Intimus F-200 Manuale utente
Folder
Operating instructions
F-200
95515 1 12/18
intimus International GmbH, Bergheimer Straße 6-12, 88677 Markdorf / Germany
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
…………………………………………
……………………………………
…………………………………………
…………………………………………
…………………………………………
Thank you for using intimus folder. Please read these operating instructions
before putting the machine into operation and observe the safety precautions.
1. Safety precautions 2
2.Installation 5
3. Names and Functions 6
4. Describing Control Panel 9
5. Handling Paper 10
6. Basic Operation 11
7. Folding Operation 16
8. Correcting Folding 19
9. Troubleshooting 25
10. Maintenance and cleaning 34
11. Specification 37
12. Environmental 39
Safety precautions
Please read these operating instructions
before putting the machine into operation
and observe the safety precautions.
Children must not operate the machine!
Do not reach into the machine!
Safety precautions
2
Long hair can become entangled in cutting
head!
Take care of ties and other loose pieces of
clothing!
Remove any paper clips!
3
Safety precautions
phase socket 110 V / 10 A.
Safety precautions
4
Components which may endanger
the operator are covered!
Connect the power cord to a single
Disconnect from the mains if not
usedfor a long period.
Installation
Attach the first folding plate:
The same way with the second
folding plate.
Attach the second folding plate：
Move the lock lever of the second
folding plate to the position of
"UNLOCK".
Insert the folding plate to the
machine along the slider.
Move the lock lever to the position
of "LOCK".
Slider
Lock lever
Second folding plate
5
First folding plate
Names and Functions
1
2
3
4
5
6
7
9
10
13
6
12
8
11
NO. Name Function
1 First folding plate Guide plate for deciding a paper folding position.
First folding is made using this plate.
2 Top cover Prevents the user from touching the moving parts.
3 Control panel Used when operating the machine. Error
messages are also displayed on the LCD display.
4 Paper receiving tray Receives folded paper ejected out.
5 Stacker rollers Ejects folded paper from the machine.
6 Support paper feed plate Supports paper stacked on the paper feed table.
7 Side guide Holds paper stacked on the paper feed table.
8 Paper feed table Used to stack paper to be folded.
9 Auxiliary feed roller Corrected warping paper
10 Rubber roll Sends paper to the first folding plate.
11 Paper feed ring Feeds paper into the machine.
Names and Functions
7
NO. Name Function
12 Power switch Turns on and off the power.
13 Second folding plate Guide plate for deciding a paper folding position.
Second folding is made using this plate. This plate
is not used when folding paper into two.
Names and Functions
8
NO. Name Function
1 Counter/LCD display Counts up the number of folded paper or displays
the status of the machine.
2 Count button Enter the required number.
3 C (clear) button When the machine is stopped with paper on the
paper feed table, pressing the button for more
than two seconds makes the counted number
return to "0."
When a mis-feed has occurred, pressing this
button clears the message.
4 Stop button When pressed, the machine stops.
5 Start button When pressed, the machine starts folding
operations.
Describing Control Panel
123
45
9
Indice
Altri manuali Intimus Macchina piegatrice
