Juniper SSR1500 Manuale utente

Quick Start Guide

SSR1500

IN THIS GUIDE

Step 1: Begin | 1

Step 2: Up and Running | 6

Step 3: Keep Going | 15

Step 1: Begin

SUMMARY

In this guide, we provide a simple, three-step path, to quickly

get the Juniper Networks® SSR1500 appliance up and

running on Juniper Mist™ cloud. You'll learn how to install,

power on, and congure basic sengs for an AC-powered

SSR1500 appliance.

IN THIS SECTION

Meet the SSR1500 | 1

Install the SSR1500 | 2

Power On | 5

Meet the SSR1500

The SSR1500 is a 1 U xed conguraon appliance that's ideal for large data center or campus deployments. Powered

by the Juniper® Session Smart Router (SSR) soware, the SSR1500 provides secure and resilient WAN connecvity.

The SSR1500 has four 1 GbE ports, twelve 1/10/25 GbE SFP28 ports, a management port (for Mist operaons), 512

GB of memory, and a 1 TB enterprise-grade solid-state drive (SSD) for storage.

Install the SSR1500

IN THIS SECTION

What's in the Box? | 2

What Else Do I Need? | 2

Rack It | 3

What's in the Box?

Along with your SSR1500, you’ll nd:

• RJ-45 to USB A serial cable

• AC power cord (country-specic)

• Rack mount kit

• Two front mounng brackets

• Two side mounng rails

• Two rear mounng blades

• Six M4 i-head screws (for the front mounng brackets)

• Ten rack screws and cage nuts

• Eight M4 at-head screws

What Else Do I Need?

• Number 2 or 3 Phillips (+) screwdriver, depending on the size of your rack screws

• A management host such as a laptop or desktop PC

• A grounding cable

CAUTION: Ensure that a licensed electrician has aached the appropriate grounding lug to your

grounding cable. Using a grounding cable with an incorrectly aached lug can damage the SSR1500.

Rack It

Here’s how to install the SSR1500 in a four-post rack:

1. Review the General Safety Guidelines and Warnings.

2. Wrap and fasten one end of the electrostac discharge (ESD) cable grounding strap around your bare wrist, and

connect the other end to a site ESD point.

3. Aach the front mounng brackets to the front of the chassis using the six M4 at-head screws.

4. Secure the six M4 i-head screws to the sides of the chassis. Posion the side mounng rails such that the keyholes

of the side mounng rails align with the M4 i-head screws on the chassis. Slide and lock the side mounng rails in

place and use the two M4 at-head screws to secure the rails.

5. Grasp both sides of the SSR1500 chassis, li it, and posion it in the rack so that the front mounng bracket holes

align with the threaded holes in the rack rail.

NOTE: Ensure that the rear of the device is supported while you mount the SSR1500 in the rack.

6. While you’re holding the SSR1500 in place, have a second person insert and ghten the rack-mount screws to

secure the front mounng brackets to the rack rails. Tighten the screws in the two boom holes rst, then ghten

the screws in the two top holes.

7. Connue to support the SSR1500 in place and have the second person slide the rear mounng blades into the

channels of the side mounng rails.

8. Secure the rear mounng blades on each side of the chassis to the rack post using the rack mounng screws.

9. Check that the front mounng brackets on each side of the rack are lined up with each other.

10. Aach a grounding cable to earth ground and then aach the other end to the SSR1500 grounding point.

11. Dress the grounding cable. Ensure that it doesn’t touch or block access to other device components, and that it

doesn’t drape where people could trip over it.

Power On

Now that you’ve installed your SSR1500 in the rack and grounded the chassis, you’re ready to connect it to power.

The SSR1500 supports redundant AC power supplies that are pre-installed at the factory. It comes with two AC power

supplies preinstalled on the rear of the device.

1. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to one of

the ESD grounding points on the router.

2. Turn o the power switch on the SSR1500.

3. Make sure that the power supplies are fully inserted in the chassis.

4. Push the end of the power cord retainer strip into the hole under the power supply socket unl it snaps into place.

Ensure that the loop in the retainer strip faces the input on the PSU.

5. Press the small tab on the retainer strip to loosen the loop. Slide the loop unl there is enough space to insert the

power cord coupler through the loop into the power supply socket.

6. Insert the power cord coupler rmly into the power supply socket.

7. Slide the loop toward the power supply socket unl it is snug against the base of the coupler.

8. Press the tab on the loop and draw out the loop into a ght circle.

9. If the AC power source outlet has a power switch, turn it o.

10. Insert the power cord plug into an AC power source outlet.

WARNING: Ensure that the power cord does not block access to the appliance components or

drape where people can trip on it.

11. If the AC power source outlet has a power switch, turn it on.

12. Turn on the power switch on the SSR1500.

Step 2: Up and Running

IN THIS SECTION

Connect Your SSR1500 to the Mist Cloud | 6

Claim Your Appliance | 7

Add the Network | 9

Add Applicaons | 9

Create a Template | 10

Assign the Template to a Site | 14

Assign the SSR1500 to a Site | 14

Now that the SSR1500 is powered on, let's get it up and running on Juniper Mist™ cloud. You'll need Juniper Mist WAN

Assurance subscripon and login credenals for the Juniper Mist portal.

Connect Your SSR1500 to the Mist Cloud

Your SSR1500 uses port MGMT (mgmt-0/0/0) as the default port to contact Mist for zero-touch provisioning (ZTP). It

uses port 2/1 (xe-0/2/1) to connect to the LAN.

1. Connect the MGMT port to an Ethernet link that can assign a DHCP address to the SSR1500 and provide

connecvity to the Internet and Mist.

NOTE: For management, you can connect the SSR1300 to Mist using the MGMT port. You can also connect

to Mist from one of the WAN ports only when the MGMT port is disconnected, or does not have a valid

DHCP leased address and default route.

2. Connect port 2/1 to your LAN devices, such as

• Mist-managed Juniper EX switches

• Mist APs

• User devices

3. Power on the SSR1500.

Your SSR1500 is now connected to the Mist cloud.

Claim Your Appliance

IN THIS SECTION

Mist AI App QR Scan | 8

Enter the Mist Claim Code | 8

To add the SSR1500 to your organizaon's WAN Edge inventory, you'll need to enter the SSR1500 claim informaon

into Mist. The claim label (QR code scker) on the front panel has the claim informaon.

To enter the claim informaon, do one of the following:

• Scan the QR code with the Mist mobile applicaon.

• You can also manually enter the claim code in Mist. The claim code is the number above the QR code. For example:

In this picture, the claim code is FVDHMB5NGFEVY40.

Mist AI App QR Scan

You can download the Mist AI App from the Mac App Store or from Google Play Store.

1. Open the Mist AI app.

2. Click Claim Devices to Org.

3. Scan the QR code.

Enter the Mist Claim Code

1. Log in to your organizaon on the Juniper Mist cloud.

2. Select Organizaon > Inventory from the menu on the le, then select the WAN Edges tab at the top.

3. Click Claim WAN Edges in the upper right poron of the inventory screen.

4. Enter the SSR1500 claim code and click Add.

5. Uncheck the Assign claimed WAN Edges to site check box to place the SSR1500 in the inventory. The SSR1500 is

assigned to a site later.

6. Click the Claim buon to claim the SSR1500 into your inventory.

Video: Add the Claim Informaon in Mist

Add the Network

Add the network to be used for accessing applicaons over a LAN network segment.

1. Select Organizaon > Networks from the menu on the le.

2. Click Add Networks in the upper-right corner of the Networks page.

Video: Access the Add Networks Page

3. Enter a name for the network.

4. Enter the network subnet as 192.168.1.0/24.

5. Click Add.

This network is now dened for use across the enre organizaon, including the template that you'll apply to your

SSR1500.

Add Applicaons

1. Select Organizaon > Applicaons from the menu on the le.

2. Click Add Applicaons in the upper-right corner of the Applicaons page.

Video: Access the Add Applicaons Page

3. Enter the name for the applicaon as Internet.

4. Enter 0.0.0.0/0, or all IPv4 address spaces in the IP Addresses eld.

5. Click Add.

Your organizaon is now set up to provide access to the Internet.

Create a Template

Excellent! Now you have the SSR1500 waing to be claimed, a network for your LAN, and an Internet applicaon. Next,

you need to create a WAN Edge template that es them all together. Templates are reusable and keep the conguraon

consistent for every SSR1500 you deploy.

1. Select Organizaon > WAN Edge Templates from the menu on the le.

2. Click Create Template in the upper-right corner of the WAN Edge Templates page.

3. Enter a name for the template.

4. Click Create.

5. Enter the NTP and DNS informaon for the WAN edge device.

Video: Create the Template

Congure the WAN Port

The rst thing to do in your template is to dene which port to use for the WAN.

Altri manuali per SSR1500

Indice

Altri manuali Juniper Hardware di rete

Juniper

Juniper SRX300 Series Istruzioni per l'installazione

Juniper

Juniper DUAL-PORT T1-E1 GPIMS Manuale utente

Juniper

Juniper EX8208 Manuale utente

Juniper

Juniper NFX250-S1 Manuale utente

Juniper

Juniper Junos Space JA2500 Manuale utente

Juniper

Juniper NFX150 Istruzioni per l'installazione

Juniper

Juniper EX4100-F- 24P/T Manuale utente

Juniper

Juniper SSR130 Istruzioni per l'installazione

Juniper

Juniper JSA7500 Manuale utente

Juniper

Juniper Junos Space JA2500 Istruzioni per l'installazione

Juniper

Juniper NetScreen-IDP 3.0 Manuale utente

Juniper

Juniper G10 CMTS Istruzioni per l'installazione

Juniper

Juniper SRX300 Series Manuale utente

Juniper

Juniper JRR200 Istruzioni per l'installazione

Juniper

Juniper MX480 Istruzioni per l'installazione

Juniper

Juniper ACX7100-32C Manuale utente

Juniper

Juniper SSR1400 Manuale utente

Juniper

Juniper SSR1300 Manuale utente

Juniper

Juniper T1600 Manuale utente

Juniper

Juniper CTP2000 Series Guida rapida

Juniper

Juniper JSA5800 Istruzioni per l'installazione

Juniper

Juniper SSR1400 Manuale utente

Juniper

Juniper Junos OS Manuale utente

Juniper

Juniper MX104 Manuale utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente