Keysight 8516A Manuale di servizio

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Keysight 8516A S-Parameter

Test Set

Notice: Hewlett-Packard’s former Test and Measurement

business became part of Agilent Technologies in 1999, and

then Keysight Technologies in August 2014. This document is

provided as a courtesy but is no longer kept current and thus

will contain historical references to Agilent, HP or Hewlett-

Packard. For more information, go to www.keysight.com.

Operating and Service

Manual

Notices

No part of this manual may be reproduced in

any form or by any means (including elec-

tronic storage and retrieval or translation

into a foreign language) without prior agree-

ment and written consent from Agilent Tech-

nologies, Inc. as governed by United States

and international copyright laws.

Manual Part Number

08516-90069

Edition

October 2014

Published by:

Keysight Technologies, Inc.

1400 Fountaingrove Pkwy.

Santa Rosa, CA 95403 USA

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,” AND

IS SUBJECT TO BEING CHANGED,

WITHOUT NOTICE, IN FUTURE EDI-

TIONS. FURTHER, TO THE MAXIMUM

EXTENT PERMITTED BY APPLICABLE

LAW, KEYSIGHT DISCLAIMS ALL WAR-

RANTIES, EITHER EXPRESS OR IMPLIED,

WITH REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MER-

CHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. KEYSIGHT

SHALL NOT BE LIABLE FOR ERRORS OR

FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE

FURNISHING, USE, OR PERFORMANCE

OF THIS DOCUMENT OR OF ANY INFORMA-

TION CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A SEP-

ARATE WRITTEN AGREEMENT WITH

WARRANTY TERMS COVERING THE

MATERIAL IN THIS DOCUMENT THAT

CONFLICT WITH THESE TERMS, THE

WARRANTY TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software described in

this document are furnished under a license

and may be used or copied only in accor-

dance with the terms of such license.

Restricted Rights Legend

U.S. Government Restricted Rights. Software

and technical data rights granted to the fed-

eral government include only those rights

customarily provided to end user customers.

Keysight provides this customary commercial

license in Software and technical data pursuant to

FAR 12.211 (Technical Data) and

12.212 (Computer Software) and, for the

Department of Defense, DFARS 252.227-

7015 (Technical Data - Commercial Items)

and DFARS 227.7202-3 (Rights in Commer-

cial Computer Software or Computer Soft-

ware Documentation).

Safety Notices

CAUTION

A CAUTION notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or

adhered to, could result in damage

to the product or loss of important

data. Do not proceed beyond a

CAUTION notice until the indicated

conditions are fully understood and

met.

WARNING

A WARNING notice denotes a haz-

ard. It calls attention to an operat-

ing procedure, practice, or the like

that, if not correctly performed or

adhered to, could result in personal

injury or death. Do not proceed

beyond a WARNING notice until the

indicated conditions are fully

understood and met.

HP 8516A

S-Parameter Test Set

Operating and

Service Manual

HP part number:08516-90069

Printed in USA

12 March 1998



Revision 2

ii HP 8516A S-Parameter Test Set Manual

Notice

The information contained in this document is subject to change without

notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose. Hewlett-Packard shall not be liable for errors

contained herein or for incidental or consequential damages in connection

with the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information which is protected by

photocopied, reproduced, or translated to another language without prior

written consent of Hewlett-Packard Company.

Restricted Rights Legend

Use, duplication, or disclosure by the U.S. Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical

Data and Computer Software clause at DFARS 252.227-7013 for DOD

agencies, and subparagraphs (c)(1) and (c)(2) of the Commercial Computer

Software Restricted Rights clause at FAR 52.227-19 for other agencies.

Hewlett-Packard Company

Santa Rosa Systems Division

1400 Fountaingrove Parkway

Santa Rosa, CA 95403-1799, U.S.A.

HP 8516A S-Parameter Test Set Manual iii

What You’ll Find in This Manual…

Part 1 •Test set description and installation information

Part 2 •Principles of operation and specifications

Part 3 •Troubleshooting, replacement procedures, and replaceable parts

information

iv HP 8516A S-Parameter Test Set Manual

Warranty

Custom systems are warranted by contractual agreement between

Hewlett-Packard Company and the Customer.

Certification Hewlett-Packard Company certifies that this product met its published

specifications at the time of shipment from the factory. Hewlett-Packard

further certifies that its calibration measurements are traceable to the

United States National Institute of Standards and Technology (NIST,

formerly NBS), to the extent allowed by the Institute’s calibration facility,

and to the calibration facilities of other International Standards

Organization members.

Warranty This Hewlett-Packard system product is warranted against defects in

materials and workmanship for a period corresponding to the individual

warranty periods of its component products. Instruments are warranted for a

period of one year. During the warranty period, Hewlett-Packard Company

will, at its option, either repair or replace products that prove to be defective.

Warranty service for products installed by HP and certain other products

designated by HP will be performed at Buyer’s facility at no charge within

HP service travel areas. Outside HP service travel areas, warranty service

will be performed at Buyer’s facility only upon HP’s prior agreement and

Buyer shall pay HP’s round trip travel expenses. In all other areas, products

must be returned to a service facility designated by HP.

For products returned to HP for warranty service, Buyer shall prepay

shipping charges to HP and HP shall pay shipping charges to return the

product to Buyer. However, Buyer shall pay all shipping charges, duties, and

taxes for products returned to HP from another country.

HP warrants that its software and firmware designated by HP for use with an

instrument will execute its programming instructions when properly

installed on that instrument. HP does not warrant that the operation of the

instrument, or software, or firmware will be uninterrupted or error free.

LIMITATION OF WARRANTY. The foregoing warranty shall not apply

to defects resulting from improper or inadequate maintenance by Buyer,

Buyer-supplied software or interfacing, unauthorized modification or

misuse, operation outside of the environmental specifications for the

product, or improper site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. HP

SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OR

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

HP 8516A S-Parameter Test Set Manual v

EXCLUSIVE REMEDIES. THE REMEDIES PROVIDED HEREIN ARE

BUYER’S SOLE AND EXCLUSIVE REMEDIES. HP SHALL NOT BE

LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT,

TORT, OR ANY OTHER LEGAL THEORY.

Assistance Product maintenance agreements and other customer assistance agreements

are available for Hewlett-Packard products.

For assistance, call your local Hewlett-Packard Sales and Service Office

(refer to “Service and Support” on page vi).

vi HP 8516A S-Parameter Test Set Manual

Service and Support

Any adjustment, maintenance, or repair of this product must be performed

by qualified personnel. Contact your customer engineer through your local

HP Service Center. You can find a list of HP Service Centers on the web at

http://www.hp.com/go/tmdir.

If you do not have access to the Internet, one of these HP centers can direct

you to your nearest HP representative:

United States: Hewlett-Packard Company

Test and Measurement Call Center

PO Box 4026

Englewood, CO 80155-4026

(800) 452 4844 (toll-free in US)

Canada: Hewlett-Packard Canada Ltd.

5150 Spectrum Way

Mississauga, Ontario L4W 5G1

(905) 206 4725

Europe: Hewlett-Packard European Marketing Centre

Postbox 999

1180 AZ Amstelveen

The Netherlands

(31 20) 547 9900

Japan: Hewlett-Packard Ltd.

Measurement Assistance Center

9-1, Takakura-Cho, Hachioji-Shi

Tokyo 192, Japan

(81) 426 56 7832

(81) 426 56 7840 (FAX)

Latin America:Hewlett-Packard Latin American Region Headquarters

5200 Blue Lagoon Drive, 9th Floor

Miami, Florida 33126, U.S.A.

(305) 267 4245, (305) 267-4220

(305) 267 4288 (FAX)

Australia/New

Zealand:

Hewlett-Packard Australia Ltd.

31-41 Joseph Street

Blackburn, Victoria 3130

Australia

1 800 629 485 (Australia)

0800 738 378 (New Zealand)

(61 3) 9210 5489 (FAX)

Asia-Pacific: Hewlett-Packard Asia Pacific Ltd.

17-21/F Shell Tower, Times Square

1 Matheson Street, Causeway Bay

Hong Kong

(852) 2599 7777

(852) 2506 9285 (FAX)

HP 8516A S-Parameter Test Set Manual vii

Safety and Regulatory Information

Review this product and related documentation to familiarize yourself with

safety markings and instructions before you operate the instrument. This

product has been designed and tested in accordance with international

standards.

WARNING The WARNING notice denotes a hazard. It calls attention to a

procedure, practice, or the like, that, if not correctly performed

or adhered to, could result in personal injury. Do not proceed

beyond a WARNING notice until the indicated conditions are

fully understood and met.

CAUTION The CAUTION notice denotes a hazard. It calls attention to an operating

procedure, practice, or the like, which, if not correctly performed or adhered

to, could result in damage to the product or loss of important data. Do not

proceed beyond a CAUTION notice until the indicated conditions are fully

understood and met.

Instrument Markings

When you see this symbol on your instrument, you should refer to the

instrument’s instruction manual for important information.

This symbol indicates hazardous voltages.

The laser radiation symbol is marked on products that have a laser

output.

This symbol indicates that the instrument requires alternating current

(ac) input.

The CE mark is a registered trademark of the European Community. If

it is accompanied by a year, it indicates the year the design was

proven.

The CSA mark is a registered trademark of the Canadian Standards

Association.

Indice

Altri manuali Keysight Apparecchiature di prova

Keysight

Keysight 16442B Manuale utente

Keysight

Keysight U1610A Manuale utente

Keysight

Keysight 6 Series Manuale utente

Keysight

Keysight E6640A Manuale utente

Keysight

Keysight M8000 Series Manuale utente

Keysight

Keysight 11683A Manuale di servizio

Keysight

Keysight E6953A Manuale operativo

Keysight

Keysight 1000 Series Manuale utente

Keysight

Keysight 1000B Series Manuale utente

Keysight

Keysight 11636A Manuale di servizio

Keysight

Keysight N5990A-155 Manuale utente

Keysight

Keysight N2840A Manuale utente

Keysight

Keysight Infiniium S Series Manuale utente

Keysight

Keysight P9241 Manuale utente

Keysight

Keysight X8711A Manuale utente

Keysight

Keysight N4891A 400GBASE Manuale utente

Keysight

Keysight N7026A Manuale utente

Keysight

Keysight 8497K Manuale di servizio

Keysight

Keysight TS-5020 Manuale utente

Keysight

Keysight ixia UHD100T32 Manuale utente

Keysight

Keysight InfiniiVision 2000 X Series Manuale utente

Keysight

Keysight 85132E Scheda tecnica

Keysight

Keysight N1930 B Series Manuale utente

Keysight

Keysight InfiniiVision 4000G X Series Manuale utente

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Fluke

Fluke T5-600 Istruzioni per l'uso e l'installazione

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente