Kidde CTM City Tie Istruzioni per il montaggio

P/N 3101025-EN • REV 03 • ISS 16NOV15 1 / 2

CTM City Tie Module

Installation Sheet

Description

The CTM City Tie Module provides a single municipal box connection

for activating a local energy type master box connected to a public fire

alarm reporting system.

Installation

Install the CTM in accordance with NFPA 70 National Electrical Code.

WARNING: This device will not operate without electrical power. As

fires frequently cause power interruptions, we suggest you discuss

further safeguards with your fire protection specialist.

The CTM is shipped from the factory as an assembled unit; it contains

no user-serviceable parts and should not be disassembled.

For more information, refer to the technical reference manual listed

inside the control panel door.

To install the module:

1. Verify that all field wiring is free of opens, shorts, and ground

faults.

2. Make all wiring connections as shown in the wiring diagram. See

Figure 1.

3. Using the 4-24 × 1/2 in (13 mm) self-tapping screw provided,

mount the wall plate to the module.

4. Using the two 6-32 × 1/2 in (13 mm) machine screws provided,

mount the module to the electrical box.

Wiring

Wire the CTM to a dedicated notification appliance circuit (NAC) as in

Figure 1 on page 2. Do not install other notification appliances on the

same circuit.

Specifications

Voltage

24 VDC nom.

Current

Standby

Alarm

20 mA

300 mA, max.

Ground fault impedance

0 Ω

Wire size

12 to 18 AWG (0.75 to 2.5 sq mm)

Mounting

North American 2-1/2 in (64 mm) deep

1-gang box

Municipal box connection

Wire resistance:

Trip current:

26 Ω

200 mA into a 14.5 Ω coil

Operating environment

Temperature

Relative humidity

32 to 120°F (0 to 49°C)

0 to 93% noncondensing

Contact information

For contact information, see www.edwardsfiresafety.com.

firealarmresources.com

2 / 2 P/N 3101025-EN • REV 03 • ISS 16NOV15

Figure 1: CTM installation wiring diagram

[1] Power-limited and supervised for opens, shorts, and ground faults

[2] Nonpower-limited and supervised for opens and ground faults only.

26 Ω, max. 4.4 A, max.

[3] Use end-of-line resistor value required by the notification appliance

circuit

[4] NAC output signal must be compatible with the input rating of the

local energy type master box.

1234

– ActiveNormal

Public fire alarm

reporting system

Local energy type

master box

–

– +

–

EOLR [3]

ActiveNormal

From dedicated notification

appliance circuit [4]

Compatible electrical box

CTM

Wall plate

Screws

14.5 Ω

trip coil

[1]

[2]

firealarmresources.com

Altri manuali Kidde Unità di controllo

Kidde

Kidde GSA-CC1 Istruzioni per il montaggio

Kidde

Kidde GSA-REL Manuale del prodotto

Kidde

Kidde Alarmline II Manuale utente

Kidde

Kidde AEGIS 84-732001-001 Manuale utente

Kidde

Kidde AEGIS Manuale utente

Kidde

Kidde ARIES Manuale utente

Kidde

Kidde CO120X Manuale utente

Kidde

Kidde FX-IDCWS Istruzioni per il montaggio

Kidde

Kidde FX-2WIRE Istruzioni per il montaggio

Kidde

Kidde FX-IDC1A Istruzioni per il montaggio

Kidde

Kidde GSA-UM Istruzioni per il montaggio

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente