Keysight Technologies U3047AE04 Manuale

User’s and

Service Guide

Keysight Technologies

U3047AE04

Multiport Test Set Extension

Use this manual with the following documents:

PNA Series Network Analyzer On-line Help System

Notices

2011, 2012, 2016

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

U3047-90002

Edition

Edition 1, November 2016

Supersedes: September 2012

Printed in USA/Malaysia

Published by:

Keysight Technologies

1400 Fountaingrove Parkway

Santa Rosa, CA 95403

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

U.S. Government Rights

The Software is “commercial

computer software,” as defined

by Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202,

the U.S. government acquires

commercial computer software

under the same terms by which

the software is customarily

provided to the public.

Accordingly, Keysight provides

the Software to U.S. government

customers under its standard

commercial license, which is

embodied in its End User License

Agreement (EULA), a copy of

which can be found at

http://www.keysight.com/find/sweula

The license set forth in the EULA

represents the exclusive authority

by which the U.S. government

may use, modify, distribute, or

disclose the Software. The EULA

and the license set forth therein,

does not require or permit,

among other things, that

Keysight: (1) Furnish technical

information related to

commercial computer software

or commercial computer

software documentation that is

not customarily provided to the

public; or (2) Relinquish to, or

otherwise provide, the

government rights in excess of

these rights customarily provided

to the public to use, modify,

reproduce, release, perform,

display, or disclose commercial

computer software or

commercial computer software

documentation. No additional

government requirements

beyond those set forth in the

EULA shall apply, except to the

extent that those terms, rights, or

licenses are explicitly required

from all providers of commercial

computer software pursuant to

the FAR and the DFARS and are

set forth specifically in writing

elsewhere in the EULA. Keysight

shall be under no obligation to

update, revise or otherwise

modify the Software. With

respect to any technical data as

defined by FAR 2.101, pursuant

to FAR 12.211 and 27.404.2 and

DFARS 227.7102, the U.S.

government acquires no greater

than Limited Rights as defined in

FAR 27.401 or DFAR 227.7103-5

(c), as applicable in any technical

data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Definitions

•Specifications describe the performance of parameters covered by the product warranty

(temperature –0 to 50 °C, unless otherwise noted.)

•Typical describes additional product performance information that is not covered by the

product warranty. It is performance beyond specification that 80% of the units exhibit with a

95% confidence level over the temperature range 20 to 30 °C. Typical performance does not

include measurement uncertainty.

•Nominal values indicate expected performance or describe product performance that is

useful in the application of the product, but is not covered by the product warranty.

•Characteristic Performance describes performance parameter that the product is expected to

meet before it leaves the factory, but is not verified in the field and is not covered by the

product warranty. A characteristic includes the same guard bands as a specification.

Contents

Contents-1

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Network Analyzer Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Verifying the Shipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Available Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Test Set Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Rack Mounting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Interface Kit Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Maximum Power Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Reflection Tracking Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Front and Rear Panel Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Hardware Lock-Link Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Preparing the PNA-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

RF Interface Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

System Operational Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Equipment Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Check Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Controlling the Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Typeface Key Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Sweep Setup for Multiport and Standalone PNA Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

PNA-X Multiport Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Interface Control Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

GPIB Control Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Address and Data Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting the Test Port Paths with Address and Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Control Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Internal Voltage Supply Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

External Voltage Supply Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the Control Lines with Address and Data Values . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Cal Kit Operational Check. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Verification Limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Equipment Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Operational Check Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Verifying a Cal Kit Operational Check Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Replaceable Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Troubleshooting the Test Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Safety and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Safety Earth Ground. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Statement of Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Before Applying Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Contents-2

Contents

Electrostatic Discharge Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Instrument Markings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Keysight Support, Services, and Assistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Service and Support Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Contacting Keysight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Shipping Your Product to Keysight for Service or Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

User’s and Service Guide U3047-90002

User’s and Service Guide U3047-90002 1

U3047AE04

2User’s and Service Guide U3047-90002

U3047AE04 Introduction

Introduction

This document describes how to use and service the U3047AE04 Multiport Extension Test Set

with the Keysight N5247A 4-Port PNA-X for a 8-Port network analyzer solution.

Figure 1 Front Panel N5247A with U3047AE04

User’s and Service Guide U3047-90002 3

U3047AE04 Description

Description

The Keysight U3047AE04 is a Multiport Test Set extension designed for use with the

N5247A 4-Port PNA-X (10 MHz to 70 GHz) to provide a full 8-Port measurement solution.

The U3047AE04 has the following key features:

•4 Test Ports (1.85 mm male connectors)

•Solid-State switching

•10 MHz to 70 GHz frequency range of operation

•Keysight PNA compatibility with rear panel Test Set I/O interface for operational control. An

external personal computer is not required. The N5247A Option 400 and 551 are required.

•A standard Keysight System II instrument cabinet (4EIA high by 497.8 mm deep).

The N5247A PNA-X will be referred to throughout this document as the

PNA-X. The U3047AE04 will be referred to as the Test Set.

Network Analyzer Requirements

All network analyzers require Option 551 for multiport operation (N-Port error correction

and measurement capability). Table 1 below provides a listing of other network analyzer

option requirements. The analyzer's frequency range must be equal to or exceed that of the

test set so that the measurement system covers the full frequency range of the test set.

The test set files indicated in Table 1 must be installed into the analyzer's file directory:

c:\Program Files\Agilent\Network Analyzer\testsets

•Documentation - http://www.keysight.com/find/pna

•Network Analyzer Firmware - http://na.support.keysight.com/pna/firmware

•U3047AE04 Test Set Files - http://na.support.keysight.com/multiport (see test set files)

Table 1Network Analyzer Configuration Requirements

4-Port Network Analyzer Options

N5247A PNA-X or

N5227A PNA

400, 551

Test Set File System Figure

u3047ae04_pnax_p4.tsx Figure 1 on Page 2

Verifying the Shipment

To verify the contents shipped with your product, refer to the “Box Content List” included with

the shipment.

Inspect the shipping container. If the container or packing material is damaged, it should be

kept until the contents of the shipment have been checked mechanically and electrically. If there

is physical damage refer to “Contacting Keysight” on page 74. Keep the damaged shipping

materials (if any) for inspection by the carrier and an Keysight Technologies representative.

4User’s and Service Guide U3047-90002

U3047AE04 Available Options

Available Options

Test Set Option

Refer to “System Block Diagram” on page 52.

The U3047AE04 requires one of the following kits to interface the test set

with your network analyzer. The interface kit model option includes the

hardware lock-link and the cable kit listed in Table 2 below.

Rack Mounting Kits

Available options for system cabinet mounting:

•U3047AE04-1CM Rack Mount Kit without Handles (5063-9215)

•U3047AE04-1CN Front Handle Kit (5063-9228)

•U3047AE04-1CP Rack Mount Kit with Handles (5063-9222)

Network Analyzer Interface Kit Options

•Standard - mechanical switches for low loss.

Table 2 Interface Kit Options

16-Port Network

Analyzer System

Interface Kit Option

N5247A PNA-X or

N5227A PNA

U3021PX1 Opt 447

Hardware Lock-Link Cable Kit, Connector Type

U3021-60002 U3021-60101 , 1.85 mm M/M

1. "Hardware Lock-Link Installation (U3021-60002)" on page 12.

2. "RF Interface Cable Connections (U3021-60101)" on page 15.

Indice

Altri manuali Keysight Technologies Apparecchiature di prova

Keysight Technologies

Keysight Technologies Infiniium V Series Manuale utente

Keysight Technologies

Keysight Technologies 85058V Manuale

Keysight Technologies

Keysight Technologies U2802A Manuale utente

Keysight Technologies

Keysight Technologies InfiniiVision 3000G X Series Manuale utente

Keysight Technologies

Keysight Technologies U3047AM08 Manuale

Keysight Technologies

Keysight Technologies X Series Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies InfiniiVision 1000 X Series Manuale utente

Keysight Technologies

Keysight Technologies U3050BH11 Manuale

Keysight Technologies

Keysight Technologies E4982A Manuale utente

Keysight Technologies

Keysight Technologies InfiniiVision M9241A Manuale utente

Keysight Technologies

Keysight Technologies 16453A Manuale utente

Keysight Technologies

Keysight Technologies N5280A Manuale

Keysight Technologies

Keysight Technologies UXR Series Manuale utente

Keysight Technologies

Keysight Technologies N5224AU-401 Manuale di installazione e funzionamento

Keysight Technologies

Keysight Technologies U3020AS62 Manuale

Keysight Technologies

Keysight Technologies 1000A Series Manuale utente

Keysight Technologies

Keysight Technologies M8000 Series Manuale utente

Keysight Technologies

Keysight Technologies E7515B UXM 5G Manuale utente

Keysight Technologies

Keysight Technologies 85051B Manuale

Keysight Technologies

Keysight Technologies 8490D Manuale di servizio

Keysight Technologies

Keysight Technologies InfiniVision 6000L Series Manuale utente

Keysight Technologies

Keysight Technologies N4917CPCA Manuale utente

Keysight Technologies

Keysight Technologies Infiniium 9000 Series Manuale utente

Keysight Technologies

Keysight Technologies 11683AZ Option H01 Manuale di servizio

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente