Interlogix TruVision IP Dome Manuale utente

TruVision IP Dome Open-

Standards User Manual

P/N 1076511B-EN • REV 1.0 • ISS 20MAR12

Trademarks and

patents

Interlogix,

TruVision namesand logos are trademarks of

UTC

Fire & Security.

Other trade names used in this document may be

trademarks or

registered trademarks of the manufacturers or vendors of the

respective products.

Manufacturer

UTC Fire & Security Americas Corporation, Inc.

2955 Red Hill Avenue, Costa Mesa, CA 92626

-5923, USA

Authorized EU manufacturing representative:

TC Fire & Security B.V.

Kelvinstraat 7, 6003 DH Weert, The Netherlands

Certification

N4131

FCC compliance

Class A:

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated i

n a

commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in

a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own

expense.

ACMA compliance

Notice!

This is a Class A product. In a domestic environment this

product may cause rad

io interference in which case the user may be

required to take adequate measures.

Canada

This Class A digital apparatus complies with Canadian ICES

-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB

-0330 du Canada.

European Union

directives

2004/108/EC (EMC directive): Hereby, UTC Fire & Security

declares that this device is in compliance with the essential

requirements and other relevant provisions of Directive

2004/108/EC

2002/96/EC (WEEE directive):

Products marked with this symbol

cannot be disposed of as unsorted municipal waste in the European

Union. For proper recycling, return this product to your local supplier

upon the purchase of equivalent new equipment, or dispose of it at

designated collection points. For more i

nformation see:

www.recyclethis.info.

Contact information

For contact information

,see www.interlogix.com or

www.utcfssecurityproducts.eu

Customer suppor

w.interlogix.com/customer-support

TruVision IP Dome Open-Standards User Manual i

Content

Chapter 1 Introduction 1

Product overview 1

Features 1

Chapter 2 Installation 3

Installation environment 3

Package contents 4

Cable requirements 4

Camera dimensions 5

Setting up the camera 5

Connecting the devices 6

Accessing the SDHC card 8

Mounting the dome cameras on a ceiling 9

Mounting the wedge dome cameras on a ceiling 11

Using the camera with TVR 60/ TVN 20/ TVN 40/ LNVR and other

systems 13

Using the camera with TruVision Navigator 13

Chapter 3 Network and streaming configuration 15

Checking your Web browser security level 15

Accessing the camera over the internet 17

Overview of the camera Web browser 18

Configuring the camera’s network settings 20

Information about the camera 23

Network parameters 23

Serial port settings 25

Chapter 4 Camera configuration 27

Camera parameters 27

Defining how information is displayed on screen 28

Defining the system time 29

Alarm parameters 30

Events scheduling 31

Defining recording parameters 32

Motion detection alarms 35

Adding extra on-screen text 38

Configuring the video image 38

Chapter 5 Camera management 41

User management 41

Formatting the SDHC card 43

Restoring default settings 44

Upgrading the firmware 44

Rebooting the camera 45

ii TruVision IP Dome Open-Standards User Manual

Chapter 6 Camera operation 47

Logging on and off 47

Live mode 47

Playing back recorded video 48

Searching event logs 50

Archiving recorded files 52

Using presets 53

Appendix A Specifications 55

TruVision IP Dome Open-Standards cameras 55

IP wedge dome cameras 56

Appendix B Pin definitions 57

Index 59

TruVision IP Dome Open-Standards User Manual 1

Chapter 1

Introduction

Product overview

This is the user manual for TruVision IP dome open-standard camera models:

TruVision IP dome:

TVD-N210V-2-N(-P) (VGA)

TVD-M1210V-2-N(-P) (1.3 megapixel)

TVD-M2210V-2-N(-P) (2 megapixel)

TVD-M3210V-2-N(-P) (3 megapixel)

TruVision IP IR dome:

TVD-N245V-2-N(-P) (4CIF WDR, D/N)

TVD-M1225V-2-N(-P) (1.3 megapixel, D/N)

TVD-M2225V-2-N(-P) (2 megapixel, D/N, IR)

TVD-M3225V-2-N(-P) (3 megapixel, D/N, IR)

TVD-M5225V-4-N(-P) (5 megapixel, D/N, IR)

TruVision IP wedge dome:

TVD-N210W-4-N(-P) (VGA)

TVD-M2210W-4-N(-P) (2 megapixel)

Features

This section describes the camera features.

Supports TCP/IP, HTTP, DHCP, DNS, DDNS, RTP/RTCP, PPPoE, SMTP,

NTP protocols

Programming and setup through a browser interface

Live viewing over the network

50/60 Hz selectable flicker control

0BChapter 1: Introduction

2 TruVision IP Dome Open-Standards User Manual

Mono, bi-directional audio

Digital pan/tilt/zoom (PTZ)

Supports remote upgrades and maintenance

H.264 video compression with dual capability

Supports full HD, HD, 4CIF, 2CIF, CIF and QCIF

SDHC card for local storage (dome cameras only)



TruVision IP Dome Open-Standards User Manual 3

Chapter 2

Installation

This chapter provides information on how to install the TruVision IP dome and

wedge dome cameras.

Installation environment

When installing your product, consider these factors:

• Electrical: Install electrical wiring carefully. It should be done by qualified

service personnel. Always use a proper PoE switch or a 12 VDC UL listed

Class 2 or CE certified power supply to power the camera. Do not overload

the power cord or adapter.

• Ventilation: Ensure that the location planned for the installation of the

camera is well ventilated.

• Temperature: Do not operate the camera beyond the specified temperature,

humidity or power source ratings. The operating temperature of the camera is

between -10 to +60°C (14°F to 140°F). Humidity is below 90%.

• Moisture: Do not expose the camera to rain or moisture, or try to operate it in

wet areas. Turn the power off immediately if the camera is wet and ask a

qualified service person for servicing. Moisture can damage the camera and

also create the danger of electric shock.

• Servicing: Do not attempt to service this camera yourself. Any attempt to

dismantle or remove the covers from this product will invalidate the warranty

and may also result in serious injury. Refer all servicing to qualified service

personnel.

• Cleaning: Do not touch the sensor modules with fingers. If cleaning is

necessary, use a clean cloth with a some ethanol and wipe the camera

gently. If the camera will not be used for an extended period of time, put on

the lens cap to protect the sensors from dirt.

1BChapter 2: Installation

4 TruVision IP Dome Open-Standards User Manual

Package contents

Check the package and contents for visible damage. If any components are

damaged or missing, do not attempt to use the unit; contact the supplier

immediately. If the unit is returned, it must be shipped back in its original

packaging.

Package contents:

•Camera

•Hex wrench

•Mounting plate (except wedge dome cameras)

•Video cable for testing (except wedge dome cameras)

•Multilingual quick start guide

•CD with user manual in several languages

CAUTION: Use direct plug-in UL listed power supplies marked Class 2/CE

certified or LPS (limited power source) of the required output rating as listed on

the unit.

Cable requirements

For proper operation, adhere to the following cable and power requirements for

the cameras. Category 5 cabling or better is recommended. All network cabling

must be installed according to applicable codes and regulations.

Table 1 below lists the requirements for the cables that connect to the camera.

Table 1: Recommended cable requirements

Cable type

Requirements

Data

For RS-485: 22 gauge (0.64 mm) shielded, two-conductor, twisted-pair

(STP) cable.

Video

75 ohm RS-59 coaxial cable with BNC ends

Power

12 VDC cable

1BChapter 2: Installation

TruVision IP Dome Open-Standards User Manual 5

Camera dimensions

Figure 1: IP dome and IR dome cameras

Figure 2: IP wedge dome camera

Setting up the camera

Note: If the light source where the camera is installed experiences rapid, wide-

variations in lighting, the camera may not operate as intended.

To quickly put the dome camera into operation:

1. Prepare the mounting surface.

2. Connect the power cable (optional), alarm I/O cables, RS-485 cable, audio

cables and network cable to the camera. See “Dome and IR dome camera

connections” on page 7.

3. Mount the camera to the ceiling using the appropriate fasteners. See

“Mounting the dome cameras on a ceiling ” on page 11.

1BChapter 2: Installation

6 TruVision IP Dome Open-Standards User Manual

4. Set up the camera’s network and streaming parameters so that the camera

can be controlled over the network. See “Chapter 3 Network and streaming

configuration” on page 15.

5. Program the camera to suit its location. See “Chapter 4 Camera

configuration” on page 27.

To quickly put the wedge dome camera into operation:

1. Prepare the mounting surface.

2. Connect the power and network cables to the camera. See “Wedge dome

camera connections” on page 8.

3. Mount the camera to the ceiling using the appropriate fasteners. See

“Mounting the wedge dome cameras on a ceiling” on page 11.

4. Set up the camera’s network and streaming parameters so that the camera

can be controlled over the network. See “Chapter 3 Network and streaming

configuration” on page 15.

5. Program the camera to suit its location. See “Chapter 4 Camera

configuration” on page 27.

Connecting the devices

A qualified service person, complying with all applicable codes, should perform

all required hardware installation.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Interlogix Telecamera di sicurezza

Interlogix

Interlogix TruVision TVP-5201 Foglio di istruzioni

Interlogix

Interlogix UltraView Manuale utente

Interlogix

Interlogix True Vision TVP-5104 Manuale utente

Interlogix

Interlogix UVC-XP4DN-HR Manuale utente

Interlogix

Interlogix FW5.1 Manuale utente

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TruVision 4 IP Series Foglio di istruzioni

Interlogix

Interlogix TruVision Line Manuale utente

Interlogix

Interlogix TVW-1120 Manuale utente

Interlogix

Interlogix TruVision TVP-5104 Foglio di istruzioni

Interlogix

Interlogix TruVision TVB-2402 Manuale utente

Interlogix

Interlogix TruVision TVD-2401 Manuale utente

Interlogix

Interlogix UVC-XP4DN-HR Manuale utente

Interlogix

Interlogix TVD-5110-3 Manuale utente

Interlogix

Interlogix TVB-2201 Manuale utente

Interlogix

Interlogix Ultra View UVD-6120VE-2 Manuale utente

Interlogix

Interlogix TVB-5301 Manuale utente

Interlogix

Interlogix UltraView UVC-6130-1-N Manuale utente

Interlogix

Interlogix TruVision TVD-2404 Manuale utente

Interlogix

Interlogix TVD-5125TE-3 Manuale utente

Interlogix

Interlogix 4 SERIES Foglio di istruzioni

Interlogix

Interlogix TruVision TVC-7120-1-N Manuale utente

Interlogix

Interlogix TruVision TVB-2401 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente