Kapro MIXED PROLASER 875RG Manuale utente

MIXED PROLASER®

Model No. 875RG

User Manual

Manual del usuario

Manuel d'utilisation

Руководство по эксплуатации

Up to 50m /165’

red lines

Li-Polymer

battery pack

4 AA

batteries

(not included)

Up to 60m /200’

green line

Thank you for purchasing Kapro’s 875RG MIXED Prolaser®

You now own one of the most advanced laser tools available.

This manual will show you how to get the most out of your

laser tool.

Applications

The 875RG MIXED Prolaser®is a laser level with 1 horizontal

green line generator, 4 red vertical lines and one plumb dot.

The laser level is innovatively designed for a very broad

range of professional and DIY jobs, including:

• Hanging cabinets and shelves.

• Setting oor and wall tiles

• Drywall installation and hanging acoustic ceilings

• Framing and aligning windows and doors

• Leveling electrical outlets, plumbing and studs

• Accurately laying out right angles for ooring, fences, gates,

decks and pergolas.

• Leveling slopes for stairs, rails, roofs and more.

(manual mode)

NOTE

Keep this user manual for future reference.

Up to 50m /165’

red lines

Li-Polymer

battery pack

4 AA

batteries

(not included)

Up to 60m /200’

green line

CONTENTS

• Features 4

• Safety instructions 5-6

• Battery installation & Safety 7-8

• Overview 9-10

• Operating instructions 11-13

• Maintenance 14

• Field calibration test 15-25

• Speciﬁcations 26

• Warranty 27

• This laser tool automatically determines horizontal and vertical

plans.

• The laser projects separately or simultaneously 1 green

horizontal and 4 red orthogonal vertical beams, intersected

forward and on the ceiling as well as one plumb dot.

• Self-levels in automatic mode when the laser is positioned within

its self-leveling range of ±3°.

• Visual and audible warning will appear, when the laser is

positioned beyond its self-leveling range.

• Pulse mode emits pulses that can be detected by a detector,

increasing the product’s range up to 60m (200’) for 1 green

horizontal line and 50m (165’) for 4 red vertical lines.

• Manual mode allows angular layout/marking.

• The locking mechanism protects the pendulum during

transportation or when the laser is not in use.

• Rubberized shock resistant casing.

• 5/8" tripod adaptor.

• Height-adjustable support legs.

• 360° micro-adjustable rotation.

• Powered by Li – Polymer battery pack, or 4 AA alkaline batteries

• Includes: Li – Polymer battery pack, beam nder glasses, laser

targets, micro USB cable and carrying bag.

FEATURES

NOTE

This device contains precision components

that are sensitive to external shock. An impact

or fall may compromise its functionality.

Handle with care to maintain its accuracy.

SAFETY INSTRUCTIONS

WARNING

This product emits radiation that is classiﬁed

as class II according to EN 60825 -1

Laser radiation can cause serious eye injury

• Do not stare into the laser beam

• Do not position the laser beam so that it unintentionally

blinds you or others.

• Do not operate the laser level near children or let children

operate the laser level.

• Do not look into a laser beam using magnifying optical

devices such as binoculars or a telescope, as this will

increase the level of eye injury.

WARNING: This product contains lead in solder and

certain electrical components contain chemicals which

are known to the State of California to cause cancer,

birth defects or other reproductive harm.

(California Health & Safety Code Section 25249.6- Proposition 65)

NOTE

Beamfinder™ goggles are intended to

enhance the visibility of the laser beam.

They will not protect your eyes against laser

radiation.

• Do not remove or deface warning labels on the laser level.

• Do not disassemble the laser level, laser radiation can

cause serious eye injury.

• Do not drop the unit.

• Do not use solvents to clean the laser unit.

• Do not use in temperatures below -10°C or above 45°C

(14°F to 113°F)

• Do not operate the laser in explosive surroundings such

as ammable liquids, gases or dust. Sparks from tools

can cause ignition.

• When not in use remove the batteries, engage the

pendulum lock and place the laser in the carrying pouch.

• Make sure the pendulum lock mechanism is engaged

before transporting the laser.

NOTE

If the Pendulum lock mechanism is not

engaged before transportation, internal

mechanical damage may occur.

BATTERY INSTALLATION & SAFETY

This tool can be powered by either the designated Li-Polymer

battery pack or 4AA alkaline batteries.

Installation of the Li – Polymer Battery pack

1. Press down the latch and pull the battery cover.

2. Insert the Li – Polymer battery pack with the contact terminal

towards the 2 small pins in the battery compartment.

3. Reclose the battery cover.

4. Use a standard 5 V ± 5% charger (1A-2A), with micro USB

connector to charge the Li-Polymer battery pack.

5. Charge the battery pack for at least 2 hours before using it

for the rst time. The micro USB charging port is positioned

on the upper end of the battery. LED indicator on the battery

turns red while charging and green when fully charged.

6. In case of prolonged periods without use, recharge the

Li - Polymer battery every 3 months to maintain its capacity.

Installation of the 4 AA Batteries

1. Press down the latch of the cover and pull the battery cover.

2. Insert 4 new AA batteries of the same brand, according to

the polarity diagram on the inside of the battery compartment.

3. Reclose the battery cover.

NOTE

If the laser level is not in use for a long period

of time, remove the batteries from the battery

compartment. This will prevent batteries from

leaking and corrosion damage.

WARNING: Batteries can deteriorate, leak or explode,

and may cause injury or re.

1. Do not shorten the battery terminals.

2. Do not charge Alkaline batteries.

3. Do not mix old and new batteries.

4. Do not dispose of batteries into household waste.

5. Do not dispose batteries in re.

6. Defective or dead batteries must be disposed of, according

to local regulations.

7. Keep the batteries out of reach of children.

LED indicator on the

battery turns red while

charging and green

when fully charged.

OVERVIEW

Laser level

1. Horizontal laser output window

2. Vertical laser output window

3. Keypad

4. Surface level

5. Fine adjustment knob

6. Adjustable support legs

7. Battery cover

8. Battery compartment

9. Graduated scale

10. 5/8” Tripod threaded adaptor

11. Pendulum safety lock

LED indicator on the

battery turns red while

charging and green

when fully charged.

Keypad

1. Horizontal line button

2. Vertical lines button

3. Manual mode button

4. Pulse mode button

5. Manual mode red LED indicator

6. Pulse mode green LED indicator

Indice

Lingue:

Altri manuali Kapro Livello laser

Kapro

Kapro Prolaser 3D All-Lines Manuale utente

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Manuale utente

Kapro

Kapro 883G Manuale utente

Kapro

Kapro ROLASER 899 Manuale utente

Kapro

Kapro Prolaser 3D All-Lines Manuale utente

Kapro

Kapro Prolaser Plus Manuale utente

Kapro

Kapro Prolaser 894 Visi-Cross Manuale utente

Kapro

Kapro Prolaser 862 Manuale utente

Kapro

Kapro Prolaser 883 GREEN Manuale utente

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Manuale utente

Kapro

Kapro PROLASER 896G Manuale utente

Kapro

Kapro Prolaser 3D All-Lines 883 Manuale utente

Kapro

Kapro Prolaser Bambino GREEN Manuale utente

Kapro

Kapro Prolaser Plus Manuale utente

Kapro

Kapro Prolaser Plus 870 Manuale utente

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Manuale utente

Kapro

Kapro Prolaser 3D All-Lines Manuale utente

Kapro

Kapro Prolaser Vector 873 Manuale utente

Kapro

Kapro Prolaser 883 Manuale utente

Kapro

Kapro Prolaser Vector 873 Manuale utente

Kapro

Kapro Prolaser Vector 873 GREEN Manuale utente

Kapro

Kapro PROLASER ALL-LINES 875 GREEN Manuale utente

Kapro

Kapro Prolaser 3D All-Lines Manuale utente

Kapro

Kapro Prolaser Plus 870 Green Manuale utente

Manuali Livello laser popolari di altre marche

Nedo

Nedo ET-5 Manuale utente

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Manuale utente

LaserLiner

LaserLiner X2-Laser Manuale utente

Spectra

Spectra LL300N Manuale utente

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Manuale utente

Nedo

Nedo Crossliner 4 Manuale utente

Lasertec

Lasertec FX360G Manuale utente

Flex

Flex ALC 8 Manuale utente

Black & Decker

Black & Decker LZR5 Manuale utente

Johnson

Johnson 40-6692 Manuale utente

Cocraft

Cocraft HL 20-SG Manuale utente

Zircon

Zircon iLine Manuale utente

HWH

HWH 310 SERIES Manuale utente

Leica

Leica iCON robot 60 Manuale utente

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Manuale utente

LaserLiner

LaserLiner ActiveFinder XP Manuale utente

DeWalt

DeWalt DW082 Manuale utente

imex

imex EL20 Manuale utente