Interlogix TruVision 4 IP Series Foglio di istruzioni

TruVision Series 4 IP

Camera Configuration

Manual

P/N 1073194-EN • REV D • ISS 09JUL19

2019 United Technologies Corporation.

Interlogix is part of UTC

Climate, Controls & Security

, a unit of United

Technologies Corporation.

Disclaimer

Information in this document is subject to change without notice. No

part of this document may be reproduced or transmitted in any form

or by any means, electronic or

mechanical, for any purpose, without

the express written permission of UTC Fire & Security Americas

Corporation, Inc.

Trademarks and

patents

rade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of t

respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC

Building & Industrial Systems B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

Contact information

and manuals/ tools/

firmware

For contact information and to download the latest manuals, tools, and

firmware, go to the web site of your region.

Americas: www.interlogix.com

EMEA: www.firesecurityproducts.com

Manuals are available in

several languages.

Australia/New Zealand: www.utcfs.com.au

TruVision Series 4 IP Camera Configuration Manual 1

Content

Introduction 3

Default settings to access the camera 4

Network access 5

Checking your web browser security level 5

Accessing the camera over the network 6

Overview of the camera web browser 6

Camera configuration 9

Configuration menu overview 9

Local configuration 10

System time 12

IR LED settings for the TVC-OH3-HT housing 13

Network settings 13

Recording parameters 22

Video image 25

OSD (On Screen Display) 29

Text overlay 30

Privacy masks 31

Picture overlay 32

Motion detection alarms 32

Tamper-proof alarms 38

Exception alarms 39

Alarm inputs and outputs 40

Face detection 41

Audio exception detection 43

Cross line detection 45

Intrusion detection 46

Defocus detection 48

Scene change detection 49

Region entrance detection 51

Region exiting detection 53

Unattended baggage detection 55

Object removal detection 57

Snapshot parameters 59

NAS settings 61

Storage devices 62

Recording schedule 63

RS-485 settings 65

Object counting 65

Camera management 67

User management 67

RTSP authentication 69

2 TruVision Series 4 IP Camera Configuration Manual

IP address filter 70

Defining the security service 71

Restore default settings 71

Import/export a configuration file 72

Upgrade firmware 72

Reboot camera 74

Camera operation 75

Logging on and off 75

Live view mode 75

Playing back recorded video 76

Searching event logs 78

Operating PTZ control 80

TruVision Series 4 IP Camera Configuration Manual 3

Introduction

This is the configuration manual for the following TruVision IP camera models:

TVC-5401 (2MPX low light camera)

TVC-5402 (3MPX box camera)

TVC-5403 (5MPX box camera)

TVB-5401 (2MPX low light bullet camera)

TVB-5402 (2MPX low light bullet camera)

TVB-5403 (3MPX motorized lens bullet camera)

TVB-5404 (3MPX motorized lens bullet camera)

TVB-5405 (5MPX motorized lens bullet camera)

TVD-5401 (2MPX low light indoor mini dome)

TVD-5402 (3MPX motorized lens mini indoor dome)

TVD-5403 (5MPX indoor mini dome)

TVD-5404 (2MPX low light motorized lens dome)

TVD-5405 (2MPX low light motorized lens dome)

TVD-5406 (3MPX WDR motorized lens dome)

TVD-5407 (3MPX WDR motorized lens dome)

TVD-5408 (5MPX motorized lens mini dome)

4 TruVision Series 4 IP Camera Configuration Manual

Default settings to access the camera

Default credentials

The camera comes with a user account with administrative rights for configuring all

options on the camera. The user name is “admin” and the password is “1234”. It is

highly recommended that the default password be changed during initial setup for

enhanced security.

Default network settings

The network settings are:

IP address: 192.168.1.70

Subnet mask: 255.255.255.0

Gateway address: 192.168.1.1

Ports used:

Browser

TruVision Navigator

RTSP: 554

HTTP: 80

Server/client control port: 8000

Please see “Overview of the camera web browser” on page 6 for further information.

TruVision Series 4 IP Camera Configuration Manual 5

Network access

This manual explains how to configure the camera over the network with a web

browser.

TruVision IP cameras can be configured and controlled using Microsoft Internet

Explorer (IE) and other browsers. The procedures described use Microsoft Internet

Explorer (IE) web browser.

Checking your web browser security level

When using the web browser interface, you can install ActiveX controls to connect and

view video using Internet Explorer. However, you may not be able to download data,

such as video and images, due to the browser’s security settings. Consequently you

should check the security level of your browser so that you are able to interact with the

cameras over the web and, if necessary, modify the Active X settings.

Configuring IE ActiveX controls

You should confirm the ActiveX settings of your web browser.

To change the web browser’s security level:

1. In Internet Explorer click Internet Options on the Tools menu.

2. On the Security tab, click the zone to which you want to assign a web site under

“Select a web content zone to specify its security settings”.

3. Click Custom Level.

4. Change the ActiveX controls and plug-ins options that are signed or marked as

safe to Enable. Change the ActiveX controls and plug-ins options that are

unsigned to Prompt or Disable. Click OK.

- or -

Under Reset Custom Settings, click the security level for the whole zone in the

Reset To box, and select Medium. Click Reset.

Then click OK to the Internet Options Security tab window.

5. Click Apply in the Internet Options Security tab window.

Windows users

Internet Explorer for Windows 7, Windows 8, and Windows 10 operating systems have

increased security measures to protect your PC from any malicious software being

installed.

To have complete functionality of the web browser interface with Windows 7, Windows

8, and Windows 10 do the following:

• Run the Browser interface as an administrator on your workstation

• Add the camera’s IP address to your browser’s list of trusted sites

6 TruVision Series 4 IP Camera Configuration Manual

To add the camera’s IP address to Internet Explorer’s list of trusted sites:

1. Open Internet Explorer.

2. Click Tools, and then Internet Options.

3. Click the Security tab and then select the Trusted sites icon.

4. Click the Sites button.

5. Clear the “Require server verification (https:) for all sites in this zone box.

6. Enter the IP address in the “Add this website to the zone” field.

7. Click Add, and then click Close.

8. Click OK in the Internet Options dialog window.

9. Connect to the camera for full browser functionality.

Accessing the camera over the network

Use the web browser to access and configure the camera over the internet.

It is recommended that you change the administrator password once the setup is

complete. Only authorized users should be able to modify camera settings. See “User

management” on page 67 for further information.

To access the camera online:

1. In the web browser enter the camera’s IP address (default is 192.168.1.70). Use the

TruVision Device Manager included on the CD to find the IP address of the camera

and assign it a new address on the local network, if desired.

The Login dialog box appears.

Note: Ensure that the Active X controls are enabled.

2. Enter your user name and password.

User name: admin

Password: 1234

3. Click Login. The web browser window appears in live view mode.

Overview of the camera web browser

The camera web browser lets you view, record, and play back recorded videos as well

as manage the camera from any PC with access to the same network as the camera.

The browser’s easy-to-use controls give you quick access to all camera functions. See

Figure 1 on page 7.

If there is more than one camera connected over the network, open a separate web

browser window for each individual camera.

TruVision Series 4 IP Camera Configuration Manual 7

Figure 1: Web browser interface

Name

Description

1. Live view Click to view live video.

2. Playback Click to play back video.

3. Log Click to search for event logs. There are three main types: Alarm,

Exception and Operation.

4. Configuration Click to display the configuration window for setting up the camera.

5. Viewer View live video. Time, date and camera name are displayed here.

6. Current user Displays current user logged on.

7. Logout Click to log out from the system. This can be done at any time.

8. PTZ controls Direction actions, zoom, focus, iris, light and wiper control.

Note: Direction actions, light, and wiper control can be used if the

camera supports RS-485 and external pan/tilt unit, light or wiper is

installed.

9. Display Control Click each tab to adjust the layout and the stream type of the live

view. You can also click the drop-down menu to select the plug-in.

For IE (internet explorer) users, web components and QuickTime®

are selectable. For non-IE users, web components, QuickTime, VLC

or MJPEG are selectable, if they are supported by the web browser.

10. Start/stop live view Click to start/stop live view.

11. Audio Adjust the volume.

12.

Manual alarm Turn on/off the alarm

13. Bidirectional audio Turn on/off the local microphone (if supported).

14. Capture Click to take a snapshot of the video. The snapshot will be saved to

the default folder in JPEG or BMP format.

8 TruVision Series 4 IP Camera Configuration Manual

Name

Description

15. Start/stop

recording Click to record live video.

16. Digital zoom Click to enable digital zoom.

Indice

Altri manuali Interlogix Telecamera di sicurezza

Interlogix

Interlogix TVB-5501 Manuale utente

Interlogix

Interlogix TVP-6102 Manuale utente

Interlogix

Interlogix UltraView PTZ Manuale utente

Interlogix

Interlogix TVD-5125TE-3 Manuale utente

Interlogix

Interlogix UVD-XP4DNR(-P) Manuale utente

Interlogix

Interlogix TruVision TVC-7120-1-N Manuale utente

Interlogix

Interlogix TruVision TVB-2402 Foglio di istruzioni

Interlogix

Interlogix TVB-5801 Foglio di istruzioni

Interlogix

Interlogix TruVision TVT-2101 Manuale utente

Interlogix

Interlogix TruVision TVP-5201 Foglio di istruzioni

Interlogix

Interlogix TruVision TVD-2401 Manuale utente

Interlogix

Interlogix TruVision TVB-4410 Manuale

Interlogix

Interlogix UltraView UVD-6130VE-2 Series Manuale utente

Interlogix

Interlogix UltraView IP PTZ 36X Manuale utente

Interlogix

Interlogix TruVision TVB-2402 Manuale utente

Interlogix

Interlogix UVD-XP3DNR Istruzioni per il montaggio

Interlogix

Interlogix TruVision TVD-2404 Manuale utente

Interlogix

Interlogix TVW-6101 Manuale utente

Interlogix

Interlogix TruVision Line Manuale

Interlogix

Interlogix TruVision 5 Series Foglio di istruzioni

Interlogix

Interlogix TruVision TVB-5702 Foglio di istruzioni

Interlogix

Interlogix TruVision TVC-7120-1-N Manuale utente

Interlogix

Interlogix TruVision PTZ 36X Manuale utente

Interlogix

Interlogix TruVision Series Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente