Interlogix TVB-5801 Foglio di istruzioni

TruVision Stainless Steel IP

Cameras Configuration

Manual

P/N 1073371-EN • REV B • ISS 27MAR18

2018 United Technologies Corporation.

Interlogix is part of UTC

Climate, Controls & Security, a unit of U

nited

Technologies Corporation.

Trademarks and

patents

rade names used in this document may be trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer

Interlogix

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

UTC

Building & Industrial Systems B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

Product warnings and

disclaimers

THESE PRODUCTS ARE INTENDED FOR SALE TO AND

INSTALLATION BY QUALIFIED PROFEIONALS. UTC FIRE &

SECURITY CANNOT PROVIDE ANY AURANCE THAT ANY

PERSON OR ENTITY BUYING ITS PRODUCTS, INCLUDING ANY

“AUTHORIZED DEALER” OR “AUTHORIZED RESELLER”, IS

PROPERLY TRAINED

OR EXPERIENCED TO CORRECTLY

INSTALL FIR

E AND SECURITY RELATED PRODUCTS.

For more information on warranty disclaimers and product safety

information, please check

www.firesecurityproducts.com

/policy/product-warning/ or scan the

following code:

Contact

information

and manuals

For contact information go to: www.interlogix.com or

www.firesecurityproducts.com

To get translations for this and other product manuals go to:

www.firesecurityproducts.com

2 TruVision Stainless Steel IP Cameras Configuration Manual

Content

Introduction 3

Default settings to access the camera 3

Network access 4

Checking your web browser security level 4

Activating the camera 5

Overview of the camera web browser 6

Camera configuration 8

Configuration menu overview 8

Local configuration 9

System time 11

Network settings 12

Recording parameters 19

Video image 23

OSD (On Screen Display) 26

Text overlay 28

Privacy masks 28

Picture overlay 29

Motion detection alarms 30

Tamper-proof alarms 36

Exception alarms 37

Alarm inputs and outputs 38

Face detection 39

Audio exception detection 41

Cross line detection 42

Intrusion detection 44

Defocus detection 46

Scene change detection 47

Region entrance detection 49

Region exiting detection 51

Unattended baggage detection 53

Object removal detection 55

Snapshot parameters 57

NAS settings 59

Storage devices 60

Recording schedule 61

RS-485 settings 63

Object counting 63

Camera management 65

User management 65

RTSP authentication 67

IP address filter 68

Defining the security service 69

TruVision Stainless Steel IP Cameras Configuration Manual 1

Restore default settings 69

Import/export a configuration file 70

Upgrade firmware 70

Reboot camera 71

Camera operation 72

Logging on and off 72

Live view mode 72

Playing back recorded video 73

Searching event logs 75

Operating PTZ control 77

2 TruVision Stainless Steel IP Cameras Configuration Manual

Introduction

This is the configuration manual for the following TruVision models:

IP stainless steel outdoor box camera housings:

• TVB-5801 (2 MPX camera, 3.8 to 16 mm lens)

• TVB-5802(2 MPX camera, 11 to 40 mm lens)

IP stainless steel dome camera:

• TVD-5801 (2 MPX camera, 2.8 to 12 mm lens)

Default settings to access the camera

Default credentials

The camera comes with a user account with administrative rights for configuring all

options on the camera. The user name is “admin” and the password is “1234”. For

enhanced security, we highly recommend changing the default password during initial

setup.

Default network settings

The network settings are:

IP address (in a network without a DHCP server): 192.168.1.70

Subnet mask: 255.255.255.0

Gateway address: 192.168.1.1

Ports used:

Browser

TruVision Navigator

RTSP: 554

HTTP: 80

Server/client control port: 8000

TruVision Stainless Steel IP Cameras Configuration Manual 3

Network access

This manual explains how to configure the camera over the network with a web

browser.

TruVision IP cameras can be configured and controlled using Microsoft®Internet

Explorer®and other browsers. The procedures described use Microsoft Internet

Explorer (IE) web browser.

Checking your web browser security level

When using the web browser interface, ActiveX controls can be installed to connect and

view video using Internet Explorer. However, data such as video and images cannot be

downloaded due to the increased security measure. Check the security level of the PC

to enable interaction with the cameras over the web and, if necessary, modify the

Active X settings.

Configuring IE ActiveX controls

Confirm the ActiveX settings of your web browser.

To change the web browser’s security level:

1. In Internet Explorer click Internet Options on the Tools menu.

2. On the Security tab, click the zone to be assigned to a website under “Select a web

content zone to specify its security settings.”

3. Click Custom Level.

4. Change the ActiveX controls and plug-ins options that are signed or marked as

safe to Enable. Change the ActiveX controls and plug-ins options that are

unsigned to Prompt or Disable. Click OK.

—or—

Under Reset Custom Settings, click the security level for the whole zone in the

Reset To box, and then select Medium. Click Reset, and then click OK in the

Internet Options Security tab window.

5. Click Apply in the Internet Options Security tab window.

Windows users

Internet Explorer for Windows®operating systems have increased security measures to

protect a PC from malicious software.

To ensure complete functionality of the Windows web browser interface, do the

following:

• Run IE as an administrator in the workstation

• Add the camera’s IP address to the IE’s list of trusted sites

4 TruVision Stainless Steel IP Cameras Configuration Manual

To add the camera’s IP address to Internet Explorer’s list of trusted sites:

1. Open Internet Explorer.

2. Click Tools, and then Internet Options.

3. Click the Security tab and then select the Trusted sites icon.

4. Click the Sites button.

5. Deselect the Require server verification (https:) for all sites in this zone check

box.

6. Type the IP address in the Add this website to the zone box.

7. Click Add, and then click Close.

8. Click OK in the Internet Options dialog window.

9. Connect to the camera for full browser functionality.

Activating the camera

When you first start up the camera, the Activation window appears. You must define a

high-security admin password before you can access the camera. There is no default

password provided.

You can activate a password via a web browser and via TruVision Device Manager

(included on the CD to find the IP address of the camera).

Activation via the web browser:

1. Power on the camera and connect the camera to the network.

2. Type the IP address into the address bar of the web browser, and press Enter to

enter the activation interface.

Note:

The default IP address of the camera is 192.168.1.70.

For the camera to enable DHCP by default, you must activate the camera via

TruVision Device Manager. Please refer to the following section, “Activation via

TruVision Device Manager”.

TruVision Stainless Steel IP Cameras Configuration Manual 5

3. Type the password in the Password field.

Note: A valid password range must be between 8 and 16 characters. You can use a

combination of numbers, lower and upper case letters, and special characters : _ - ,

. * & @ / $ ? Space. The password must contain characters from at least two of

these groups. We also recommend that you reset your password regularly. For high

security systems, it is particularly recommended to reset the password monthly or

weekly for better protection.

4. Confirm the password.

5. Click OK to save the password and enter the live view interface.

Activation via TruVision Device Manager:

For instructions on how to activate the camera using TruVision Device Manager, refer

to the TruVision Device Manager User Manual.

Go to www.interlogix.com/video/product/truvision-device-manager and click

Downloads.

Overview of the camera web browser

Use the camera web browser to view, record, and play back recorded videos as well as

manage the camera from any PC with access to the same network as the camera. The

browser’s easy-to-use controls provide quick access to all camera functions.

If there is more than one camera connected over the network, open a separate web

browser window for each individual camera.

Figure 1: Web browser interface

6 TruVision Stainless Steel IP Cameras Configuration Manual

Name

Description

1. Live view Click to view live video.

2. Playback Click to play back video.

3. Log Click to search for event logs. There are three main types: Alarm,

Exception and Operation.

4. Configuration Click to display the configuration window for setting up the camera.

5. Viewer View live video. Time, date and camera name are displayed here.

6. Current user Displays current user logged on.

7. Logout Click to log out from the system. This can be done at any time.

8. PTZ controls Direction actions, zoom, focus, iris, light and wiper control.

Note: Direction actions, light, and wiper control can be used if the

camera supports RS-485 and external pan/tilt unit, light or wiper is

installed.

9. Display Control Click each tab to adjust the layout and the stream type of the live

view. You can also click the drop-down menu to select the plug-in.

For IE (internet explorer) users, web components and QuickTime®

are selectable. For non-IE users, web components, QuickTime, VLC

or MJPEG are selectable, if they are supported by the web browser.

10. Start/stop live view Click to start/stop live view.

11. Audio Adjust the volume.

12.

Manual alarm Turn on/off the alarm

13. Bidirectional audio Turn on/off the local microphone (if supported).

14. Capture Click to take a snapshot of the video. The snapshot will be saved to

the default folder in JPEG or BMP format.

15. Start/stop

recording Click to record live video.

16. Digital zoom Click to enable digital zoom.

TruVision Stainless Steel IP Cameras Configuration Manual 7

Camera configuration

This chapter explains how to configure the cameras through a web browser.

After the camera hardware has been installed, configure the camera’s settings through

the web browser. Administrator rights are required to configure the cameras over the

internet.

The camera web browser permits configuration of the camera remotely using a PC.

Web browser options may vary depending on camera model.

There are two main menus in the configuration panel:

Local configuration

Configuration

Configuration menu overview

Use the Configuration panel to configure the network, camera settings, alarms, users,

transactions and other parameters such as upgrading the firmware. See Figure 2 below

for descriptions of the configuration menus available.

Figure 2: Configuration window (Device Information tab selected)

Configuration menus Description

System

Defines basic device information including SN, the current firmware

version, time settings, maintenance, and serial port parameters. See

“System time” on page 11 for further information.

Network

Defines the parameters required to access the camera over a network

See “Network settings” on page 12 for further information on the setup.

Video/Audio

Defines recording parameters.

8 TruVision Stainless Steel IP Cameras Configuration Manual

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Interlogix Telecamera di sicurezza

Interlogix

Interlogix TruVision TVB-4402 Manuale utente

Interlogix

Interlogix TruVision TVW-2401 Manuale utente

Interlogix

Interlogix UVP-M1120P-18X-N Manuale utente

Interlogix

Interlogix UltraSync RS-3240 Manuale utente

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TruVision 4 Series Manuale utente

Interlogix

Interlogix TruVision TVD-5801 Manuale utente

Interlogix

Interlogix TruVision Line Manuale

Interlogix

Interlogix TruVision TVD-6120VE-2 Manuale utente

Interlogix

Interlogix TVC-5120-1 Manuale utente

Interlogix

Interlogix 36X Manuale utente

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TruVision TVB-2402 Manuale utente

Interlogix

Interlogix 4 SERIES Foglio di istruzioni

Interlogix

Interlogix TVD-5110-3 Manuale utente

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TruVision IP Dome Manuale utente

Interlogix

Interlogix TruVision 4 IP Series Foglio di istruzioni

Interlogix

Interlogix UVD-XP4DNR(-P) Manuale utente

Interlogix

Interlogix TruVision TVA-1101 Manuale utente

Interlogix

Interlogix UVC-XP4DN-HR Manuale utente

Interlogix

Interlogix UVC-XP4DN-HR Manuale utente

Interlogix

Interlogix TruVision TVB-5702 Foglio di istruzioni

Interlogix

Interlogix TVF-1101 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente