InWin IW-RS108-07 Manuale utente
1U NVMe Hybrid Storage Server User Manual
IW-RS108-07
2
PREFACE
Thank you for choosing the InWin IW-RS108-07 storage server. This manual is written for system technicians who
are responsible for installation, managing and repairing this server chassis. This document provides an overview of
all the features of the chassis, a list of accessories or other components you may need to finish the installation and
instructions on adding and removing components in the InWin IW-RS108-07. For the latest version of this manual, you
may visit InWin’s server website.
SAFETY INFORMATION
To ensure a safe and smooth operation of your InWin IW-RS108-07, it is essential that you choose an appropriate
location for the system, provide an appropriate operating environment and supply an adequate amount of power for
all components of the system. As you plan for installation, follow the guidelines below to ensure that the system and its
environment are safely and appropriately positioned for efficient operation and service. Your system should be installed
and serviced only by a qualified technician.
Environment Selection:
The system is designed to operate in a typical office environment:
• The location should be clean, dry and free of airborne particles.
• It should be placed in a well-ventilated room, and away from sources of heat including direct sunlight and radiators.
• It should be kept away from sources of vibration or physical shock.
• The space should be accommodated with a properly grounded wall outlet, and with sufficient space to access the
power supply cords.
• The operating environment temperature should be around 0°C to 40°C (32°F to 104°F).
Heed Safety Instructions:
Before working with InWin IPC/storage/SMB server products, we strongly recommend you use this guide as a reference
and follow the safety instructions. The instructions in this manual will help you ensure and maintain compliance with
existing product certifications and approvals. Follow the described, regulated components mentioned in this manual.
Use of non-UL listing products or other regulators may not comply with product regulations in the region(s) in which
the product is sold.
System Power On/Off:
The power button DOES NOT totally turn off the system AC power. To remove the power of the system, you must
unplug the AC power cord from the outlet or the system’s power supply units. Make sure the power cord is unplugged
before you open the chassis, add or remove any components.
3
Hazardous Conditions, Devices and Cables:
Hazardous electrical conditions can be present on/in power supply units and their cables. Disconnect the power cord
and any other devices attached to the server before opening the case. Failing to follow safety procedures will increase
the risk of personal injury or equipment damage.
Electrostatic Discharge (ESD) and ESD Protection:
In most cases, ESD may damage disk drives, electronic boards and other parts. We recommend that you conduct
installation only at an ESD free space. If not possible, perform ESD protection protocol by wearing anti-static wrist
straps attached to the ground on any unpainted metal surface on your server during operation.
Installing or Removing Jumpers:
A jumper is a short length conductor used to close, open or bypass part of an electronic circuit. Jumpers on InWin
backplanes have a small tab on top that you can pick up with your fingertips. Grip the jumper carefully and plug the
jumper to cover the jumper pins on the backplane. Once you need to remove the jumper, grip the jumper and carefully
pull without squeezing.
CAUTION
To avoid damage and maintain your safety, please read the following terms listed below:
1. Do not populate hard drives and turn on the power until the system has stabilized. Make sure hard drives and other
components are properly connected before turning on the system.
2. Tighten or loosen all screws with a screwdriver.
3. Apply the correct screws packed in the accessories box.
4. For your safety, please have at least two people lift and install the unit in its designated area.
5. Before mounting the unit to the cabinet, make sure the rail is installed correctly.
6. When installing and removing any module or part, please use the handles.
4
When you open the IW-RS108-07 box, the contents should include following:
1.1 Box Contents
1 Product Introduction
1 2 3
45
6 7
5
1.2 Accessories Box
No. Item
1• Motherboard Screws x 11
• Motherboard Stand-off Sockets x 11
22.5" HDD Screws x 28
3I/O Shield Screws x 2
4
• Riser Card Screws x 2
• PCIe Gen3x16 Riser Card, Left-facing 90
Degree Design x 1
No. Item
5Power LED 3-pin to 2-pin Adapter x 1
6HDD Tray Mark Label x 1
7Cables Ties and Mounts x 5
83.5"/2.5" (15mm) hot-swap trays x 4
9Slide rail mounting area
10 40 x 56mm PWM easy-swap fans x 6
11 ATX, CEB, EEB M/B mounting area
12 Full-high PCI slot x 1
13 Rear I/O shield mounting area
14 80 Plus Platinum, redundant PSU (750W) or
80 Plus Gold, single PSU (500W)
1Top cover
2Top cover screwless open button
3Top layer backplane
4Bottom layer backplane
5Front controls and indicator
6Pull Tab
72.5" (7mm) hot-swap trays x 4
6
When you open the chassis, it should reflect the diagram’s image.
1.3 General Information
1
1
2
3
4
7
8
12
13
14
11 10
9
56
1 3 54 62
RST L1 L2 SYS ID
7
The IW-RS108-07 supports maximum 8 x hot-swappable 2.5"/3.5" NVMe/SAS/SATA disk bays,
including 4 x 3.5"/ 2.5" (15mm) drive bays and 4 x 2.5" (7mm) drive bays in specific areas.
The control panel, indicators are located on the Front Panel.
1.3.1 Front Panel Controls and Indicators
No. Name Color Status Description
1System Reset Button No LED function Press the button to activate system reset.
2LAN LED (LAN1-LAN2) Amber
Blinking Link between system and network.
Off No data transmission or receiving is occurring.
3Hard Disk LED Green Blinking System HDD accessing.
4System Fail LED
Amber Solid on System is faulty.
Green Solid on System works.
5Chassis ID Button with LED Blue Solid on Press the button to activate system
identification.
6Power ON/OFF Button with LED Blue
Solid on System is powered on.
Off System is off.
123
No. Name Description
1Power Supply Window This window is for installing single or 1U Redundant PSU, please
reference InWin compatibility list to select the compatible models.
2System I/O
(Depends on M/B Specifications)
InWin offers a customized service for 1U I/O shield. For more
Information, please contact InWin’s sales reps.
3Full-Height PCIe Slot x 1 The slot supports standard high profile cards. The bracket should be
removed before using.
8
1.3.2 Rear Panel Conguration
9
Before installing the motherboard, please find the I/O shield from your motherboard package
and install it into the system I/O window. If you cannot find the I/O shield, please check with your
motherboard vendor, or contact InWin for I/O shield OEM service.
2 Hardware Installation
For a quick installation video, please visit 07 Series Motherboard & Expansion Card.
2.1 Motherboard & Expansion Card Installation
The IW-RS108-07 features tool-less trays. Users no longer need to use screws to mount disks, and
can swap drives faster.
For a quick installation video, please visit 07 Series HDD Tray Installation.
2.2 HDD Tray Installation
The IW-RS108-07’s built-in fan modules feature a tool-less design, which makes it easy to maintain.
For a quick installation video, please visit 07 Series Fan Installation.
2.3 Fan Installation
The IW-RS108-07 has an option of single or redundant power supply units. Users can select power
supply according to the environment’s requirements.
For a quick installation video, please visit 07 Series Power Supply Installation.
2.4 Power Supply Installation
10
● 2.4.1 Power Supply Cable Information
500W Single PSU Cable Information
Length Unit: mm
Single PSU Cable Information
PMBUS
PMBus
450mm
24 Pin Main Motherboard
400mm
8 Pin CPU
500mm
8 Pin CPU
500mm
8 Pin BP
400mm
6 Pin BP
600mm
5 Pin BP
400mm
Altri manuali per IW-RS108-07
1
Indice
Altri manuali InWin Server di archiviazione di rete
InWin
InWin IW-RS436-07 Manuale utente
InWin
InWin IW-RN224-03 Manuale utente
InWin
InWin IW-RS224-07 Manuale utente
InWin
InWin IW-RS248-03 Manuale utente
InWin
InWin IW-RS118-03 Manuale utente
InWin
InWin IW-RS424-02M Manuale utente
InWin
InWin Cobra IW-RS424-07 Manuale utente
InWin
InWin IW-RS104-02M Manuale utente
Manuali Server di archiviazione di rete popolari di altre marche
HP
HP NetStorage 6000 Manuale utente
Seagate
Seagate U10 ST320423A Manuale utente
Synology
Synology RackStation RS816 Manuale
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manuale utente
Avid Technology
Avid Technology VideoRAID ST Guida di sicurezza
Western Digital
Western Digital My Cloud Home Duo Manuale utente
