IPC ST-35IPC Manuale utente
IP camera tester
User Manual
（V01.00）
Thank you for purchasing the IP camera tester. Please read the manual before using the IP camera
tester and use properly.
For using the IP camera tester safely, please first read the「Safety Information」carefully in the
manual.
The manual should be kept well in case of reference.
Keep the S/N label for after-sale service within warranty period. Product without S/N label will
be charged for repair service.
If there is any question or problem while using the IP camera tester, or damages occurred on the
product, please contact our technical Department.
Content
1 .Safety information...............................................................................................................................1
2. IP Camera Tester Introduction.............................................................................................................2
2.1 General ......................................................................................................................................2
2.2 Packing list ................................................................................................................................2
2.3 Function interface......................................................................................................................3
3. Operation.............................................................................................................................................5
3.1 Installing the Battery..................................................................................................................5
3.2 Instrument connection................................................................................................................6
3.2.1 IP camera connection..............................................................................................................6
3.2.2 Analog camera connection......................................................................................................7
3.2.3 HD Coaxial camera connection...............................................................................................7
3.3 OSD menu .................................................................................................................................8
3.3.1 Lite mode........................................................................................................................8
3.3.2 Drop-down Menu............................................................................................................9
3.3.3 Screen capture...............................................................................................................10
3.3.4 TesterPlay .....................................................................................................................10
3.3.5 Rapid video...................................................................................................................12
3.3.6 IP discovery ...............................................................................................................13
3.3.7 Rapid ONVIF test .........................................................................................................14
3.3.8 IP camera test................................................................................................................26
3.3.9 Video monitor test.........................................................................................................28
3.3.10 CVI camera test...........................................................................................................34
3.3.11 TVI camera test...........................................................................................................39
3.3.12 AHD camera test.........................................................................................................40
3.3.13 Network tool ...............................................................................................................42
（1）PING Test ....................................................................................................................42
（2）IP address scan.............................................................................................................42
（3）Network test (Ethernet bandwidth test) ........................................................................43
（4）Port Flashing................................................................................................................46
（5）DHCP server................................................................................................................47
（6）Trace route...................................................................................................................48
（7）Link monitor ................................................................................................................49
3.3.14 Rapid IP Discovery .....................................................................................................49
3.3.15 Audio Record..............................................................................................................50
3.3.16 Data monitor ...............................................................................................................50
3.3.17 Audio player................................................................................................................51
3.3.18 Video Player................................................................................................................52
3.3.19 RTSP Player................................................................................................................52
3.3.20 Hik test tool.................................................................................................................54
3.3.21 Dahua test tool ............................................................................................................56
3.3.22 Update.........................................................................................................................59
3.3.23 Office..........................................................................................................................60
3.3.24 Browser.......................................................................................................................60
3.3.25 DroiNotes....................................................................................................................61
3.3.26 System Setting.............................................................................................................62
3.3.27 File explorer................................................................................................................66
3.3.28 Theme.........................................................................................................................67
3. 4 Audio test................................................................................................................................69
3.7 DC12V 1A power output.........................................................................................................70
4. Specifications ....................................................................................................................................71
4.1 General Specifications .............................................................................................................71
Page.1.
1 .Safety information
◆The tester is intended to use in compliance with the local rules of the electrical usage and avoid to apply
at the places which are inapplicable for the use of electrics such as hospital, gas station etc.
◆To prevent the functional decline or failure, the product should not be sprinkled or damped.
◆The exposed part of the tester should not be touched by the dust and liquid.
◆During transportation and use, it is highly recommended to avoid the violent collision and vibration of
the tester, lest damaging components and causing failure.
◆Don’t leave the tester alone while charging and recharging. If the battery is found severely hot, the
tester should be powered off from the electric source at once. The tester should not be charged over 8
hours.
◆Don’t use the tester where the humidity is high. Once the tester is damp, power off immediately and
move away other connected cables.
◆The tester should not be used in the environment with the flammable gas.
◆Do not disassemble the instrument since no component inside can be repaired by the user. If the
disassembly is necessary indeed, please contact with the technician of our company.
◆The instrument should not be used under the environment with strong electromagnetic interference.
