Intermec PM4I Manuale utente
Page 1 4/13/2012
[RFID Movement]
[User Manual for Printing Labels]
[1.3]
[RFID Movement]
Page 2 4/13/2012
Table of Contents
Safety Summary................................ 3
Introduction....................................... 4
Media Load –Peel Off ..................... 5
Program Usage.................................. 8
Glossary .......................................... 13
Works Cited .................................... 14
Page 3 4/13/2012
Safety Summary
Intermec assumes no responsibility regarding the CE Directive if
the printer is handled, modified, or installed in any way other than
that described in Intermec’s manuals.
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side doors are open, so
ensure that the doors are closed before you operate the printer.
• Do not open the front/left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the
power is on.
• Make sure that the side door cannot unintentionally swing down
when you have your fingers or hands inside the media
compartment. Risk of injury because of the weight of the side
door!
• Place the printer on an even surface which can support its weight
of approximately 13.5 kg (30 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the printer
or protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning.
(Intermec)
Page 4 4/13/2012
Introduction
The following is a user’s manual for the purpose of printing
RFID labels with an Intermec PM4I label printer using Seagull
Scientific Bartender Software.
Page 5 4/13/2012
Media Load –Peel Off
The EasyCoder PM4i can print on labels, tickets, tags, and
continuous stock in various forms. This section describes the case
when self-adhesive labels are separated from the liner immediately
after printing, which requires optional integral self-strip unit with
liner take-up. This is also known as “Self-strip” operation.
Peel-off operation cannot be performed when an optional fan-fold
guide fitted. Peel-off can only be used for:
• Self-adhesive labels with liner, an optional label-taken sensor can
hold the printing of the next label in a batch until the present label
has been removed.
Note: Save the label indicating the sensitivity number attached to
the media roll. You will need this number to set the media
sensitivity.
Note: Peel-off operation sets high demands on the media in regard
of label stiffness, release characteristics of the adhesive and liner,
resistance against electrostatic charging etc., so the labels will be
dispensed properly. Consult your media supplier or test the media
to ascertain that it is suitable for your application.
(Intermec)
Page 6 4/13/2012
Figure 1: Loading Tags Started
Figure 2: Loading Tags Continued
Page 7 4/13/2012
Figure 3: Finishing Loading Tags
(Intermec)
Page 8 4/13/2012
Program Usage
Step 1
Find the program icon (Bartender) on the desktop and double
click it to open up the printing software.
Figure 4: Program Icon
Page 9 4/13/2012
Step 2
The user is presented with a blank label format which they
have set up in advance; you must then click the print button in
the toolbar
Figure 5: Opening the Program
Page 10 4/13/2012
Step 3
When you select the print button, you will be prompted for the
product code of Field Aviation for part numbers which must
be input in the database prior to use.
Figure 6: Inputting Product Numbers
Altri manuali per PM4I
18
Indice
Altri manuali Intermec Stampante
Intermec
Intermec EasyCoder 4420 Manuale
Intermec
Intermec 4630 Manuale utente
Intermec
Intermec PR2 Manuale utente
Intermec
Intermec PR2 Manuale utente
Intermec
Intermec 6804DM Manuale del prodotto
Intermec
Intermec EasyCoder PC4 Manuale utente
Intermec
Intermec EasyCoder 601XP Manuale utente
Intermec
Intermec EasyCoder PD42 Manuale utente
Intermec
Intermec EasyCoder E4 Istruzioni operative
Intermec
Intermec EasyCoder 7421 Manuale utente
Intermec
Intermec EasyCoder 3400d Manuale
Intermec
Intermec EasyCoder 301 Manuale
Intermec
Intermec PM4I Istruzioni per l'installazione
Intermec
Intermec EasyCoder PF4i Manuale utente
Intermec
Intermec EasyCoder PF8 Manuale utente
Intermec
Intermec PF8D Manuale utente
Intermec
Intermec EasyCoder 401 Manuale
Intermec
Intermec PM43 Manuale utente
Intermec
Intermec PM43 Manuale
Intermec
Intermec EasyCoder E4 Manuale utente
