IWILL DN800 Manuale utente

IWILL DN800/DNSV

Motherboard

User’s Manual

FB23634300

User’s Manual

DN800 Motherboard

Preface

Disclaimer

The manufacturer makes no representations or warranties regarding the

contents of this manual and specifically disclaims any implied warranties

of merchantability or fitness for any particular purpose. Furthermore, the

manufacturer reserves the right to revise this publication or make changes

in the specifications of the product described within it at any time without

notice and without obligation to notify any person of such revision or

change.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corp.

Intel and Xeon are registered trademarks of Intel Corporation. Other prod-

uct names used in this manual are the properties of their respective owners

and are acknowledged.

This publication, including all photographs, illustrations and software,

Neither this manual, nor any of the material contained herein, may be re-

produced without the express written consent of the manufacturer. IWILL

Important

The information in this document is subject to change without notice.

iii

User’s Manual

DN800 Motherboard

1: Overview .............................................................................1-1

Packing list ................................................................................. 1-1

Safety Notice.............................................................................. 1-2

DN800/DNSV Specification ..................................................... 1-5

2: Components and Jumper Setting ..........................2-1

Mainboard Map.......................................................................... 2-1

Components List........................................................................ 2-2

Jumper Setting ........................................................................... 2-3

Rear Panel I/O Ports .................................................................. 2-5

Additional I/O Connectors ........................................................ 2-9

EPS12V Power Connectors ..................................................... 2-14

Primary IDE Connectors ......................................................... 2-15

CPU/ System Fan Connectors ................................................. 2-16

3: Hardware Installation ..................................................3-1

Motherboard Installation ........................................................... 3-1

Installing the CPU and Heatsink Procedures ............................ 3-2

Heatsink Installation Notice ...................................................... 3-8

Memory Installation Procedure ................................................. 3-9

Installing Expansion Cards ........................................................ 3-12

Powering on your System.......................................................... 3-13

able

ontents

Preface

4: BIOS Setup .........................................................................3-1

Starting the BIOS Setup ............................................................ 4-1

Using the BIOS Setup Utility .................................................... 4-3

Main Menu................................................................................. 4-5

Advanced Menu ......................................................................... 4-6

Boot Menu ................................................................................. 4-7

Boot Setting Configuration Submenu ....................................... 4-8

Exit Menu ................................................................................ 4-10

5: OS and rivers Installation .......................................5-1

OS Installation ........................................................................... 5-1

Drivers Installation .................................................................... 5-2

Chapter 1

Overview

Chapter 1

Package

DN800/ DNSV Motherboard

Rear panel I/O shield

Three jumper caps (Extra caps in case original caps get lost)

One Power Installation CD (contains drivers and utilities)

User’s manual

One ATA-66/100 IDE cable

Two SATA cables + one SATA power cable

One Floppy disk drive cable

Two heatsink retention modules

Two Hat Springs for CPU cooler

One Iron backplate

Two CPU Plastic backplates

1-1

Overview

DN800 Motherboard

O v e r v i e w

YOU MUST HAVE ENOUGH SYSTEM INTEGRATION KNOWLEDGE

BEFORE THE INSTALLATION

General Safety Precautions

Keep the area around the Server clean and free of clutter.

Servers weigh a lot. When lifting the system, two people should

lift slowly from opposite ends with their feet spread out to distrib-

ute the weight. Always keep your back straight and lift with your

legs.

Place the chassis top cover and any system components that have

been removed away from the system or on a table so that they won’t

accidentally be stepped on.

While working on the system, do not wear loose items such as neck-

ties and unbuttoned shirtsleeves. They can come into contact with

electrical circuits or get pulled into a cooling fan.

Remove any jewelry or metal objects from your body, which are

excellent metal conductors and can create short circuits and harm

you if they come into contact with printed circuit boards or areas

where power is present.

ESD Precautions

Electrostatic discharge (ESD) is generated by two objects with dif-

ferent electrical charges coming into contact with each other. An elec-

trical discharge is created to neutralize this difference, which can dam-

age electronic components and printed circuit boards. The following

measures are generally sufficient to neutralize this difference before

contact is made to protect your equipment from ESD:

1-2

Chapter 1

Use a grounded wrist strap designed to prevent static discharge.

Keep all components and printed circuit boards (PCBs) in their

antistatic bags until ready for use.

Touch a grounded metal object before removing the board from

the antistatic bag.

Do not let components or PCBs come into contact with your

clothing, which may retain a charge even if you are wearing a wrist

strap.

Handle a board by its edges only; do not touch its components,

peripheral chips, memory modules or contacts.

When handling chips or modules, avoid touching their pins.

Put the motherboard and peripherals back into their antistatic bags

when not in use.

For grounding purposes, make sure your computer chassis provides

excellent conductivity between the power supply, the case, the

mounting fasteners and the motherboard.

After accessing the inside of the system, close the system back up

and secure it to the rack unit with the retention screws after ensur-

ing that all connections have been made.

Operating Precautions

Check package contents

Missing or damaging accessories

Please contact your vendor immediately

Motherboard damage

Please contact your vendor immediately

Prepare minimum system components

Intel Xeon @800MHz FSB Processor

At least one Registered DDR memory module

At least one SATA or IDE HDD

EPS12V Power Supply with 460W or above

1-3

Overview

DN800 Motherboard

O v e r v i e w

Getting Help

If a problem arises with your system during Installation or Operation,

you should first ask your dealer for help as they have most likely config-

ured your system. They generally have the best grasp of your issues and

the fastest response for your symptoms. If your dealer is near your location,

it is recommended that you first bring your system to them to have it ser-

viced instead of attempting to solve the problem yourself.

If those options don’t work for you, IWILL also provides some helpful

resources to help you.

1. Visit IWILL®website at http://www.iwill.net and navigate to this

product’s page which contain links to product updates such as Jumper

settings or BIOS updates.

2. The FAQ (Frequently Asked Questions) sections in the IWILL

website are often helpful since other users often have the same

questions.

3. Email us at: [email protected] and we will try to answer your ques-

tions within 5 business days.

1-4

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali IWILL Scheda madre

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente