Ken A Vision Comprehensive Scope 2 Manuale utente

Megapixel Digital

Comprehensive Scope 2 (USB 2.0)

Instruction Manual

T-19541

T-19641

Thank you for purchasing Megapixel Digital Comprehensive Scope 2. This is

a high quality microscope comes with a built-in 1.3 megapixel (CMOS)

camera which will allow you to record single images, and time-lapse movies

and movies to your computer using the USB 2.0 connection. Utilizing your

computer's projection connection (usually a VGA connection) images can

simultaneously be projected onto a screen, LCD or Plasma Monitor or to a

DVR for presentation to a larger audience. Combined with Ken-A-Vision's

unique Applied Vision™ Software, you have purchased a powerful and

uniquely outstanding product for microscopy. The software will also allow

Network streaming, so that images may be easily shared.

Specifications

Ken-A-Vision Product # T-19541 T-19641

1.3 Megapixel CMOS Camera X X

Resolution - Full Screen Imaging 1280 x 1040 X X

USB 2.0 Connection X X

Applied Vision ™ Software X X

Head Type MONOCULAR BINOCULAR

10x Widefield Eyepiece(s) with pointer X X

Diopter on one Eye tub X X

Objectives (DIN) 4x, 10x, 40x, 100xR X X

Coarse/fine Focal Adjustment X X

Reverse Nosepiece - easy slide insertion,

manipulation

Abbé Condenser with Iris Diaphragm X X

Mechanical Stage (sub-stage) X-Y X X

Ken-A-Vision Cool Lighting Patented LED bright light X X

Dimmer (Rheostat) - easy adjustment transmitted light X X

Carrying handle X X

Cordless Microscope charger; storage compartment X X

Comprehensive 2 Microscope (Cordless) X X

Microscope Preparation

Carefully unpack your microscope from the packing carton.

Plug the unit it to charge the batteries of the microscope itself. The

Ken-A-Vision Comprehensive Scope 2 microscope base is a cordless unit, and

the batteries should immediately be charged to ensure longevity of use.

NOTE: It is the property of batteries to 'leak' charge over time. ALWAYS Store

Unit Charged after any use over six hours. Storage for a long period of time

of a discharged unit may result in the inability of the batteries being recharged

and then needing replacement. Care of batteries will give them a long life

span.

While charging the unit (or later):

• Make sure all eyepieces are in place.

• Carefully check that the objective lenses are firmly screwed into the

nosepiece. (DO NOT OVERTIGHTEN).

• Check the fine and coarse focus 'tension'. The knobs are oversized and

were designed for ergonomic ease of gripping. Both knobs should turn

easily to change focus.

• The stage should not drift or slip down on its own, at any time.

• Check the stage stop safety feature. The stage stop is a thumb screw with

a lock nut found just behind the stage. To check the stop, first place a

prepared slide in position for viewing. Move the coarse focus until the

object and stage are as close together as they can be. Look at the slide

and turn the 40x objective into place. This objective should be very close

to the slide, but not touching. If objective lens does not fit over the top of

a standard, cover slip covered slide, then stage stop is out of adjustment.

• Turn on microscope; be sure dimmer (rheostat) changes the amount of

light coming from the illuminator.

Microscope itself should now be ready for use.

Camera Preparation

Plug the narrower end of the USB 2.0 cord into the back of the camera body.

Plug the wider end of the USB 2.0 cord into the USB port of your computer.

Follow instructions for installing Applied Vision ™ Software onto your

computer. Once software is loaded, click on the Applied Vision Icon on your

desk top and you should see an image from the microscope camera. If no

picture first be sure you have turned on the light of the microscope and both

ends of the USB cord are attached. If either were not true, you may have to

're-boot' the Applied Vision ™ Software to activate the camera.

The camera receives its power from the USB connection, there is no power

cord. The camera draws NO power from the batteries or microscope charger.

5615 Raytown Road • Kansas City, MO 64133 U.S.A.

Tel.: 816-353-4787 • Fax: 816-358-5072

email:info@ken-a-vision.com • www.ken-a-vision.com

INS-SC12D

Therefore the environmental carbon 'footprint' of the camera itself is zero,

since its source of power is the computer. The computer does have an

environmental carbon 'footprint', but even this is very minimal, and the camera

is not increasing the computer 'footprint'.

Accessories

If you are interested in purchasing accessories or replacement parts for your

T-19541 or T-19641, visit the Ken-A-Vision Web site,

http://store.kenavision.com/catalog/ or contact your local Ken-A-Vision

Dealer.

Ken-A-Vision reserves the right to make design improvements and other changes in accordance with the

latest technology. There is no obligation to make changes in products already manufactured. Patents

PRODUCT SERVICE

TUV

geprufte

sicherhelt

Altri manuali per Comprehensive Scope 2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Ken A Vision Microscopio

Ken A Vision

Ken A Vision Research Scope T-29041 Manuale utente

Ken A Vision

Ken A Vision PrepScope T-1252C Manuale utente

Ken A Vision

Ken A Vision Comparison Scope T-1924C Manuale utente

Ken A Vision

Ken A Vision T-19541C Manuale utente

Ken A Vision

Ken A Vision Professor ESH101 Manuale utente

Ken A Vision

Ken A Vision Professor ESH101 Manuale utente

Ken A Vision

Ken A Vision VisionScope 2 Manuale utente

Ken A Vision

Ken A Vision T-3300 Manuale utente

Ken A Vision

Ken A Vision Comprehensive T-1901C Manuale utente

Ken A Vision

Ken A Vision Professor Stereo ESH200 Manuale utente

Ken A Vision

Ken A Vision T-1953BP Manuale utente

Ken A Vision

Ken A Vision VisionScope T-2400 Manuale utente

Ken A Vision

Ken A Vision PrepScope T-1201C Manuale del proprietario

Ken A Vision

Ken A Vision T-1922C Manuale utente

Ken A Vision

Ken A Vision Digital Comprehensive Scope 2 Manuale utente

Ken A Vision

Ken A Vision Professor ESH101 Manuale utente

Ken A Vision

Ken A Vision VisionScope 2 T-22001 Manuale utente

Ken A Vision

Ken A Vision Comprehensive Scope 2 Manuale utente

Ken A Vision

Ken A Vision CoreScope T-1701C Manuale utente

Ken A Vision

Ken A Vision PrepScope 2 T-12011C Manuale utente

Ken A Vision

Ken A Vision Dual Purpose Scope 2 T-19311C Manuale utente

Ken A Vision

Ken A Vision X2000 Manuale

Ken A Vision

Ken A Vision Vision T-2200C Series Manuale utente

Ken A Vision

Ken A Vision Comprehensive Scope 2 T-19011C Manuale utente

Manuali Microscopio popolari di altre marche

Thermo Scientific

Thermo Scientific Nicolet iN10 Guida

National

National DC3-163 Manuale utente

KERN Optics

KERN Optics OPE-1 Manuale utente

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuale utente

Prior

Prior Lux POL Manuale utente

Opitec

Opitec Smartscoop 115615 Manuale utente

KERN

KERN OPO-1 Manuale utente

Topcon

Topcon SP-1P Manuale utente

Motic

Motic PA43 Manuale utente

Leica

Leica DVM5000 Guida utente

MshOt

MshOt MZ62 Manuale utente

KERN Optics

KERN Optics OZR-5 Manuale utente

VWR

VWR VisiScope 384 Series Manuale utente

Nikon

Nikon ECLIPSE E200 POL Manuale utente

Leica

Leica DI C800 Manuale

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuale utente

Olympus

Olympus SZ61 Manuale utente