◆Don’t touch the tester with wet hands or waterish things.
◆Don’t use the detergent to clean and the dry cloth is suggested to use. If the dirt is not easy to remove,
the soft cloth with water or neutral detergent can be used. But the cloth should be tweaked sufficiently.
Page.2.
2. IP Camera Tester Introduction
2.1 General
The 3.5 inch IPS touch screen IP camera monitor is designed for maintenance and installation of IP
cameras, analog cameras,TVI, CVI AHD cameras, as well as testing 4K H.264 /4k H.265 camera by
mainstream, The 480x320 resolution enables it to display network HD cameras and analog cameras in
high resolution. The unit supports many ONVIF PTZ and analog PTZ control. The combination of
touch screen and key buttons make the IP camera tester very user- friendly.
The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP
address searching. You can use the blue cable tracer to locate individual connected cables from a bundle
of cables. Test LAN cable for proper connection termination. Other functions include providing testing
IP and analog at the same time, DC 12V 1A power output and much more. Its portability, user-friendly
design and many other functions make the IP tester an essential tool for all installers or technicians.
2.2 Packing list
1). Tester
2). Adaptor DC12V 1A
3) Network cable tester
4) Polymer lithium ion battery (3.7V DC 3000mAh)
5). BNC cable
6). RS485 cable
9). Output Power cable
10). Audio cable
12). Safety cord
13). Tool bag
14). Manual
Page.3.
2.3 Function interface
1
The charge indicator: it lights red while the battery is being charged. As the
charging is complete, the indicator turns off automatically
2
The RS485 data transmission indicator: it lights red while the data is being
transmitted
3
Press more than 2 seconds, turn on or off the device ,short press to turn on or off
the menu display
4
Confirm key /zoom key
5
Return/Close : Return or cancel while setting parameters of the menu, close or
decrease the aperture
6
Function switching key
Page.4.
Top interface
Left interface Right interface
Bottom interface
7
Video signal input（BNC interface）/AHD,CVI and TVI input (BNC interface)
8
DC5V1.5A USB charging interface
Page.5.
9
DC12V1A power output , for provisional DC power supply
10
RS485 Interface: RS485communication for the PTZ
11
Audio input
12
Battery slot
13
Lan port
14
Micro SD card moveable (supports up to 32GB)
3. Operation
3.1 Installing the Battery
The tester has built-in lithium ion polymer rechargeable battery. The battery cable inside battery
cabin should be disconnected for safety during transportation!
Prior to the use of the instrument, the battery cables inside the battery cabin should be well
connected.
Pressing the key continuously can power on or off the tester.
Notice:Pls use the original adaptor and connected cable of the device!
When the battery icon is full or the charge indicator turns off automatically, indicate the battery
charging is completed
Notice: When the Charge Indicator turns off, the battery is approximately 90%
charged. The charging time can be extended for about 1 hour and the charging time within 12
hours will not damage the battery.
Notice :Press the key several seconds to restore the default settings when the
Page.6.
instrument works abnormally.
Multi-meter: the red and black multi-meter pen must insert the corresponding port.
Warnings:Instrument communication port is not permitted access circuit voltage over 6V,
otherwise damage the tester.
3.2 Instrument connection
3.2.1 IP camera connection
Power an IP camera with an independent power supply, then connect the IP camera to the IPC tester’s
LAN port, if the link indicator of the tester’s LAN port is green and the data indicator flickers, it means
the IP camera and the IPC tester are communicating. If the two indicators don’t flicker, check if the IP
camera is powered on or the network cable is not functioning properly.
Note:1) If the IP camera requires PoE power, then connect the IP camera to the IP tester’sLAN port .
The tester will supply PoE Power for the IP camera. Click on the icon labeled POE to turn the PoE
Power off or on.
2) If use the tester’s menu to turn off the tester’s PoE power supply, the PoE switch and the power
sourcing equipment are allowed to connect to the tester’s PSE port, and the PoE power will be supplied
to the IP camera by the tester’s LAN port. On this condition, the tester cannot receive data from IP
camera, but the computer connected to the PoE switch can receive the data via the the tester.
Indice
Altri manuali IPC Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
