Jensen Jsbw-650 Manuale utente

MODEL: JSBW-650

Please read this instruction manual carefully and keep it for future reference.

BLUETOOTH SOUNDBAR SYSTEM

INSTRUCTION MANUAL

AC/DC adapter

to the wall outlet having AC 100-240V~, 50/60 Hz.

Insert the small plug from supplied AC/DC adaptor to DC IN jack

on the rear of the unit and insert the AC/DC adaptor

NOTE:This AC/DC adapter is intended to be

correctly operated in a vented indoor wall outlet.

Ventilation

When placing the Sound Bar on an entertainment center, bookshelf, or any type of

enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar

for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat

generated from the Sound Bar could produce a potential heat hazard.

2. Placing on floor in vertical

1. Placing the device on table

Fixing the base with the unit body by supplied screw.

Put the unit on flat surface floor.

AUX-IN 2

VOLUME

TUNE

VOLU ME

SOURCE

To the DC IN jack on the rear of unit.

MOUNTING

We recommend having this speaker professionally mounted. By using the included

wall mounting accessories, the sound bar can be mounted onto a wall.

1. Mark the position of the mounting screws on the wall using a pencil.

2. Drill the supplied screws directly into the marks that you have made on the wall

3. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.

1. Mark the position of the mounting screws on the wall using a pencil.

3. Insert the supplied plastic inserts into the holes by hammer.

5. Put the sound bar onto the mounting brackets. Make sure they are firm and stable.

(1) (2)

2.2Mountingonthewoodenwall:

Holes distance:26.9 inches

supplied Metallic Bracket

in same horizontal level

supplied Screws

Holes distance:26.9 inches

supplied Screws

in same horizontal level

supplied Screws

supplied Metallic Bracket

supplied Plastic Inserts

Drill holes by powerful electrical drill. supplied Metallic Bracket

supplied Plastic Inserts

supplied Screws

supplied Metallic Bracket

2. Drill holes by a powerful electric drill( Not supplied )( Drill head diameter:6.0 mm ).

4. Secure the supplied screws into the plastic inserts with the Metallic Bracket.

with the Metallic Bracket as the figure above.

2. Mounting the device on wall

1. Mounting the device on wooden wall

in same horizontal level

26.9 inches

105.6

Front View

Back View

PRODUCT OVERVIEW

MODE INDICATOR

FM ANT (Antenna) AUX-IN 1 jacks DC IN jack

Side View

AUX-IN 2 Jack POWER/SOURCE

VOLUME UP

VOLUME DOWN

TUNE UP

DC 22V 2.5 A

AUX-IN 1

FM ANT

DC 22V 2.5A

AUX-IN 1

FM ANT

AUX-IN 2

VOLUME

TUNE

VOLUME

SOURCE

STANDBY

PAIR

BATTERY INSTALLATION

STALLATION

- Before installation

Remove and discard the insulation tab. Out of the box the Remote Control

has a battery and will be usable after the tab is removed.

-Replace battery for the remote control

1. Push and slide out the battery holder as Figure 1 below.

2. Replace the battery with a new CR2025 button cell with the polarity (+)

side upward.

3. Slide into the battery holder.

BATTERY PRECAUSIONS

• Never recharge the batteries, apply heat to them or take them apart.

• Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

• Do not throw the batteries in fire!

• Attention should be drawn to the environmental aspects of battery disposal.

• If the remote control is not going to be used for a long time, remove the battery

to avoid damage caused by battery leakage corrosion.

POWER CONTROL

- To turn the unit on

• Connect the supplied AC/DC adapter.

• Press STANDBY button to turn on the unit.

- To turn the unit off

• Press STANDBY button on the remote control or hold STANDBY button in

NOTE:

If the unit is not used for a long period of time, disconnect the power adapter.

1. STANDBY

6. /TUNE -

7. ( play/pause )

10. BASS +

4. BASS -

8. (mute)

14. /TUNE +

13. EQ ( Equalizer )

2. VOL- ( volume down )

5. TREBLE -

9. VOL+ ( volume up )

3. SOURCE

12. TREBLE +

REMOTE CONTROL

11. PAIR

the right side of the unit.

FM RADIO

Power on the unit and press the SOURCE

. Press and hold TUNE+ button at control plate

-During playback

•Press MUTE button to turn off the sound. Press again to resume the sound.

•Press VOLUME+/- buttons to adjust the volume level.

•Press BASS+/- buttons to adjust bass level.

•Press TREBLE+/-buttons to adjust treble level.

•Press EQ button to switch between POP/JAZZ/CLAS /ROCK/NORM.

button on remote control or the SOURCE

button on control plate until the indicator light turns purple.

NOTE:When power is off,or unplugging the adapter,station need to be re-searched.

1. Press TUNE+ button on control plate to search manually to play the searched station.

. Press and hold

4or

to search station automatically until a

station is found.

3. Press button on control plate to search manually to play the searched

or station.

on remote control to search station automatically until a

station is found.

- RCA AUX IN sources may include

•TV/DVD/VCR

- RCA AUX IN connection

1. Connect the RCA audio cable (supplied) to the audio output jack on DVD

player and AUX 1 or AUX 2 jack on the rear of DVD.

2. Press SOURCE button repeatedly until the indictaor turns green.

-During playback

•Press MUTE button to turn off the sound. Press again to resume the sound.

•Press VOLUME+/- buttons to adjust the volume level.

•Press BASS+/- buttons to adjust bass level.

•Press TREBLE+/-buttons to adjust treble level.

•Press EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.

White

Red

AUX-IN 1 CONNECTION

DC 22V 2.5A

AUX-IN 1

FM ANT

- AUX IN source may include:

•Personal audio players

•Personal computers or laptops

- AUX IN connection:

1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or

2. Power on the unit and press SOURCE button repeatedly un

Set your personal audio player/computer to play.

NOTE: If there is no sound or if the volume is not loud enough, you may

increase the setting on the source.

-During playback

•Press MUTE button to turn off the sound. Press again to resume the sound.

•Press VOLUME+/- buttons to adjust the volume level.

•Press BASS+/- buttons to adjust bass level.

•Press TREBLE+/-buttons to adjust treble level.

•Press EQ button to switch between POP/JAZZ/CLAS/ROCK/NORM.

Connect to the output

socket of external

audio devices (Mp3,

Computer, ext.)

To AUX IN Jac

on the unit

AUX-IN 2 CONNECTION

til the indicator

turns orange.

AUX- IN 2

VOLUM E

TUNE

VOL UME

SOURCE

INE/Audio output of the personal audio player and the AUX-IN 2 jack on the

side of the unit.

Altri manuali per jsbw-650

Indice

Altri manuali Jensen Sistema di altoparlanti

Jensen

Jensen POWERSTATION POWERSTATION Manuale utente

Jensen

Jensen SMPS-125 Manuale utente

Jensen

Jensen 400 Manuale utente

Jensen

Jensen Sonix JW250 Manuale utente

Jensen

Jensen EHT-2 Manuale utente

Jensen

Jensen Groove 310 Manuale utente

Jensen

Jensen smps-550 Manuale utente

Jensen

Jensen smps-182 Manuale utente

Manuali Sistema di altoparlanti popolari di altre marche

JVC

JVC CA-MXK5R Manuale utente

LG NB4532B Manuale utente

JVC

JVC CA-FSH100 Manuale utente

5Core

5Core Pro Series Manuale utente

EAW

EAW MQV1394e Manuale utente

Lynx

Lynx GXR-LA10A Manuale utente

iLive

iLive ITB066B Manuale utente

RDX

RDX QuickStation 4 Manuale utente

Electro-Voice

Electro-Voice S-122 Manuale utente

Sven

Sven SPS-619 GOLD Manuale utente

Pioneer

Pioneer CS-7070 Manuale utente

EAW

EAW UB82e Manuale utente

Sondpex

Sondpex Active Speaker System and Digital Music... Manuale utente

JVC

JVC NX-PN7 Manuale utente

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuale utente

Yamaha

Yamaha NX-A01 - Speaker Sys Manuale utente

SE Audiotechnik

SE Audiotechnik I-LINE Manuale utente

Gemini

Gemini WRX-843 Series Manuale utente

Jensen jsbw-650 Manuale utente

Manuali Sistema di altoparlanti popolari di altre marche