Johnson 40-6551 Manuale utente

Electronic Self-Leveling Horizontal

Exterior Rotar Laser Kit

Model No. 40-6551

Instruction Manual

Congratu ations on your choice of this E ectronic Se f-Leve ing

Horizonta Exterior Rotary Laser. We suggest you read this instruction

manua thorough y before using the instrument. Save this instruction

manua for future use.

This is a Class a laser tool and is manufactured to comply with CFR 21,

parts 1040.10 and 1040.11 as well as international safety rule EC 285.



8488H-English_Manuals 11/11/14 2:36 PM Page 1

Table of Contents

1. Kit Contents

2. Features and Functions

3. Safety nstructions

4. Location/Content

of Warning Labels

5. Location of Parts/Components

6. Operating nstructions

7. Using the Product

8. Self-Check & Fine Calibration

9. Technical Specifications

10. Application Demonstrations

11. Care and Handling

12. Product Warranty

13. Warranty Registration

14. Accessories

15. Trouble Shooting

1. Kit Contents

Description for Model 40-6551 Qty.

Electronic Self-Leveling Horizontal Exterior Rotary Laser

NiMH Rechargeable Battery Pack 1

6.4V Battery Adapter 1

4 “C” Alkaline Battery Pack (batteries not included) 1

Detector with 9V Battery 1

nstruction Manual with Warranty Card 1

Hard-Shell Carrying Case 1

2. Features and Functions

• Large ±5° electronic auto-level range. When beyond the leveling

range, the laser line will flash, rotation of the beam will stop, and an

audible alarm will activate.

• Vibrate mode ignores slight movements as in windy conditions.

• Height of nstrument/T LT alarm function ensures product accuracy.

• Projects a laser horizontal plane.

• Dust and rain resistant.

• Detector included for more convenient operation.

8488H-English_Manuals 11/11/14 2:36 PM Page 2

3. Safety Instructions

Please read and understand all of the following instructions, prior

to using this tool. Failure to do so, may void the warranty.

DANGER!

Class a Laser Product

Max. Power Output: ≤5mW

Wavelength: 625-645nm

THIS T L EMITS LASER RADIATI N.

D N T STARE INT BEAM.

AV ID DIRECT EYE EXP SURE.

ATTENTION IMPORTANT

• Read all instructions prior to operating this laser tool. Do not remove any labels from tool.

• Do not stare directly at the laser beam.

• Do not project the laser beam directly into the eyes of others.

• Do not set up laser tool at eye level or operate the tool near a reflective surface as

the laser beam could be projected into your eyes or into the eyes of others.

• Do not place the laser tool in a manner that may cause someone to unintentionally

look into the laser beam. Serious eye injury may result.

• Do not operate the tool in explosive environments, i.e. in the presence of gases or

flammable liquids.

• Keep the laser tool out of the reach of children and other untrained persons.

• Do not attempt to view the laser beam through optical tools such as telescopes as

serious eye injury may result.

• Always turn the laser tool off when not in use or left unattended for a period of time.

• Remove the batteries when storing the tool for an extended time (more than 3 months)

to avoid damage to the tool should the batteries deteriorate.

• Do not attempt to repair or disassemble the laser tool. f unqualified persons attempt

to repair this tool, warranty will be void.

• Use only original Johnson®parts and accessories purchased from your Johnson®

authorized dealer. Use of non-Johnson®parts and accessories will void warranty.

8488H-English_Manuals 11/11/14 2:36 PM Page 3

4. Location/Content of Warning Labels

8488H-English_Manuals 11/11/14 2:36 PM Page 4

5. Location of Part/Components

Handle

Keypad

Laser Output

Window

Battery Cover

5/8" - 11 Screw

Thread in Bottom

Battery Pack

Locking Screw

Rotary Head

8488H-English_Manuals 11/11/14 2:36 PM Page 5

6. perating Instructions

IMP RTANT: t is the responsibility of the user to verify the

calibration of the instrument before each use.

Battery Installation

Note: Always check to be sure that the laser is off before removing

and replacing battery packs.

Alkalin Batt ry Pack Installation

1. Put 4 “C” batteries into the battery pack

according to polarity direction.

2. Attach the battery pack to the laser.

Ni-MH R charg abl Batt ry Charging

Using the 6.4V battery adapter (included), charge the

rechargeable battery pack directly to the battery pack

(Fig 1.) or while the battery pack is connected to the

laser (Fig. 2). When the charge indicator LED turns

from red to green (after approximately five hours) on

the 6.4V battery adapter (Fig. 3), the Ni-MH recharge-

able battery pack has been fully charged.

Note:

(1) For the first two charges of new

rechargeable batteries, it is recommended

to charge for 12 plus hours.

(2) The unit can still work during charging

with the adapter.

(3) Do not charge alkaline batteries to avoid explosion.

Fig. 1

Fig. 2

Fig. 3

Charging

ndication LED

8488H-English_Manuals 11/11/14 2:36 PM Page 6

(4) Used (discharged) batteries are hazardous waste and should be

disposed of properly.

Before Using the Laser

When you charge the new battery or one which has not been used for

long periods of time, it may not reach full charge until after you have

discharged it fully in use and recharge it several times.

Instrument Usage

1. Put in Ni-MH rechargeable battery pack, or 4 “C” alkaline battery pack.

2. Place the laser on a tripod, connect it to the tripod using the 5/8"

screw thread at the bottom of the laser.

Note: f the laser is inclined beyond the self-leveling

range, the laser will deliver an audible alarm. You will

need to re-position the laser.

3. Press power button to turn power on.

4. Press the Tilt button to lock in the height of the laser.

5. After finishing operation or before moving the laser, turn the power off.

8488H-English_Manuals 11/11/14 2:36 PM Page 7

7. Using the Product

perating Panel

Power LED

LED On = power on

LED Off = power off

LED Flashing = low battery

Tilt Mode LED

LED Flashing Slowly = laser is entering Tilt mode

LED On = laser Tilt mode is on

LED Flashing Quickly = laser has been moved and height of laser

may have been changed

LED Off = Tilt mode is turned off

Vibrate/V-W-S Mode LED

LED On = laser is in vibrate/V-W-S mode

LED Off = laser is not in vibrate/V-W-S mode

Power LED

Tilt Mode LED

Tilt Mode

Button

Vibrate/V-W-S Mode LED

Vibrate/V-W-S

Mode Button

Power On/Off Button

8488H-English_Manuals 11/11/14 2:36 PM Page 8

Power n/ ff

1. Press the power on/off button to power the laser on. The

power LED will light up and the laser will electronically self-

level itself, with rotation occurring once the unit is level at 600

rpms. The laser will automatically enter into the Tilt mode and the

Tilt LED will flash slowly for 30 seconds then become solid.

2. Press the power on/off button again to power off.

Low Battery Indication

f the power LED is flashing, the battery is low. To ensure normal

operation, replace alkaline batteries or charge the rechargeable

Ni-MH battery pack.

Alarm If Beyond Range

f the laser is inclined beyond the self-leveling range of ±5°, it will

deliver an audible alarm, and will not rotate. You will need to

re-position the laser until it is within the leveling range.

Tilt Mode Button

After turning on the laser, the laser will self-level and begin to

rotate. The Tilt mode LED will blink for 30 seconds after the

laser begins to rotate. During these 30 seconds if the laser is moved,

the laser will stop rotating, re-level and begin to rotate again. After 30

seconds, the Tilt mode LED will stop blinking and will become solid. f

the laser is moved when the Tilt mode LED is solid, the laser will stop

rotating. The laser beam will blink on and off and the Tilt mode LED

will blink quickly alerting the user the height of the laser may have

been changed. Pressing the tilt mode button on the laser keypad will

8488H-English_Manuals 11/11/14 2:36 PM Page 9

turn off the tilt mode and will allow the laser to re-level and start

rotating again. Press the tilt mode button again to enter tilt mode.

Vibrate V-W-S Button

Press the Vibrate V-W-S button and the Vibrate V-W-S LED

will turn on, which means the laser is in vibrate mode.

Vibrate mode allows continuous operation during high winds,

vibrations and shocks. Slight movements are ignored and the laser

only enters Tilt mode if significant movement occurs. Press the

Vibrate V-W-S button again to turn vibrate off.

8488H-English_Manuals 11/11/14 2:36 PM Page 10

Indice

Altri manuali Johnson Livello laser

Johnson

Johnson 40-6602 Manuale utente

Johnson

Johnson 40-6636 Manuale utente

Johnson

Johnson 40-6692 Manuale utente

Johnson

Johnson 40-0612 Manuale utente

Johnson

Johnson 40-6680 Manuale utente

Johnson

Johnson 40-6532 Manuale utente

Johnson

Johnson 40-6688 Manuale utente

Johnson

Johnson 40-6685 Manuale utente

Johnson

Johnson 40-6601 Manuale utente

Johnson

Johnson 40-6174 Manuale utente

Johnson

Johnson 40-6646 Manuale utente

Johnson

Johnson 1880-2400 Manuale utente

Johnson

Johnson 40-6584 Manuale utente

Johnson

Johnson 1888-0700 Manuale utente

Johnson

Johnson 40-6641 Manuale utente

Johnson

Johnson 40-6080 Manuale utente

Johnson

Johnson 40-6926 Manuale utente

Johnson

Johnson 40-6184 Manuale utente

Johnson

Johnson 40-6080 Manuale utente

Johnson

Johnson 40-6028 Manuale utente

Johnson

Johnson 40-6250 Istruzioni operative e di manutenzione

Johnson

Johnson 40-6060 Manuale utente

Johnson

Johnson 40-6647 Manuale utente

Johnson

Johnson 40-6065 Manuale utente

Manuali Livello laser popolari di altre marche

Nedo

Nedo ET-5 Manuale utente

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuale utente

LaserLiner

LaserLiner X2-Laser Manuale utente

Spectra

Spectra LL300N Manuale utente

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuale utente

Nedo

Nedo Crossliner 4 Manuale utente

Lasertec

Lasertec FX360G Manuale utente

Flex

Flex ALC 8 Manuale utente

Black & Decker

Black & Decker LZR5 Manuale utente

Cocraft

Cocraft HL 20-SG Manuale utente

Zircon

Zircon iLine Manuale utente

HWH

HWH 310 SERIES Manuale utente

Leica

Leica iCON robot 60 Manuale utente

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuale utente

LaserLiner

LaserLiner ActiveFinder XP Manuale utente

DeWalt

DeWalt DW082 Manuale utente

imex

imex EL20 Manuale utente

Fixturlaser

Fixturlaser NXA D I-0912 Manuale utente