Intermatic ET100 SERIES Manuale del proprietario

ET100 SERIES EASY-SET BASIC PROGRAMMING

RESET TIME SWITCH:

1. Place the two position switch to AUTO and the three position

switch to RUN.

2. Press the RESET switch for 3-5 seconds to reset the

microprocessor memory and clear all programmed information. The

display will flash 12:00 AM.

NOTE: Do not press the RESET switch after programming has begun

or you will loose all of your programmed information.

TO SET PRESENT TIME OF DAY:

1. Place the two position switch to AUTO and the three position switch

to TIME SET.

2. Press the HOUR and MIN buttons separately to select the current

time of day. Note that this timer is a 12 hour AM/PM time clock.

TO PROGRAM TIMES :

1. Place the three position switch to PROGRAM. Note that the display

now shows 0:00 1 for Event #1. There are 8 possible programmed

times (events), 4 ON and 4 OFF. All available events need not be

used.

2. Press the HOUR and MIN buttons separately to program the first

ON time desired.

3. Press the EVENT button once. Note that the display now shows

0:00 2 for Event #2.

4. Press the HOUR and MIN buttons for the first OFF time. If more

than 1 ON and 1 OFF time (event) is required per day repeat this

procedure for up to 4 ON and 4 OFF times (events).

5. Return the three position switch to the RUN position and make sure

the two position selector switch is in the AUTO position.

TO REVIEW PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button to review each of the 8 set points.

TO CHANGE PROGRAMMED TIMES:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to change is

displayed.

3. Press the HOUR and MIN buttons separately to change the

displayed time to the new time desired.

4. Press the EVENT button to proceed to the next programmed event

to change if desired and follow previous procedure. If not return the

three position switch to the RUN position.

TO DELETE A PROGRAMMED TIME:

1. Place the three position switch to PROGRAM.

2. Press the EVENT button until the desired time to delete is

displayed.

3. Press the ON/OFF button twice to delete that time. The display will

now show 0:00 and the event number.

4. Return the three position switch to RUN.

TO OVERRIDE PROGRAM:

Program can be overridden at any time by placing the two position

switch to MANUAL. Programmed set times will be maintained but will

not operate the controlled load automatically.

TO MANUALLY OPERATE LOAD:

1. Place the two position switch to either MANUAL or AUTO.

2. Place the three position switch to RUN and depress the ON/OFF

button.

NOTE: The display will show your load toggle ON or OFF.

TO OPERATE TIMER:

Place the two position switch to AUTO and the three position switch to

RUN.

NOTE: When finished programming you may have to toggle your load

ON or OFF depending on the state it should be in at that time by

depressing the ON/OFF button.

NOTE: For assistance please contact Intermatic Technical Services at

815-675-7000.

Indice

Altri manuali Intermatic Interruttore

Intermatic

Intermatic T7802B Manuale

Intermatic

Intermatic T1475BR Manuale

Intermatic

Intermatic T7805B Manuale

Intermatic

Intermatic T101 Manuale

Intermatic

Intermatic R8806P101C Manuale

Intermatic

Intermatic T1976 Manuale

Intermatic

Intermatic ET70115C Manuale utente

Intermatic

Intermatic T105 Manuale

Intermatic

Intermatic ET1100 Series Guida

Intermatic

Intermatic T173 Manuale

Intermatic

Intermatic CA600 Manuale utente

Intermatic

Intermatic T8845PV Manuale

Intermatic

Intermatic IDIGITAL DT104 Guida all'installazione

Intermatic

Intermatic HB12R Manuale

Intermatic

Intermatic FM1D14 Series Manuale utente

Intermatic

Intermatic T2006 Manuale

Intermatic

Intermatic T1975E Manuale

Intermatic

Intermatic T21004R Manuale

Intermatic

Intermatic T175CR Manuale

Intermatic

Intermatic EMKB Manuale utente

Intermatic

Intermatic T1871BR Manuale

Intermatic

Intermatic T1906 Manuale

Intermatic

Intermatic T100 Series Manuale utente

Intermatic

Intermatic ET70415CR Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente