Jabra PRO 920 Guida rapida

Altri manuali per PRO 920

9

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Jabra Cuffia

Jabra

Jabra Pro 9470 Mono Manuale utente

Jabra

Jabra Evolve2 40 Manuale utente

Jabra

Jabra MOTION UC Manuale utente

Jabra

Jabra GN9350 - Headset - Convertible Manuale utente

Jabra

Jabra Evolve 75 SE Manuale utente

Jabra

Jabra STONE Manuale di istruzioni

Jabra

Jabra BT 800 Manuale utente

Jabra

Jabra BT3010 - Headset - In-ear ear-bud Manuale utente

Jabra

Jabra BT2015 Manuale utente

Jabra

Jabra JX20 - Pura - Headset Manuale utente

Jabra

Jabra GN Stratus Ultra Manuale utente

Jabra

Jabra GO 6470 Manuale utente

Jabra

Jabra M5390 Manuale utente

Jabra

Jabra SPORT Manuale utente

Jabra

Jabra EXTREME2 Manuale utente

Jabra

Jabra SUPREME UC Manuale di istruzioni

Jabra

Jabra BT530 - Headset - In-ear ear-bud Manuale utente

Jabra

Jabra BT 320S Manuale utente

Jabra

Jabra BT8030 - Headset - Convertible Manuale utente

Jabra

Jabra PRO 9460 - PRO 9460-DUO Manuale utente

Jabra

Jabra BT2040 - Headset - In-ear ear-bud Manuale utente

Jabra

Jabra EVOLVE2 50 Manuale utente

Jabra

Jabra STYLE Manuale utente

Jabra

Jabra JX 10 CARA Manuale utente

Manuali Cuffia popolari di altre marche

Sena

Sena SMH10 Manuale utente

IASUS

IASUS Stealth IA-NT4-BASIC-BT Manuale utente

Sennheiser

Sennheiser EPOS ADAPT 230 Manuale utente

Doro

Doro Flexus HS2005 Manuale utente

GE

GE 98971 Manuale utente

Hama

Hama 00184070 Manuale utente

Plantronics

Plantronics Blackwire 3200 Series Manuale utente

Blue Tiger

Blue Tiger Advantage PLUS Manuale utente

Jawbone

Jawbone Icon Manuale utente

Roxcore

Roxcore Flow A+ Manuale utente

Turtle Beach

Turtle Beach XP 510 Manuale utente

Philips

Philips SHB6101 Manuale utente

HyperX

HyperX HyperX Cloud Flight Manuale utente

Bose

Bose MIE2 Mobile Manuale utente

HyperX

HyperX cloud ii Manuale utente

Southwing

Southwing SA505 Manuale utente

Plantronics

Plantronics VOYAGER 520 Manuale utente

Blueant

Blueant X5i Manuale utente

AAAHeadsets Installation Note:

How to connect my Jabra PRO 920 with Alcatel Touch 4028, 4038

Prerequisite:

Jabra PRO 920 + Jabra LINK 14201-09

In combination with one of the following phones:

Touch 4028

Touch 4038

Connection:

2-sided end:

Insert the RJ45 plug (red band) into the red socket marked with "AUX" and the RJ10 plug

(blue band) into the blue socket marked with the “phone” symbol of the Jabra PRO 920 base.

2-fold Y-coupling end:

Insert the 3.5 mm audio jack into the headset interface and the RJ12 plug into the bell socket

of the phone. The extra connector socket on the Y-coupling remains free for connection to an

IP phone.

Now you can setup the headset for your phone with either the automatic or manual

configuration.

Automatic configuration:

To start the automatic configuration, please let someone call you on this phone; wait at least

10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

If the automatic configuration does not work, please manually select the MSH mode (using

the voice prompts detailed in the Jabra PRO 920 User Manual Section 7.5).

Base setup:

Set the phone setup switch to position "A".

Microphone volume setting:

Put on the headset and call a colleague, for example.

Now you can select the desired microphone volume using the +/-button.

No settings are usually required on the phone to use a headset. Following the Jabra LINK

3.5mm plug being inserted into the audio jack, a headset symbol should appear in the “Phone

display”.

If the headset symbol does not appear, please check that your phone settings are as

follows:

Phone setup with system software 9.xx and higher

Menu> Settings> Phone> Jack> Headset Activate/Select

Phone setup with system software version below version 9.xx:

Important: The “Force Headset” function must not be activated on the phone, as otherwise it

will not be possible to accept external calls.

Menu> Settings> Phone> Jack>Force Headset OFF

Menu> Settings> Phone> Socket > Activate Headset

Ringtone transfer / phone setup:

Important: The dial tone signal in the headset is only transmitted if one of the following

ringtones is used, e.g., Standard/ Classic / Cold River / Dooing-Dooing. > Menu> Settings>

Dial Tone > Internal / External

Should the dial tone signal transfer not work although you have setup the correct ringtone,

please check the following settings:

Menu > Settings > Phone > Internal/External, more options

No sound, Progressive, Beeps> all points must be set to "OFF".

Calls being made via the headset can be connected / forwarded as follows:

Dial the phone number > "Forward" will now appear in the phone display > now press on to

the appropriate function key next to the phone display > thereafter you must end the call with

the button marked "Handset"