100

LP1000, RS-232 Connection

The RS-232 connector on the LP1000 is amale DB9 connector. Use a null modem serial cable (9pin female -9pin

female) to connect between the RS-232 port and the serial port of the computer source. The connector scheme (from left

to right) is:

otop (pins 9,8,7,6): not used, not used, not used, not used

obottom (pins 5,4,3,2,1): ground, not used, send data, receive data, not used

Three pins need to be terminated: ground, send and receive (5, 3 and 2 respectively).

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read

request (indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

A read request example:

(AAA?) where

( starts the command

AAA denotes the command

? denotes the read request

) ends the command

A read command returns the range and the current setting, for example:

Read Command Examples

Function Command Response

Brightness (BRT?) (0-22, 10)

Volume (VOL?) (0-80, 0)

Lamp Hours (LMP?) (0-9999, 421)

A write request example:

(AAA####) where

( starts the command

AAA denotes the command

#### denotes the value to be written

(leading zeros not necessary)

) ends the command

Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is

automatically set to the maximum number for that function. If a command is received that is not understood, a "?" is

returned. With absolute settings, "0" is off, 1-9999 is on. The one exception is the Power command, where 0 is off and 1 is

on.

To assure the projector can process a command, wait 3 seconds before entering the next command.

Write Command Examples

Function Command Response

Brightness (BRT10) Sets the brightness

to 10

Freeze (FRZ1) or

(FRZ8888) Freezes the display

Power (PWR0) Turns power off

Power (PWR1) Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If

a command is received that is not understood, a ‘?’ character will be returned indicating the command was not

understood.

Limitations

The CLI cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to

ensure that the command gets properly executed. To assure the projector can process a command, wait 3 seconds

before entering the next command.

Commands

The following table lists the RS-232 command value ranges for controlling the LP1000.

Note: Specified commands and values apply to the LP1000 with version 1.33 software or higher. The version number of

the software is the first number listed in the upper right corner of the on-screen menu. Command values for LP1000s with

earlier software versions may vary. If your LP1000 does not have version 1.33 software or higher, go to the

Software/Downloads page to download and upgrade the projector software.

0 = Off, 1-9999 = On for absolute command value ranges of 0 -1, unless otherwise noted.

Range

Data Source

(Computer 1, 2, 3) Video Source

(Video 1, 2)

Function Command

Min-Max, Initial Value Min-Max, Initial Value

Power (write

only) (PWR)

(use all caps) 0-1,0

0 = Off

1 = On 0-1,0

0 = Off

1 = On

Brightness (BRT) 0-128,64 0-255,128 or 111

Tint (TNT) 0-128,64 0-128,58

Contrast (CON) 0-128,70 0-127,71 or 64

ColorTemp (TMP) 0-128,64 0-128,64

Saturation (CLR) N/A 0-63,32

Optimize (OPT) 0-1,0 N/A

Video Type (VSU) N/A 0-6,0

Volume (VOL) 0-63,32 0-63,32

Balance (BAL) 0-63,32 0-63,32

Treble (TRB) 0-14,7 0-14,7

Bass (BAS) 0-14,7 0-14,7

Fade (FAD) 0-63,32 0-63,32

Ambiance (AMB) 0-37,19 0-37,19

Mute (MTE) 0-1,0 0-1,0

Manual

Tracking (MTS) 0-63,32* N/A

Manual Sync (MSS) 0-19,10* N/A

Horiz Position (HPS) 0-63,32* N/A

Vertical

Position (VPS) 0-63,32* N/A

Auto Image (AIM) 0-1,1 N/A

Resize (ARZ) 0-1,1 0-1,1

Freeze (FRZ) 0-1,0 0-1,0

Language (LAN) 0-3,0 0-3,0

Ceiling (CEL) 0-1,1 0-1,1

Rear Project (REA) 0-1,0 0-1,0

Reset (RST) 0-1,0 0-1,0

Auto Source (ASC) 0-1,0 0-1,0

Default Source

(DSC) 0-4,0

0 = computer 1

1 = computer 2

2 = computer 3

3 = video 1

0-4,0

0 = computer 1

1 = computer 2

2 = computer3

3 = video 1

4 = video 2 4 = video 2

Blank Screen (BSC) 0-1,0 0-1,0

Menu Position (MPS) 0-4,0 0-4,0

Standby Time (SBT) 0-3,3 0-3,3

Display

Messages (DMG) 0-1,1 0-1,1

Display Startup

Screen (DSU) 0-1,1 0-1,1

Standby Mode (STB) 0-1,0 0-1,0

Source (SRC)

0-4,0

0 = computer 1

1 = computer 2

2 = computer 3

3 = video 1

4 = video 2

0-4,0

0 = computer 1

1 = computer 2

2 = computer 3

3 = video 1

4 = video 2

Bulb Clock

(read only) (LMP) 0-9999,0 0-9999,0

*Software dynamically changes range based on the signal received.

Altri manuali per CEILING MOUNT LP 1000 SERIES

Questo manuale è adatto per i seguenti modelli

Altri manuali InFocus Proiettore

InFocus

InFocus X2 multi-use perfomance Manuale utente

InFocus

InFocus F5500 Manuale utente

InFocus

InFocus IN5500 Manuale utente

InFocus

InFocus X2 multi-use perfomance Manuale utente

InFocus

InFocus Quantum Laser Core Series Manuale utente

InFocus

InFocus in2100 Series Manuale utente

InFocus

InFocus LP 600 Manuale

InFocus

InFocus in2124 Manuale utente

InFocus

InFocus LP630 Manuale utente

InFocus

InFocus sp8604 Manuale utente

InFocus

InFocus LP130 Manuale utente

InFocus

InFocus IN2124a Manuale utente

InFocus

InFocus SP777 Manuale per l'uso e la cura

InFocus

InFocus LPTM425z Manuale utente

InFocus

InFocus SplashX Manuale utente

InFocus

InFocus LP260 Manuale di riferimento

InFocus

InFocus LP330 Manuale utente

InFocus

InFocus LP800 Manuale elenco delle parti

InFocus

InFocus IN3114 Manuale utente

InFocus

InFocus LP 725 Manuale utente

InFocus

InFocus Work Big IN15 Manuale utente

InFocus

InFocus IN112a Manuale utente

InFocus

InFocus LP810 Manuale per l'uso e la cura

InFocus

InFocus Quantum Laser Superior Series Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente