Ingenico iCT220, iCT250 Manuale utente
Ingenico iCT220 & iCT250 Retail Quick Start Guide
Wind River Financial
1
Ingenico iCT220C & iCT250 Quick Start Guide
Retail app INGEMV3
Terminal Setup –2
Sale –5
Reversal vs Return - 10
Reversal –10
Return –12
Reprint –16
Settlement –18
Reports –19
Settlement report settings –21
Contact & Troubleshooting –25
2
Setting Up Your Terminal
Your terminal needs power and either a phone line or an internet connection. Both the power and the
communication cables plug into the “magic box” at the end of the terminal’s cord.
Communications Cord
If you are using a phone line, locate the phone
line port on the magic box. Make sure you plug
your phone line into the port marked with a
picture of a phone handset, and not into the
RS232 or ETH port.
If you are using an internet connection, plug
your Ethernet cable into the port marked
“ETH.”
3
Power Cord
Next, assemble the two parts of the power
cord. The small round connector on one end of
the cord plugs into the terminal’s magic box
using a port marked with a small lightning bolt
symbol.
Plug the other end of the power cord into a wall
socket. Make sure to use a socket that is not
operated by a light switch—the terminal needs
to stay on all night so it can automatically settle
the batch. The terminal will chirp and begin
starting up once it is plugged in. Always use the
cord that came with your terminal. Never try to
use this terminal with a power cord from a
different model. Using unsupported power
cables can permanently damage the terminal.
4
Paper Roll
To load paper into the terminal, open the
printer by pulling up on the plastic tab near the
top of the machine.
If there are any test receipts inside the printer,
remove them. Pull up a small amount of paper
from the roll as shown and close the printer.
5
Using the Terminal
The red key on your terminal is Cancel, the yellow key is Backspace, and the green key is Enter. When
the terminal is on the main screen (showing your business name) you can also use the green key to open
the main menu. The terminal has four more keys just below the screen with labels F1 through F4. F1 and
F4 are context sensitive keys and F2 and F3 are used to scroll up and down in menus.
Running a Sale
Always begin a sale by pressing the 1 key or
choosing 1-Sale from the main menu.
For most transactions, choose 1-Credit. If your
customer has a debit card and wants to use
their 4-digit PIN, choose 2-Debit.
6
Type in the sale amount and press Enter. The terminal will alternate between showing
the sale amount and “Swipe/Insert/Tap/Key.” It
is ready to accept a card.
7
If you have a chip card, insert it into the chip
reader. If you accidentally swipe a chip card, the
terminal will show a message reminding you to
use the chip reader. Follow the prompts to
complete the sale.
If you have a non-chip card, swipe it through
the card reader. Follow the prompts to
complete the sale.
8
If the customer is paying with a contactless NFC
card or a smart phone, direct them to hold their
card or phone close to the terminal screen for
about one second. Follow the prompts to
complete the sale.
If you are accepting a card over the phone or
the terminal is having trouble reading the card
normally, you can key in the 16 digit card
number and press Enter.
9
When you key in a card number, the terminal
will prompt you for additional information.
Depending on your choices, it will ask for some
or all of the following:
Card expiration date: 4-digit date on card
Card present: Whether the card is there
with you or you are accepting it over the
phone
CVC: 3 or 4 digit code on back of the card
Mail order/Phone Order/Ecommerce
Order #: Don’t skip this prompt, enter
something to get the best rate from Visa &
MasterCard
Address: numeric part of the cardholder’s
street address
Zip: cardholder’s 5 digit ZIP code
After you have inserted, swiped, or keyed in the
card number, the terminal will process your
transaction, return a response, and print a
receipt.
Altri manuali per iCT220, iCT250
24
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Ingenico Terminale touch
Ingenico
Ingenico Desk 3500 Manuale utente
Ingenico
Ingenico FLEX IPP320 Guida all'installazione
Ingenico
Ingenico Link 2500 Manuale utente
Ingenico
Ingenico iWL250 WIFI Manuale utente
Ingenico
Ingenico iWL250B Manuale utente
Ingenico
Ingenico iCMPsi Manuale utente
Ingenico
Ingenico AXIUM EX8000 Manuale utente
Ingenico
Ingenico iWL258 Manuale utente
Ingenico
Ingenico Telium Manuale utente
Ingenico
Ingenico UOB Manuale utente
Ingenico
Ingenico iCT220, iCT250 Guida di riferimento
Ingenico
Ingenico Move 5000 Manuale utente
Ingenico
Ingenico AXIUM DOCK Manuale utente
Ingenico
Ingenico DESK/3500 Manuale utente
Ingenico
Ingenico Desk 5000 Manuale utente
Ingenico
Ingenico iWL250 WIFI Manuale utente
Ingenico
Ingenico Moby/M100 Manuale utente
Ingenico
Ingenico Desk 2600 Manuale utente
Ingenico
Ingenico iwl255 Manuale utente
Ingenico
Ingenico DESK/3500 Manuale utente
