Kersten UBS Alpin Manuale utente

Original

Operating

Instruction

Hydrostatic Two Wheel Tractor

UBS Alpin

Bestellnummer: B00024 ab Masch.-Nr: R00 Stand: 01.12.2011

Manufactures by

Kersten Arealmaschinen GmbH

Empeler Straße 95

D - 46459 Rees

www.kersten-maschinen.de

Distributed in UK by

Kersten (UK) Ltd Tel. 0118 986 9253

Progrees House 39 Boulton Road

Reading, RG2 0NH

www.kerstenuk.com - [email protected]

LETTER..............................................................................................................................................3

ABOUT THIS INSTRUCTION MANUAL...........................................................................................4

2.1

BEFORE COMMISSIONING ............................................................................................................... 4

2.2

NOTES ABOUT THIS MANUAL .......................................................................................................... 4

SAFETY INSTRUCTIONS FOR HYDROSTATIC SINGLE TOWERS..............................................5

3.1

INTENDED USE .................................................................................................................................. 5

3.2

GENERAL SAFETY AND ACCIDENT PREVENTION RULES ............................................................ 5

3.3

USED PICTOGRAMS .......................................................................................................................... 9

3.4

WARNINGS AND SAFETY INSTRUCTIONS FOR FILLED LEAD - ACID BATTERIES ...................... 10

3.5

INSTRUCTIONS FOR USE FOR STARTER BATTERIES .................................................................. 11

DISPOSAL .........................................................................................................................................13

WARRANTY.......................................................................................................................................13

RECOMMENDATIONS......................................................................................................................14

6.1

SCHMIERSTOFFE .............................................................................................................................. 14

6.2

KRAFTSTOFFE ................................................................................................................................... 14

6.3

WARTUNG UND INSTANDSETZUNG ................................................................................................ 14

THE OPERATION OF THE SELF-OPERATING WORKSTATION..................................................15

7.1

START THE MOTOR ........................................................................................................................... 15

7.2

TROUBLESHOOTING AND SWITCHING ON THE SIDE DRIVE ....................................................... 15

7.3

STOPPING THE INTERNAL COMBUSTION ENGINE ........................................................................ 16

7.4

THE STEERING................................................................................................................................... 17

7.5

HEIGHT ADJUSTMENT OF THE HANDWOOD .................................................................................. 18

7.6

SIDE ADJUSTMENT OF THE HANDHOLM ........................................................................................ 18

ASSEMBLY........................................................................................................................................19

8.1

ASSEMBLY OF THE ATTACHMENT .................................................................................................. 19

8.2

ASSEMBLY OF HAND PROTECTION ................................................................................................ 20

8.3

MOUNTING OF THE GRID WHEELS ................................................................................................. 21

GENERAL INFORMATION ON LOADING AND TRANSPORT INFORMATION........................... 22

MAINTENANCE.................................................................................................................................23

10.1

GENERAL MAINTENANCE INSTRUCTIONS ..................................................................................... 23

10.2

DAILY MAINTENANCE ........................................................................................................................ 23

10.3

MAINTENANCE AFTER 20 HOURS OF OPERATION OR LONGER SERVICE LIFE ........................ 24

10.4

MAINTENANCE AFTER 100 HOURS OF OPERATION N .................................................................. 24

10.5

STORAGE ........................................................................................................................................... 24

10.6

CHECKING THE BELT TENSION VOLTAGE FROM THE SIDE DRIVE ............................................ 25

TECHNICAL SPECIFICATIONS .......................................................................................................26

WIRING PLAN - SAFETY DEVICE ...................................................................................................28

MALFUNCTION AND THEIR REMEDY............................................................................................28

EC DECLARATION OF CONFORMITY............................................................................................32

Table of Contents

Introduction

Dear Customer,

Thank you for choosing a quality product from Kersten.

This product has been manufactured according to the most up-to-date production methods and extensive

quality assurance measures, because only when you are satisfied with your device, our goal is reached.

Before using this machine or implement for the first time, please read this manual thoroughly and thoroughly.

If you do not understand any of the information contained in this safety data sheet or the product-specific

installation or operating instructions, please contact your sales representative or the machine manufacturer

directly.

Keep this manual handy. If necessary, you can read important information and instructions.

Have fun with your Kersten - device wishes you

Dipl.- Ing. (FH) Robert Bosch

Managing Director

About this manual

2.1

Before commissioning

Since self-propelled implements as well as implements result in significant accident or danger

sources if used improperly, the initial start-up is required

The Kersten implement is a briefing by specialized and authorized persons

absolutely necessary. The best way to familiarize yourself with its basic functions and its handling

is to choose a free and level terrain for your first trip.

•You reduce the risk of accidents on your part or third parties!

For further information and difficulties of any kind, please contact the dealer,

importer or directly to the manufacturer.

•Be sure to read the safety instructions on the following pages!

•Read the operating instructions before commissioning!

•Pass on all safety instructions to other users!

2.2

Notes on this operating manual

Enumerations are marked with eye-catching points.Beispiel:

•Text

Instructions are marked according to the order in which they are to be carried out.

Example:

Text

The machine or implement is subject to technical progress. All information, illustrations and technical data

are up-to-date at the time of publication. Changes in the sense of technical progress are reserved to the

manufacturer at any time.

Therefore, no claims can be derived from the information and illustrations in this booklet.

Safety instructions

Safety instructions for hydrostatic towed tractors

The most important safety instructions in this manual can not cover all possibilities. It goes without

saying that common sense and caution are factors that are not built into a machine, but must be

brought by the person who uses and maintains the machine.

In order to keep the accident risk as low as possible, please observe the following subchapters.

3.1

Intended use

•The towing vehicle as well as the devices approved by the manufacturer are suitable for the

respective usual or common use and work in the agriculture and forestry, as for example.

Green area and plant maintenance and built for winter service.

•Any other use is considered improper use. The manufacturer is not liable for damage resulting

from this, the risk being solely borne by the operator.

•Proper use also includes compliance with the operating, maintenance and service conditions

specified by the manufacturer.

•The towing vehicle may only be used, maintained and repaired by persons familiar with it and

aware of the dangers.

•The relevant accident prevention regulations as well as the other generally recognized safety

and occupational health rules must be observed.

•Unauthorized modifications to the machine lead to the exclusion of liability of the manufacturer

for the resulting damage.

3.2

General safety and accident prevention regulations

3.2.1

Basic rules

•In addition to the instructions in this operating manual, observe the general valid safety and accident

prevention regulations!

•The towing vehicle may not be operated by persons under the age of 16, not even under the

supervision of a

•Adults, be served! Children and adolescents should be instructed not to play with the device.

•Only trained personnel or persons may use this machine!

•When using public traffic routes, observe the relevant regulations!

•The tiller is not approved for public transport.

•The clothing of the user should be tight. Avoid loose-fitting clothing and wear sturdy

shoes or safety shoes!

•Only work in good visibility and light conditions!

•The attached warning and information signs provide important information for safe

operation; the attention serves your safety!

•For transport on motor vehicles or trailers outside the area to be machined, the motor

must be switched off!

•Be careful with rotating tools - safety distance!

•Be careful with trailing tools. Wait for work on these until they stop completely!

•There are crushing and shearing points on driven parts!

•The transport of persons and objects is prohibited!

•Driving behavior, steering and possibly braking capability as well as tilting behavior are

influenced by mounted or attached devices and load. For this reason, only implements approved

by the manufacturer may be used. The working speed must be adapted to the respective conditions.

•Do not make any changes to the engine's upper idle speed. Too high a speed increases

the risk of accidents.

•Unauthorized conversions that endanger the operational safety of the machine are prohibited!

•Check the machine for operational safety before each use!

Safety instructions

3.2.2

Work and danger area

•The user is responsible to third parties in the work area!

•Staying in the danger area of the machine is prohibited!

•Check the near range before starting up. Pay special attention to children and animals.

Ensure

sufficient visibility!

•Before starting work, remove foreign objects from the surface to be worked. Pay attention to other

foreign objects during work and eliminate them in good time.

•When working in enclosed areas, the safety distance to the border must be maintained so as not

to damage the tool.

•When working in the immediate vicinity of public roads and paths, these should not be approached

if possible, as there is a risk of injury to third parties due to flying objects.

•When working on public roads and squares or in the immediate vicinity, warning and danger signs

should be set up in order to attract the attention of third parties.

3.2.3

Before starting work

•Before starting work, please familiarize yourself with all the devices and actuators as well as their

function and make sure that all safety devices are properly installed and in the protective position!

It is too late during the work assignment!

•Above all, learn how to stop the engine quickly and safely in an emergency.

3.2.4

Starting the Maschine

•When starting the motor, all drives must be switched off!

•Do not run the engine indoors!

•Do not step in front of the single-axle tractor or the implement to start the engine.

•Do not use jumper fluids when using electric jump start (jumper cable).

There is a danger of explosion!

3.2.5

During operation

•Never leave the operating position on the guide rail while driving!

•Never adjust the operating handle while driving - risk of accident!

•The transport of persons and objects is prohibited!

•If, for example, the attachment has caught a foreign object and blocked it, stop the engine and clean

the attachment with a suitable tool! Always switch off the engine when handling or cleaning the

implement!

•Do not leave the operating station until all tools of the attachment have come to a standstill!

•In the event of damage to the self-propelled implement or attachment, stop the engine immediately and

have the damage repaired.

•If the steering fails, stop the self-propelled implement immediately and stop the engine.

Have the fault rectified immediately.

•If there is a risk of slipping on sloping ground, the implement carrier must be secured by an escort with

a pole or a rope.

The escort must be located above the vehicle at a sufficient distance from the work tools! For the

helper, it is recommended to wear crampons

Safety instructions

•If possible, always drive across (horizontally) to the slope!

•Only drive on rough and dry ground on steep slopes! Moisture and rain increase the risk of slipping

out and slipping.

•On steep slopes, lattice wheels or sprockets must be used to prevent the tractors from slipping

off.

•In emergency situations, if, for example, the machine slips sideways in the slope, always release

the handles! You as an operator do not manage with their physical strength to prevent the

Einachsschlepper on slipping and are otherwise carried away.

3.2.6

Leaving the machine

•When stopping the machine, close the fuel cock (if present)!

•By using wheel chocks or, if necessary, by applying the parking brake, secure the machine from rolling

away when leaving the vehicle.

•Secure the device against unauthorized use!

•Switch off the engine and, if present, remove the ignition key or the spark plug connector!

•Never leave the machine unattended while the engine is still in operation!

3.2.7

Screw connections and tires

•When working on the wheels, make sure that the device is safely parked and secured against rolling

away!

•Regularly check nuts and bolts for tightness and retighten if necessary.

•Repair work on the tires must only be carried out by qualified personnel and with suitable mounting

tools!

•If the tire pressure is too high there is a risk of explosion!

•Check the air pressure regularly!

3.2.8

Coupling and uncoupling attachments

•Attach and remove attachments only when the engine is off and the PTO is off.

•When replacing attachments and their parts, use suitable tools and

•Wear gloves.

•When mounting and dismounting, bring the required support equipment into the respective position

and ensure sufficient stability.

•Secure the rear-mounted tow tractor with an attachment to prevent it from rolling (parking brake, wheel

chocks).

•When attaching attachments, there is a risk of injury (crushing). Special care is necessary.

•Attach implements according to regulations and fix in the prescribed places.

3.2.9

Maintenance, cleaning and repair work

•Do not carry out maintenance and cleaning work on the running engine!

•When working on the engine, always remove the spark plug connector.

•If guards and working tools are subject to wear, they must be checked regularly and replaced if

necessary.

•Damaged cutting tools must be replaced.

•When replacing cutting tools, use suitable tools and wear protective gloves.

•Only use original spare parts from the manufacturer, as these comply with the technical requirements

and thus the risk of accidents is minimized

Safety instructions

•Cleaning with the high-pressure cleaner should be carried out so that the water jet is not held directly

in bearings, turned parts, grease nipples, shaft seals, wheel hubs, etc. After each cleaning with the

high-pressure device, the lubrication points must be re-greased. In the case of infringement, the right

to guarantee expires!

•Check the moving parts for ease of movement and regrease if necessary!

•After maintenance and cleaning work, be sure to replace the guards and put them in the protective

position!

•To avoid the risk of fire, keep the machine clean!

•Regularly check nuts and bolts for tightness and retighten if necessary.

•When carrying out maintenance, cleaning and repair work on the lifted device, always make sure that it

is protected by suitable support elements!

•Before carrying out any repairs, make sure that the hydraulic system is depressurised, because fluids

under pressure can penetrate the skin and cause serious injuries! Therefore

•See a doctor immediately - danger of infection!

•Repairs may only be carried out by qualified personnel.

•When working on the electrical system, always remove the earth strap from the battery!

•Check the hydraulic hose lines for damage and aging at regular intervals and replace if necessary.

•When welding the tractor or mounted equipment, disconnect the battery.

•Repairs such as welding, grinding, drilling, etc. must not be carried out on supporting and other safety-

related parts such as frames, axles, etc.!

3.2.10

Engine, fuel and oil

•Before refueling, switch off the engine and remove the ignition key (if available)!

•Do not top up with fuel and do not spill fuel (use a suitable refilling aid). If necessary, take up

spilled fuel immediately.

•Dispose of oils, fuels and filters separately and properly!

•When handling fuel, caution is required, increased risk of fire. Never refuel near open flames, hot

engine parts, and sparks when flying. Do not smoke when refueling!

3.2.11

Electrical system and battery

•When working on the electrical system, always disconnect the battery (negative pole) (if present).

•Make sure the connection is correct - first positive pole and then negative pole!

•Be careful with battery gases - Explosive!

•Avoid sparks and open flame near batteries.

•Take care when handling battery acid - corrosive!

•Always provide the positive pole with the intended cover or terminal protection cap.

•Caregivers of pacemakers must not touch the live parts of the ignition system while the engine is

running!

Safety instructions

3.3 Pictograms used

Explanation of the pictograms used:

Before commissioning read and observe the

operating instructions and safety instructions.

Switch off the engine and remove the spark plug

connector before carrying out any repair,

maintenance or cleaning work.

Never open or remove protective devices while the

engine is running!

Touch machine parts only when they have come to a

complete stop.

Danger from passing parts while the engine is running -

keep safety distance.

Follow the instructions in the technical

manual. Smudge!

Safety instructions

3.4 Warnings and safety instructions for filled lead - acid batteries

•Follow the instructions on the battery and in the operating instructions.

•Use eye protection.

•Keep children away from acid and battery.

Explosion hazard:

•When charging batteries, a highly explosive bang mixture is produced, so please

note the following:

•Fire, sparks, open light and smoking prohibited..

•Avoid sparking when handling cables and electronic devices, as well as through

electronic charging.

•Avoid short circuits

Burn Hazards:

•Battery acid is highly corrosive, therefore:

•Wear protective gloves and eye protection.

•Do not tip the battery, acid can escape from the degassing openings.

First aid:

•Acid splash in the eye; immediately rinse with clear water for several minutes. Then seek

medical attention immediately.

•Acid splashes on the skin or clothing; Immediately neutralize with an acid converter or soapy

water and rinse with plenty of clear water.

•In case of drunk acid, consult a doctor immediately.

Warnhinweise:

•Batterien nicht ungeschützt dem direkten Tageslicht aussetzen.

•Entladene Batterien können einfrieren, deshalb frostfrei einlagern.

Disposal:

•Hand over used batteries at a collection point.

•During transport, the following instructions for use must be observed.

•Never dispose of old batteries in the household waste.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kersten Trattore

Kersten

Kersten UBS Easy 9 G Manuale utente

Kersten

Kersten K2100 Manuale utente

Kersten

Kersten B00001 Manuale utente

Kersten

Kersten K1500 Manuale tecnico di riferimento

Kersten

Kersten B00005 Istruzioni per l'installazione

Kersten

Kersten K2100 Istruzioni per l'installazione

Kersten

Kersten B00002 Istruzioni per l'installazione

Manuali Trattore popolari di altre marche

Ariens

Ariens 936051 Manuale utente

MacDon

MacDon M150 Manuale utente

Belarus

Belarus 3522.5 Manuale utente

CARRARO

CARRARO Vigneto Manuale utente

Cub Cadet

Cub Cadet 3208 Manuale utente

GREMO

GREMO 1250F Manuale di istruzioni

HATTAT

HATTAT A90 Manuale utente

Kubota

Kubota WSM STV32 Manuale di istruzioni

Kubota

Kubota M108DC Manuale utente

Case

Case 385 Diesel Guida all'installazione

AL-KO

AL-KO Heritage RS 14/82 Manuale utente

Webb

Webb WE1742SD Manuale utente

MacDon

MacDon 9250 Manuale utente

Toro

Toro 03200 Reelmaster 3100-D Manuale utente

MASSEY FERGUSON

MASSEY FERGUSON 5400 Series Manuale utente

Kubota

Kubota T1880 Manuale utente

Case

Case JX 90 Manuale utente

Iseki

Iseki TXG23 Manuale utente