InWin IW-RS224-07 Manuale utente
Table of Contents
PREFACE.....................................................................................................................................1
SAFETY INFORMATION ...............................................................................................................1
CAUTION....................................................................................................................................2
SPECIFICATIONS..........................................................................................................................3
12Gb/s BACKPLANE SPECIFICATIONS...........................................................................................4
1Product Introduction...........................................................................................................5
1.1 Box Contents...............................................................................................................5
1.2 Accessories Box...........................................................................................................6
1.3 General Information....................................................................................................7
1.3.1 Front Panel Controls and Indicators.................................................................................8
1.3.2 Rear Panel Configuration .................................................................................................9
2Hardware Installation.......................................................................................................10
2.1 Motherboard & Expansion Card Installation...............................................................10
2.2 HDD Tray Installation.................................................................................................10
2.3 Fan Installation .........................................................................................................10
2.4 Power Supply Installation..........................................................................................10
2.4.1 Power Supply Cable Information ...................................................................................11
2.5 Connecting Cables.....................................................................................................12
2.5.1 Connecting Expander Through SAS Connectors ............................................................12
2.5.2 Connecting LED Cable, Front Control Panel and Front USB I/O Ports............................13
2.6 Installing the Slide Rail ..............................................................................................14
2.6.1 Identifying the Slide Rail ................................................................................................14
2.6.2 Removing the Inner Rail and Sliding the Intermediate Rail Back...................................14
2.6.3 Attaching the Inner Rail to the Chassis ..........................................................................14
2.6.4 Mounting the Rail Bracket to the Cabinet......................................................................15
2.6.5 Inserting the Chassis to the Cabinet ..............................................................................16
3Backplane Introduction.....................................................................................................18
4Expander Board Introduction ............................................................................................20
5Compatibility Lists ............................................................................................................20
6Q & A................................................................................................................................21
7Technical Support..............................................................................................................22
1
PREFACE
Thank you for choosing the InWin IW-RS224-07. This manual is written for system technicians who
are responsible for installation, troubleshooting, managing and repairing this server chassis. This
document provides an overview of all the features of the chassis, a list of accessories or other
components you may need to finish the installation, troubleshooting methods and instructions on
adding and removing components in the InWin IW-RS224-07. For the latest version of this manual,
you may visit InWin’s server website.
SAFETY INFORMATION
To ensure a safe and smooth operation of your InWin IW-RS224-07, it is essential that you choose
an appropriate location for the system, provide an appropriate operating environment and supply
an adequate amount of power for all components of the system. As you plan for installation, follow
the guidelines below to ensure that the system and its environment are safely and appropriately
positioned for efficient operation and service. Your system should be installed and serviced only by
a qualified technician.
Environment Selection: The system is designed to operate in a typical office environment:
•The location should be clean, dry and free of airborne particles.
•It should be placed in a well-ventilated room, and away from sources of heat including direct
sunlight and radiators.
•It should be kept away from sources of vibration or physical shock.
•The space should be accommodated with a properly grounded wall outlet, and with sufficient
space to access the power supply cords.
•The operating environment temperature should be around 0°C to 40°C (32°F to 104°F).
Heed Safety Instructions: Before working with InWin IPC/storage server products, we strongly
recommend you use this guide as a reference and follow the safety instructions. The instructions in
this manual will help you ensure and maintain compliance with existing product certifications and
approvals. Follow the described, regulated components mentioned in this manual. Use of non-UL
listing products or other regulators may not comply with product regulations in the region(s) in
which the product is sold.
System Power On/Off: The power button DOES NOT totally turn off the system AC power. To remove
the power of the system, you must unplug the AC power cord from the outlet or the system’s power
supply units. Make sure the power cord is unplugged before you open the chassis, add or remove
any components.
Hazardous Conditions, Devices and Cables: Hazardous electrical conditions can be present on/in
power supply units and their cables. Disconnect the power cord and any other devices attached to
the server before opening the case. Failing to follow safety procedures will increase the risk of
personal injury or equipment damage.
2
Electrostatic Discharge (ESD) and ESD Protection: In most cases, ESD may damage disk drives,
electronic boards and other parts. We recommend that you conduct installation only at an ESD free
space. If not possible, perform ESD protection protocol by wearing anti-static wrist straps attached
to the ground on any unpainted metal surface on your server during operation.
Installing or Removing Jumpers: A jumper is a short length conductor used to close, open or bypass
part of an electronic circuit. Jumpers on InWin backplanes have a small tab on top that you can pick
up with your fingertips. Grip the jumper carefully and plug the jumper to cover the jumper pins on
the backplane. Once you need to remove the jumper, grip the jumper and carefully pull without
squeezing.
