Kikusui PLZ-4W Series Manuale utente

Part No. IB020912

Sep. 2010

USERS MANUAL

ELECTRONIC LOAD PLZ-4W Series

PLZ 164W

PLZ 164WA

PLZ 334W

PLZ 664WA

PLZ1004W

Operation Manual

Setup Guide

The setup guide is intended for ﬁrst-time users of the PLZ-4W series. It gives an overview of the PLZ-

4W series, connecting procedures, safety precautions, etc. Please read through and understand this

guide before operating the product.

Quick Reference

The quick reference brieﬂy explains the panel description and the basic operation of the PLZ-4W.

User’s Manual (This manual)

User’s manual is intended for ﬁrst-time users of the PLZ-4W series. It gives an overview of the PLZ-

4W series and describes various settings, measurement procedures, maintenance, safety precautions,

etc.

Communication Interface Manual

The Communication Interface Manual explains the settings and commands for remotely controlling the

PLZ-4W series, using the communication interface and gives sample programs. The interface Manual

is provided on the accompanying CD-ROM.

The interface manual is written for readers with sufﬁcient basic knowledge of how to control instru-

ments using a personal computer.

Please read through and understand the Operation Manual before operating the product. After reading,

always keep the manuals nearby so that you may refer to it as needed. When moving the product to another

location, be sure to bring the manuals as well.

If you ﬁnd any incorrectly arranged or missing pages in the manual, they will be replaced. If the manual

gets lost or soiled, a new copy can be provided for a fee. In either case, please contact Kikusui distributor/

agent, and provide the “Kikusui Part No.” given on the cover.

The Operation Manual has been prepared with the utmost care; however, if you have any questions, or note

any errors or omissions, please contact Kikusui distributor/agent.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or

other countries.

Other company names and product names used in this manual are generally trademarks or registered trade-

marks of the respective companies.

Reproduction and reprinting of operation manual, whole or partially, without our permission is prohibited.

Both unit speciﬁcations and manual contents are subject to change without notice.

PLZ-4W Safety Symbols I

Indicates an imminently hazardous situation which, if ignored,

will result in death or serious injury.

Indicates that a high voltage (over 1000 V) is used here. Touch-

ing the part causes a possibly fatal electric shock. If physical

contact is required by your work, start work only after you make

sure that no voltage is output here.

Indicates a potentially hazardous situation which, if ignored,

could result in death or serious injury.

Indicates a potentially hazardous situation which, if ignored, may

result in damage to the product and other property.

Shows that the act indicated is prohibited.

Is placed before the sign “DANGER,” “WARNING,” or “CAU-

TION” to emphasize these. When this symbol is marked on the

product, see the relevant sections in this manual.

Indicates a protective conductor terminal.

Indicates a chassis (frame) terminal.

WARNING

CAUTION

DANGER

Safety Symbols

For the safe use and safe maintenance of this product, the following

symbols are used throughout this manual and on the product. Under-

stand the meanings of the symbols and observe the instructions they

indicate (the choice of symbols used depends on the products).

II Safety Precautions PLZ-4W

Safety Precautions

The following safety precautions must be observed to avoid ﬁre haz-

ard, electrical shock, accidents, and other failures. Keep them in mind

and make sure that all of them are observed properly.

Users

• This product must be used only by qualiﬁed personnel who understand the con-

tents of this operation manual.

• If it is handled by disqualiﬁed personnel, personal injury may result. Be sure to han-

dle it under supervision of qualiﬁed personnel (those who have electrical knowl-

edge.)

• This product is not designed or manufactured for general home or consumer use.

Purposes of use

• Do not use the product for purposes other than those described in the operation

manual.

Input power

• Use the product with the speciﬁed input power voltage.

• For applying power, use the power cord provided. Note that the provided power

cord is not use with some products that can switch among different input power

voltages or use 100 V and 200 V without switching between them. In such a case,

use an appropriate power cord.

Fuse

• With products with a fuse holder on the exterior surface, the fuse can be replaced

with a new one. When replacing a fuse, use the one which has appropriate shape,

ratings, and speciﬁcations.

Cover

• There are parts inside the product which may cause physical hazards. Do not

remove the external cover.

Operation

Manual

Line

Voltage

PLZ-4W Safety Precautions III

Installation

• When installing products be sure to observe 2.2, “Precautions Concerning Instal-

lation Location” described in this manual.

• To avoid electrical shock, connect the protective ground terminal to electrical

ground (safety ground).

• When connecting the power cord to a switchboard, be sure work is performed by

a qualiﬁed and licensed electrician or is conducted under the direction of such a

person.

• When installing products with casters, be sure to lock the casters.

Relocation

• Turn off the power switch and then disconnect all cables when relocating the

product.

• Use two or more persons when relocating the product which weights more than

20 kg. The weight of the products can be found on the rear panel of the product

and/or in this operation manual.

• Use extra precautions such as using more people when relocating into or out of

present locations including inclines or steps. Also handle carefully when relocat-

ing tall products as they can fall over easily.

• Be sure the operation manual be included when the product is relocated.

Operation

• Check that the AC input voltage setting and the fuse rating are satisﬁed and that

there is no abnormality on the surface of the power cord. Be sure to unplug the

power cord or stop applying power before checking.

• If any abnormality or failure is detected in the products, stop using it immediately.

Unplug the power cord or disconnect the power cord from the switchboard. Be

careful not to allow the product to be used before it is completely repaired.

• For output wiring or load cables, use connection cables with larger current capac-

ity.

• Do not disassemble or modify the product. If it must be modiﬁed, contact Kikusui

distributor/agent.

Maintenance and checking

• To avoid electrical shock, be absolutely sure to unplug the power cord or stop

applying power before performing maintenance or checking.

• Do not remove the cover when performing maintenance or checking.

• To maintain performance and safe operation of the product, it is recommended

that periodic maintenance, checking, cleaning, and calibration be performed.

Service

• Internal service is to be done by Kikusui service engineers. If the product must be

adjusted or repaired, contact Kikusui distributor/agent.

Check?

IV Contents PLZ-4W

Contents

Safety Symbols ____________________________________________ I

Safety Precautions ________________________________________ II

Chapter 1 General Information 1-1

1.1 About This Manual - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-2

1.2 Product Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-2

1.3 PLZ-4W Series Lineup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-3

1.4 Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-4

1.5 Overview of Controls - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-6

1.6 Options - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-8

Chapter 2 Installation and Preparation 2-1

2.1 Checking the Package Contents - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-2

2.2 Precautions Concerning Installation Location - - - - - - - - - - - - - - - - - - - - 2-3

2.3 Precautions When Moving the Unit - - - - - - - - - - - - - - - - - - - - - - - - - - 2-4

2.4 Connecting the Power Cord - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-5

2.5 Grounding (Earth) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-6

2.6 Turning on The Power - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-7

2.7 Checking the ROM Version - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-9

2.8 Load Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2-10

2.8.1 Precautions Concerning Wiring - - - - - - - - - - - - - - - - - - - - - - - 2-10

2.8.2 Connection to the Load Input Terminal on the Rear Panel - - - - - 2-14

2.8.3 Connection to the Load Input Terminal on the Front Panel - - - - 2-17

Chapter 3 For First Time Users 3-1

3.1 What Is an Electronic Load - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-2

3.2 Basic Flow of Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-3

3.3 Operating area of the PLZ-4W - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-6

3.4 Basic Operation Modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7

3.4.1 Operation of the CC Mode - - - - - - - - - - - - - - - - - - - - - - - - - - 3-7

3.4.2 Let's Use CC Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-9

Chapter 4 Names and Functions of Parts 4-1

4.1 Front Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-2

4.2 Rear Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-4

4.3 Operation Panel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-6

4.4 Display - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4-12

Chapter 5 Basic Operation 5-1

5.1 Panel Control Basics - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-2

5.2 Turning On or Off the Load - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-3

PLZ-4W Contents V

5.3 Types of Protection Functions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-6

5.4 Setting the Protection Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-8

5.5 Operation Modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-9

5.6 CC Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-10

5.7 CR Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-13

5.8 CV Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-16

5.9 CP Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-18

5.10 Soft start - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-20

5.11 Lock Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-22

5.12 Short Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-24

5.13 Menu Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-25

5.14 Initialization - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-28

5.15 Response Speed - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5-29

Chapter 6 Applied Operation 6-1

6.1 ABC preset memories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-2

6.1.1 Saving to ABC preset memories - - - - - - - - - - - - - - - - - - - - - - - 6-3

6.1.2 Recalling ABC preset memories - - - - - - - - - - - - - - - - - - - - - - - 6-3

6.2 Setup Memory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-6

6.2.1 Saving to the Setup Memory - - - - - - - - - - - - - - - - - - - - - - - - - - 6-7

6.2.2 Recalling the Setup Memory - - - - - - - - - - - - - - - - - - - - - - - - - - 6-8

6.3 Switching Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-10

6.4 Setting the Slew Rate - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-12

6.5 Using the Elapsed Time Display and the Auto Load Off Timer - - - - - - - 6-13

6.6 Sequence Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-14

6.6.1 Overview of the Normal Sequence - - - - - - - - - - - - - - - - - - - - 6-15

6.6.2 Sequence Editing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-18

6.6.3 Sequence Example (Normal Sequence) - - - - - - - - - - - - - - - - - 6-21

6.6.4 Overview of the Fast Sequence - - - - - - - - - - - - - - - - - - - - - - - 6-27

6.6.5 Fast Sequence Editing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-29

6.6.6 Sequence Example (Fast Sequence) - - - - - - - - - - - - - - - - - - - - 6-31

6.6.7 Executing, Pausing, Stopping the Sequence - - - - - - - - - - - - - - 6-36

6.7 Remote Sensing Function - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-38

6.8 External Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-39

6.8.1 Overview and Precaution of External Control - - - - - - - - - - - - - 6-39

6.8.2 J1/J2 connector - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-40

6.8.3 External Control of CC Mode - - - - - - - - - - - - - - - - - - - - - - - - 6-44

6.8.4 External Control of CR Mode - - - - - - - - - - - - - - - - - - - - - - - - 6-50

6.8.5 External Control of CP Mode - - - - - - - - - - - - - - - - - - - - - - - - 6-52

6.8.6 External Control of CV Mode - - - - - - - - - - - - - - - - - - - - - - - - 6-54

6.8.7 External Control of Load On and Load Off - - - - - - - - - - - - - - - 6-56

6.8.8 Trigger Signal Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-57

6.8.9 External Control of the Current Range - - - - - - - - - - - - - - - - - - 6-58

6.8.10 Alarm Signal Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-59

6.9 Monitor Signal Output - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-60

6.10 Parallel operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6-62

VI Contents PLZ-4W

6.10.1 Parallel Operation Using the Same Model - - - - - - - - - - - - - - - - 6-62

6.10.2 Parallel Operation Using Load Boosters - - - - - - - - - - - - - - - - - 6-65

6.10.3 Alarms during Parallel Operation - - - - - - - - - - - - - - - - - - - - - - 6-66

6.10.4 Response Speed during Parallel Operation - - - - - - - - - - - - - - - - 6-66

6.10.5 Slew Rate during Parallel Operation - - - - - - - - - - - - - - - - - - - - 6-66

6.10.6 Canceling the Parallel Operation - - - - - - - - - - - - - - - - - - - - - - 6-66

Chapter 7 Remote Control 7-1

7.1 Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-2

7.2 Interface Setup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

7.2.1 GPIB Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-3

7.2.2 RS232C Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-4

7.2.3 USB Control - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-6

7.3 Contents of the accompanying CD-ROM - - - - - - - - - - - - - - - - - - - - - - - 7-7

7.3.1 Installing the VISA Library - - - - - - - - - - - - - - - - - - - - - - - - - - 7-8

7.3.2 Installing the Software Application - - - - - - - - - - - - - - - - - - - - 7-10

7.4 Command Details - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7-10

Chapter 8 Maintenance and Calibration 8-1

8.1 Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2

8.1.1 Cleaning the Panels - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2

8.1.2 Cleaning the Dust Filter - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-2

8.1.3 Inspecting the Power Cord - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3

8.1.4 Internal Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-3

8.2 Confirming status of the fuse - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-4

8.3 Calibration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-5

8.3.1 Calibration Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-5

8.3.2 Preparation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-6

8.3.3 Calibration Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-7

8.4 Malfunctions and Causes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8-14

Chapter 9 Specifications 9-1

9.1 Electrical Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-2

9.2 General Specifications -------------------------------9-

9.3 Dimensions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9-9

Appendix A-1

A.1 Operating Area of the PLZ-4W - - - - - - - - - - - - - - - - - - - - - - - - - - - - -A-1

A.2 Basic Operation Modes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -A-2

A.2.1 Operation of the CC Mode - - - - - - - - - - - - - - - - - - - - - - - - - - A-2

A.2.2 Operation of the CR Mode - - - - - - - - - - - - - - - - - - - - - - - - - - -A-4

A.2.3 Operation of the CP Mode - - - - - - - - - - - - - - - - - - - - - - - - - - -A-6

A.2.4 Operation of the CV Mode - - - - - - - - - - - - - - - - - - - - - - - - - - -A-8

A.2.5 Operation of the CC+CV Mode - - - - - - - - - - - - - - - - - - - - - - -A-10

PLZ-4W Contents VII

A.2.6 Operation of the CR+CV Mode - - - - - - - - - - - - - - - - - - - - - - A-12

A.3 Operating Area of Each Model - - - - - - - - - - - - - - - - - - - - - - - - - - - - A-15

A.3.1 Operating Area of the PLZ164W - - - - - - - - - - - - - - - - - - - - - A-15

A.3.2 Operating Area of the PLZ334W - - - - - - - - - - - - - - - - - - - - - - A-16

A.3.3 Operating Area of the PLZ1004W - - - - - - - - - - - - - - - - - - - - - A-17

A.3.4 Operating Area of the PLZ164WA - - - - - - - - - - - - - - - - - - - - A-18

A.3.5 Operating Area of the PLZ664WA - - - - - - - - - - - - - - - - - - - - A-19

A.4 Sequence Program Creation Table - - - - - - - - - - - - - - - - - - - - - - - - - - A-20

Index I- 1

VIII Contents PLZ-4W

Altri manuali per PLZ-4W Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Kikusui Unità di controllo

Kikusui

Kikusui PLZ150U Manuale di installazione

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente