Innovative 9136 Manuale utente

Model 9136 Single or Double

LCD Pole Arm

Ergonomic mounting solutions for monitors and keyboards.

Installation Instructions

The following patents apply: 6,505, 988

Use the cable clip to keep cables organized

and in tact around the pole.

*Double models will have 2 cable clips.

Q. Can I download these instructions?

A. All product instructions are available on our website; www.LCDarms.com

Q. How do I return my monitor arm if I need to?

A. To discuss a return, contact our customer service department at 800.888.6024

All returned items

must be accompanied by an RMA.

IOP-502581

Step 6 Cable Management

Trouble-shooting & F. A. Q.

Ergo In Demand, Inc. Contact Information:

4900 Industry Drive

Central Point, OR 97502 800.888.6024 (Toll Free)

541.779.3763 (Office)

541.779.0829 (Fax)

[email protected] (Email)

Step 1 Pole Assembly

Be sure the mount is securely fastened to the surface before beginning. Align the tilter and VESA bracket with the

hole pattern on the back of the ﬂat panel

monitor.

Use the four (4) M4-12 Philips Pan Head

screws to attach the plate to the back of

the LCD monitor.

After securing the plate to the ﬂat panel insert the tilter

into the arm.

Use the 10-32” Philips Pan Head screw and washer and

fasten them to the hole in the underside of the tilter shaft,

locking the monitor in place.

Tilt the monitor so it faces upward and

locate the set screw under the tilter. Insert

the 7/32” Allen wrench into set screw to

adjust the tilt friction.

* To tighten friction turn the wrench to the

right.

* To loosen, turn the wrench to the left.

Step 1A Pole Height Adjustment

To adjust the position of the ﬁgure 8 adapter, loosen the

thumbscrew and collar under the adapter. The adapter

and collar will easily slide up and down the mounting

pole. Once the desired position has been reached,

tighten the thumbscrew and the set screw.

*If you are assembling the Double, do this for both upper

and lower collars.

Step 2 Attach Tilter/VESA bracket to the monitor

Step 3 Bracket Assembly Continued

Step 4 Monitor to Arm Assembly

Step 5 Tilt Mechanism Adjustments

Single: Insert the pole into the stand and tighten

set screw in back of stand using the 3/32” allen

wrench.

Double: Follow above step, insert the second pole

inside the ﬁrst pole at preferred height and tighten

the set screws with the 3/32” allen wrench that is

provided.

3/32”

allen wrench

Thumbscrew

& Collar

3/32”

allen wrench

Screw &

Washer

Carefully remove the base from the

ﬂat panel monitor. (See your moni-

tor’s User’s Guide for instructions on

how to do this.)

Attach the adapter plate (75MM

or 100MM) to the tilter mechanism,

using four (4) #10-32 x 3/8” Flat

Head Philips screws.

Ergo In Demand, Inc. Contact Information:

4900 Industry Drive

Central Point, OR 97502 800.888.6024 (Toll Free) 541.779.0829 (Fax)

541.779.3763 (Office) [email protected] (Email)

Indice

Altri manuali Innovative Rack e supporto

Innovative

Innovative 7020 Manuale utente

Innovative

Innovative PTS-04-LANE Manuale utente

Innovative

Innovative 9047 Manuale utente

Innovative

Innovative Winston Lift Single Manuale utente

Innovative

Innovative WINSTON-E Series Manuale utente

Innovative

Innovative PTS-04-ISC250 Manuale utente

Innovative

Innovative LCD Monitor Arm 9103 Manuale utente

Innovative

Innovative 7000 Manuale utente

Innovative

Innovative 8408 Manuale utente

Innovative

Innovative PTS-04-M400/MX915 Manuale utente

Innovative

Innovative Ella Manuale utente

Innovative

Innovative 9035 CRT Guida all'installazione

Innovative

Innovative 8519 Manuale utente

Innovative

Innovative EVO 5900 Manuale utente

Innovative

Innovative MAX Manuale utente

Innovative

Innovative Winston Lift Single Manuale utente

Innovative

Innovative 9138 Manuale utente

Innovative

Innovative UltraRack URPS Manuale utente

Innovative

Innovative 9400 Manuale utente

Innovative

Innovative STAXX Series Manuale utente

Innovative

Innovative Ella Manuale utente

Innovative

Innovative 5501 Manuale utente

Innovative

Innovative HAT Collective WINSTON-E Triple Manuale utente

Innovative

Innovative 9120 Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente