InFocus Work Big IN32 Guida

33

Replacing the projection lamp

The lamp hour timer in the Service Info menu counts the number of hours

the lamp has been in use. Twenty hours before the specified end of the

lamp’s life, the message “Replace lamp” briefly appears on the screen at

each startup. When the expected lamp life has been reached, the Lamp indi-

cator icon lights red (page 12).

NOTE: You can order new lamp housings from www.infocus.com (in select

areas), your retailer or your dealer. Use only a replacement lamp with the

same type and rating as the original lamp.

1Turn off the projector and unplug the power cable.

2Wait 60 minutes to allow the projector to cool thoroughly.

3Turn the projector upside down and remove the lamp door by placing a

flat-blade screwdriver into the space between the lamp door and the

projector and gently prying the door off.

4Loosen the captive screw on the lamp module.

WARNINGS:

• To avoid burns, allow the projector to cool for at least 60 minutes before

you replace the lamp.

• Unplug the power cord before replacing the lamp.

• Do not drop the lamp module. The glass may shatter and cause injury.

• Do not touch the glass lamp screen. Fingerprints can obscure projection

sharpness.

Service Info menu

turn off and unplug

the projector

wait 60 minutes

pry the lamp door off

loosen the screw on lamp module

34

• Be extremely careful when removing the lamp housing. In the unlikely

event that the lamp ruptures, small glass fragments may be generated.

The lamp module is designed to contain most of these fragments, but

use caution when removing it. Before replacing a ruptured lamp, clean

the lamp compartment and dispose of cleaning materials. Wash hands

after lamp replacement. This product has a lamp which contains a very

small amount of mercury. Dispose of it as required by local, state or fed-

eral ordinances and regulations. For more information see

www.eiae.org.

5Detach the lamp connector from the projector by gently pulling the con-

nector until it is disconnected from the projector.

6Carefully remove the lamp module by grasping and lifting the metal

bail wire. Dispose of the lamp in an environmentally proper manner.

7Install the new lamp module, making sure that it is properly seated. Be

careful not to touch the interior components of the projector.

8Snap the bail wire back into its flat position against the lamp module.

9Re-attach the lamp connector to the projector. Make sure the connector is

fully inserted.

10 Tighten the screw on the lamp module.

11 Replace the lamp door.

12 Plug in the power cable then press the Power button to turn the projec-

tor back on, then reset the lamp hour timer.

Resetting the lamp timer

To reset the lamp timer, navigate to the Settings>Service menu and select

Reset Lamp Hours.

disconnect lamp connector

remove module using bail wire

reset lamp time in Service menu

Altri manuali per Work Big IN32

4

Questo manuale è adatto per i seguenti modelli

3

Indice

Altri manuali InFocus Proiettore

InFocus

InFocus LP70+ Manuale utente

InFocus

InFocus IN5500 Manuale utente

InFocus

InFocus X1 Manuale utente

InFocus

InFocus IN42 Manuale utente

InFocus

InFocus IN112 Manuale utente

InFocus

InFocus Work Big IN15 Manuale utente

InFocus

InFocus LP 600 Manuale

InFocus

InFocus IN1100 Series Manuale utente

InFocus

InFocus IN5555L Manuale utente

InFocus

InFocus IN5533 Manuale utente

InFocus

InFocus sp8604 Manuale utente

InFocus

InFocus in3138hd Manuale utente

InFocus

InFocus Learn Big IN37EP Manuale utente

InFocus

InFocus in3138hd Manuale utente

InFocus

InFocus LP 420 Manuale utente

InFocus

InFocus LP 225 Istruzioni per l'installazione

InFocus

InFocus IN5312 Manuale utente

InFocus

InFocus IN112x Manuale utente

InFocus

InFocus LP340 Manuale utente

InFocus

InFocus LP720 Manuale utente

InFocus

InFocus IN5122 Manuale utente

InFocus

InFocus LP 600 Manuale utente

InFocus

InFocus LP500 Manuale

InFocus

InFocus ScreenPlay 4800 Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente

Asus

Asus ZenBeam Latte Manuale utente