JUNO JH084C1 Manuale utente

JH084C1

User Manual

Oven

Benutzerin‐

formation

Backofen

CONTENTS

Safety information 2

Safety instructions 4

Installation 7

Product description 8

Control panel 8

Before first use 9

Daily use 10

Clock functions 12

Using the accessories 13

Additional functions 14

Hints and tips 14

Care and cleaning 26

Troubleshooting 29

Energy efficiency 30

Subject to change without notice.

VISIT OUR WEBSITE TO:

Get usage advice, brochures, trouble shooter, service and repair

information:

www.juno.de/support

SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damage that are the result of

incorrect installation or usage. Always keep the instructions

in a safe and accessible location for future reference.

Children and vulnerable people safety

•This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

the use of the appliance in a safe way and understand the

hazards involved. Children of less than 8 years of age and

persons with very extensive and complex disabilities shall

be kept away from the appliance unless continuously

supervised.

•Do not let children play with the appliance.

•Keep all packaging away from children and dispose of it

appropriately.

•WARNING: Keep children and pets away from the

appliance when it operates or when it cools down.

Accessible parts become hot during use.

•If the appliance has a child safety device, it should be

activated.

•Children shall not carry out cleaning and user maintenance

of the appliance without supervision.

General Safety

•Only a qualified person must install this appliance and

replace the cable.

•The control panel must be connected to specified heating

unit with matching colours of connectors, to avoid possible

hazard.

•WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

•Always use oven gloves to remove or put in accessories or

ovenware.

•Before carrying out any maintenance, disconnect the

appliance from the power supply.

•WARNING: Ensure that the appliance is switched off

before replacing the lamp to avoid the possibility of electric

shock.

•Do not use the appliance before installing it in the built-in

structure.

•Do not use a steam cleaner to clean the appliance.

•Do not use harsh abrasive cleaners or sharp metal

scrapers to clean the glass door since they can scratch the

surface, which may result in shattering of the glass.

•If the mains power supply cable is damaged, it must be

replaced by the manufacturer, its Authorised Service

Centre or similarly qualified persons to avoid an electrical

hazard.

•To remove the shelf supports first pull the front of the shelf

support and then the rear end away from the side walls.

Install the shelf supports in the opposite sequence.

•The means for disconnection must be incorporated in the

fixed wiring in accordance with the wiring rules.

SAFETY INSTRUCTIONS

Installation

WARNING! Only a qualified

person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Do not pull the appliance by the handle.

• Install the appliance in a safe and

suitable place that meets installation

requirements.

• The kitchen cabinet and the recess

must have suitable dimensions.

• Keep the minimum distance from other

appliances and units.

• Before mounting the appliance, check if

the oven door opens without restraint. If

not the oven has to be lifted.

• Parts of the appliance carry current.

Close the appliance with furniture to

prevent touching the dangerous parts.

• The appliance is equipped with an

electric cooling system. It must be

operated with the electric power supply.

Cabinet minimum

height (Cabinet un‐

der the worktop mini‐

mum height)

590 (600) mm

Cabinet width 560 mm

Cabinet depth 550 (550) mm

Height of the front of

the appliance

594 mm

Height of the back of

the appliance

576 mm

Width of the front of

the appliance

595 mm

Width of the back of

the appliance

559 mm

Depth of the appli‐

ance

569 mm

Built in depth of the

appliance

548 mm

Depth with open

door

1022 mm

Ventilation opening

minimum size. Open‐

ing placed on the

bottom rear side

560x20 mm

Mounting screws 4x25 mm

Before you install the appliance, fit it with

the applicable hob from the table.

Type Maximum power

JKFN604F5 6000 W

JKFN606F5 7600 W

Electrical connection

WARNING! Risk of fire and

electric shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

mains plug and to the mains cable.

Should the mains cable need to be

replaced, this must be carried out by

our Authorised Service Centre.

• Do not let mains cables touch or come

near the appliance door or the niche

below the appliance, especially when it

operates or the door is hot.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have an

isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation device

must have a contact opening width of

minimum 3 mm.

• This appliance is supplied without a

main plug and a main cable.

• The hob connection socket is at the top

of the oven cabinet. The hob has

connection leads for the cooking zones

and the ground cable. The leads have

plug-in connectors. Plug the connectors

into the correct oven socket to connect

the hob to the oven. The design of the

plugs and sockets prevents incorrect

connections.

If the mains voltage is different, rearrange

the jumpers on the terminal board (refer to

the connection diagram below). Connect

the ground cable to the terminal. After you

connect the supply cable to the terminal

board, attach it with a junction clamp.

Connecting to terminal board

The appliance has a six-pole terminal

board. The jumpers (bridges) are set for op‐

eration on a 400 V three-phase with a neu‐

tral wire.

Connecting to terminal board

1 = 45 mm

2 = 45 mm

3 = 60 mm

4 = 60 mm

= 70 mm

123

L 1 – 2 – 3 = phase cables

N 4 = neutral cable

= earth cable

35 66 18 73 9

230V ~

1 2 3

5 4

2N ~

230V ~

1 2 3

5 4

3N ~

230V ~

1 2 3

5 4

Cable types applicable for installation or

replacement for Europe:

H07 RN-F, H05 RN-F, H05 RRF, H05 VV-

F, H05 V2V2-F (T90), H05 BB-F

For the section of the cable refer to the

total power on the rating plate. You can

also refer to the table:

Total power (W) Section of the ca‐

ble (mm²)

maximum 10380

3 phases: 5 x 2.5

2 phases: 4 x 4.0

1 phase: 3 x 6.0

Use

WARNING! Risk of injury,

burns and electric shock or

explosion.

• This appliance is for household use

only.

• Do not change the specification of this

appliance.

• Make sure that the ventilation openings

are not blocked.

• Do not let the appliance stay

unattended during operation.

• Deactivate the appliance after each

use.

• Be careful when you open the

appliance door while the appliance is in

operation. Hot air can release.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not apply pressure on the open

door.

• Do not use the appliance as a work

surface or as a storage surface.

• Open the appliance door carefully. The

use of ingredients with alcohol can

cause a mixture of alcohol and air.

• Do not let sparks or open flames to

come in contact with the appliance

when you open the door.

• Do not put flammable products or items

that are wet with flammable products

in, near or on the appliance.

WARNING! Risk of damage to

the appliance.

• To prevent damage or discoloration to

the enamel:

– do not put aluminium foil directly on

the bottom of cavity of the

appliance.

– do not put water directly into the hot

appliance.

– do not keep moist dishes and food

in the appliance after you finish the

cooking.

– be careful when you remove or

install the accessories.

• Discoloration of the enamel or stainless

steel has no effect on the performance

of the appliance.

• Use a deep pan for moist cakes. Fruit

juices cause stains that can be

permanent.

• This appliance is for cooking purposes

only. It must not be used for other

purposes, for example room heating.

• Always cook with the oven door closed.

Care and cleaning

WARNING! Risk of injury, fire,

or damage to the appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• Make sure the appliance is cold. There

is the risk that the glass panels can

break.

• Replace immediately the door glass

panels when they are damaged.

Contact the Authorised Service Centre.

• Be careful when you remove the door

from the appliance. The door is heavy!

• Clean regularly the appliance to

prevent the deterioration of the surface

material.

• Clean the appliance with a moist soft

cloth. Use only neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

• If you use an oven spray, follow the

safety instructions on its packaging.

Internal lighting

WARNING! Risk of electric

shock.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational status

of the appliance. They are not intended

to be used in other applications and are

not suitable for household room

illumination.

• Use only lamps with the same

specifications.

Service

• To repair the appliance contact the

Authorised Service Centre.

• Use original spare parts only.

Disposal

WARNING! Risk of injury or

suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable close

to the appliance and dispose of it.

• Remove the door catch to prevent

children or pets from becoming trapped

in the appliance.

INSTALLATION

WARNING! Refer to Safety

chapters.

Building in

594

589

114

21548

595+-1

min. 550

600

min. 560

520

198

523

Securing the oven to the cabinet

PRODUCT DESCRIPTION

General overview

13 10

531 4 76 22

1Control panel

2Knobs for the hob

3Power lamp / symbol

4Knob for the heating functions

5Display

6Control knob (for the temperature)

7Temperature indicator / symbol

8Heating element

9Lamp

10 Fan

11 Cavity embossment - Aqua cleaning

container

12 Shelf support, removable

13 Shelf positions

Accessories

•Wire shelf

For cookware, cake tins, roasts.

•Combi pan

For cakes and biscuits. To bake and

roast or as a pan to collect fat.

CONTROL PANEL

Knobs for the cooking zones

You can operate the hob with the knobs for the cooking zones.

You must read the Safety chapters in the hob user manual.

Heat settings

Knob indication Function

0 Off position

1 - 9 Heat settings

Double zone switch

1. Turn the knob to a necessary heat

setting.

2. To complete the cooking process, turn

the knob to the off position.

Using the double zone (if

applicable)

To activate the double zone,

turn the knob clockwise. Do not

turn it through the stop position.

1. Turn the knob clockwise to position 9.

2. Turn the knob slowly to the symbol

until you can hear a click. The two

cooking zones are on.

3. To set the necessary heat setting refer

to "Heat settings".

Retractable knobs

To use the appliance press the knob. The

knob comes out.

Sensor fields / Buttons

To set the time.

To set a clock function.

To set the time.

Display

A B

A. Clock functions

B. Timer

BEFORE FIRST USE

WARNING! Refer to Safety

chapters.

Before first use

The oven can emit an odour and smoke during preheating. Make sure that the room is

ventilated.

Step 1 Step 2 Step 3

Set the clock Clean the oven Preheat the empty oven

1. , - press to set the

time. After approximate‐

ly 5 sec., the flashing

stops and the display

shows the time.

1. Remove all accessories

and removable shelf

supports from the oven.

2. Clean the oven and the

accessories with a soft

cloth, warm water and a

mild detergent.

1. Set the maximum tem‐

perature for the function:

Time: 1 h.

2. Set the maximum tem‐

perature for the function:

Time: 15 min.

3. Set the maximum tem‐

perature for the function:

Time: 15 min.

Turn off the oven and wait until it is cold. Place the accessories and the removable shelf sup‐

ports in the oven.

DAILY USE

WARNING! Refer to Safety

chapters.

How to set: Heating function

Step 1 Turn the knob for the heating

functions to select a heating

function.

Step 2 Turn the control knob to select

the temperature.

Step 3 When the cooking ends, turn

the knobs to the off position to

turn off the oven.

Setting the function: True Fan Cooking PLUS

WARNING! Risk of burns and damage to the appliance.

Step 1 Make sure that the oven is cold.

Step 2 Fill the cavity embossment with

tap water.

The maximum capacity of

the cavity embossment is 250

ml. Do not refill the cavity em‐

bossment during cooking or

when the oven is hot.

Step 3 Set the function: .

Step 4 Turn the control knob for the temperature to set temperature.

Step 5 Preheat the empty oven for 10 min to create humidity.

Altri manuali per JH084C1

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Manuali Forno popolari di altre marche

Bosch

Bosch HVA531NS0 Manuale utente

Electrolux

Electrolux EOF6P46X Manuale utente

NEFF

NEFF B44S32 5GB Series Manuale utente

Combi

Combi BLODGETT BC142GDS Manuale utente

AEG

AEG COMPETENCE 311704300 Manuale utente

Falcon

Falcon DOMINATOR PLUS G3106 Series Guida utente

Rational

Rational SCC WE 61G Manuale utente

Smeg

Smeg DOSPA38X Manuale di installazione e funzionamento

Electrolux

Electrolux air-o-convect 20 GN 2/1 Manuale utente

Miele

Miele HR 1954-2 Manuale utente

KHIND

KHIND OT50 Manuale utente

Henny Penny

Henny Penny Smoker Box Manuale utente

Lang

Lang ECOD-AP Manuale utente

AEG

AEG BEK455310M Manuale utente

Frigidaire

Frigidaire FNGE90JGR Manuale utente

Hotpoint

Hotpoint FE9 S831 JSH IX Manuale utente

GE Advantium SCB2000 Manuale utente

AEG

AEG DE401301DM Manuale utente