CAUTION
To avoid damage and maintain your safety, please read the following terms listed below:
1. Do not populate hard drives and turn on the power until the system has stabilized.
Make sure hard drives and other components are properly connected before
turning on the system.
2. Tighten or loosen all screws with a screwdriver.
3. Apply the correct screws packed in the accessories box.
4. For your safety, please have at least two people lift and install the unit in its
designated area.
5. Before mounting the unit to the cabinet, make sure the rail is installed correctly.
6. When installing and removing any module or part, please use the handles.
3
SPECIFICATIONS
Model Name
RS224-07
Industry Standard
EIA-RS310D
M/B Form Factor
ATX (12" x 9.6"), CEB (12" x 10.5"), EEB (12" x 13")
Drive Bay
• External 2.5" screwless hot-swap SSD trays x 24
(Optional: NVMe trays x 8, supports U.2 NVMe SSD)
• Rear 2.5" screwless hot-swap SSD trays x 2 (Supports SAS 12G)
Power Supply
Supports:
• Form factor: 80 PLUS Platinum CRPS
• Watt: 550W/800W/1200W
Indicator
Power LED, LAN1/LAN2/LAN3/LAN4 LED, System LED, ID LED, HDD LED
Front Control Panel
Power on/off, Reset, NMI, ID SW, USB 3.0 x 2
Backplane-1
Mini-SAS HD (SFF-8643), 12Gb/s with expander plus Slimline x 8
Backplane-2
Mini-SAS HD (SFF-8643), 12Gb/s with expander plus Oculink x 8
SAS 12G Expander
Supports Broadcom SAS 35 x 36R expander
Cooling Fan
80 x 38mm PWM hot-swap fans x 4, 12000RPM
Expansion Slot
Low-profile PCIe slots x 7
Material
• Material: SGCC
• Thickness: 1.0mm
Rail Kit
Optional: supports 28" tool-less & ball-bearing slide rails
Product Dimensions
(D x W x H; Chassis Only)
660 x 448 x 87.5mm (26" x 17.6" x 3.4")
Packaging Dimensions
(D x W x H)
845 x 595 x 223mm
Weight (Chassis Only)
• Net weight: 13.45kg
• Gross weight: 16.76kg
Cubic Feet
3.96
Container Information
Single packing with pallets:
• 20': 160pcs
• 40': 368pcs
• 40' HQ: 414pcs
The actual product is subject to change without prior notice. InWin Development Inc. reserves the right
to make any final modifications.
The adjacent image is for reference only. All hardware components and optional parts are not included.
4
Product Dimensions
12Gb/s BACKPLANE SPECIFICATIONS
Backplane-1
Slimline Backplane
Dimensions (W x H)
420mm x 81mm
Backplane Type
Active with expander board
Host Interface
3x SFF-8643, 8 x SFF-8654 Slimline
HDD Interface
24 x SAS/SATA or 16 x SAS/SATA & 8 x NVMe SSD
Backplane-2
Oculink Backplane
Dimensions (W x H)
420mm x 81mm
Backplane Type
Active with expander board
Host Interface
3 x SFF-8643, 8 x SFF-8611 Oculink
HDD Interface
24 x SAS/SATA or 16 x SAS/SATA & 8 x NVMe SSD
5
1Product Introduction
1.1 Box Contents
When you open the IW-RS224-07 box, the contents should include following:
6
1.2 Accessories Box
No.
Name
No.
Name
1
Accessories Box
4
Cable Ties and Mounts x 5
2
Label x 1
5
Power LED 3-pin to 2-pin Adapter x 1
3
Hexagon Head Screws x 12
6
Motherboard Stand-off Sockets x 12
7
1.3 General Information
When you open the chassis, it should reflect the diagram’s image.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali InWin Server di archiviazione di rete
InWin
InWin IW-RS436-07 Manuale utente
InWin
InWin IW-RN224-03 Manuale utente
InWin
InWin IW-RS108-07 Manuale utente
InWin
InWin IW-RS104-02M Manuale utente
InWin
InWin IW-RS248-03 Manuale utente
InWin
InWin Cobra IW-RS424-07 Manuale utente
InWin
InWin IW-RS118-03 Manuale utente
InWin
InWin IW-RS424-02M Manuale utente
Manuali Server di archiviazione di rete popolari di altre marche
HP
HP NetStorage 6000 Manuale utente
Seagate
Seagate U10 ST320423A Manuale utente
Synology
Synology RackStation RS816 Manuale
D-Link
D-Link ShareCenter Pro DNS-1200-05 Manuale utente
Avid Technology
Avid Technology VideoRAID ST Guida di sicurezza
Western Digital
Western Digital My Cloud Home Duo Manuale utente
