Kitsound CUBE Manuale utente

USER MANUAL

CUBE

WIRELESS

SPEAKER

JB. 5583-a / KSCUBBT / Made in China.

Christchurch, Dorset, BH23 4FL, UK

kitsound.co.uk

2 3

Please read this manual carefully

before use.

Box contents

• KS Cube Wireless speaker

• USB charge cable

• 3.5 mm audio cable

• User manual

Instructions for use

Charging the battery

The Cube has a built-in rechargeable

lithium battery. Make sure the Cube is

switched o. Connect one end of the

USB power cable to the charging port

on the Cube and connect the other

end to your PC or USB mains adaptor.

The battery will start charging.

[continued...]

4 5

[...continued] Charging the battery

• It takes up to 4 hours to fully charge the

battery

• Whilst charging, the LED will be solid red

• When fully charged, the LED will turn o

Pairing the speaker to your device

Before you can use the speaker wirelessly,

it will need to be paired to your device.

To do this:

1. Switch the power button to the ON

position, wait for 5 seconds and the

indicator LED will ash blue

2. Press and hold the Play/Pause button

for 2 seconds and the LED will quickly

ash blue

3. Turn your device’s Bluetooth ON and

search for new devices

[continued...]

6 7

4. When the speaker appears in the list,

select it and if asked for a pass code,

enter ‘0000’

5. The speaker will then be paired to your

device and the LED will slowly ash blue

To pair additional devices to the speaker,

rst make sure the wireless connectivity is

turned o on any devices that have already

been paired to the speaker. Then follow the

above instructions from step 1.

Note: ‘Bluetooth’ is a trademark of

Bluetooth SIG, Inc. This product is in

no way aliated with or endorsed by

Bluetooth SIG Inc.

8 9

Using the speaker

Wireless

• (Vol+) Press and hold the + button

• (Vol–) Press and hold the – button

• (Play/Pause) Press the Play/Pause button

• (Next track) Press the Next Track button

• (Previous track) Press the Previous

Track button

Note: All of the above functions can also

be controlled on the device being used –

though this may not work on all devices.

Aux mode

• Plug one end of the 3.5 mm cable into

the Cube’s line-in port

• Plug the other end of the 3.5 mm cable

into your device

• Switch the Cube on and the LED will be

solid blue

• On your connected device, play your

music/videos and the audio will play

through the Cube

[continued...]

10 11

Call handling

• This only works through the speaker when

connected with the 3.5 mm audio cable

• To answer or reject the incoming call,

touch the relevant button on your device

• Play/Pause, Next Track and Previous track

buttons do not operate during the call

• You can change the volume of the call

with the Cube or on your device

• To hang up the call, touch the relevant

button on your device

• Volume is controlled on both the device

playing the audio and the Cube

• Play/Pause, Next Track and Previous

track buttons do not operate on the

Cube in Aux mode

12 13

Line-out

If you have more than one Cube speaker

(or any other speaker with a line-in), you

can pair them together for bigger sound.

To do this:

• Connect your device to the Cube (follow

the ‘Using the speaker’ instructions)

• Connect a 3.5 mm cable from the

line-out port on the Cube speaker to

the line-in port on another speaker

If the second speaker also has a line-out

port, you can then connect a third speaker.

You can continue chaining speakers

together for as long as you like.

14 15

Care for your Cube

Please DON’T:

• Get the Cube wet

• Drop the Cube as this will invalidate

your warranty

• Open up the Cube – there are no user

serviceable parts inside

• Expose the Cube to extreme temperatures

or rapid changes of hot to cold or vice versa

Please DO:

• Clean the Cube with a soft dry cloth and

no detergents

Other information

Your device will have an internal amplier and

if it is playing digital les like MP3s, it will

also have an integrated DAC (Digital Audio

Converter). If you turn the volume up to 100%,

your device will be sending a distorted signal.

To avoid this and to get the best quality from

the speaker, we recommend you do not run

your device any higher than 95% volume.

Some devices output higher than others,

so you may need to reduce the volume if

you experience distortion.

16 17

We hope you’ve now got all the information

you need to get started, but if you’re having

problems with anything, please feel free to

Hereby, Kondor Ltd declares that the radio

equipment type, KSCUBBT Wireless Speaker, is in

compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is

available at the following internet address:

http://kondor.co.uk/product-documents.

Specications

Works with Bluetooth V2.1

Wireless connectivity

distance

up to 10 m

Play time up to 6 hours

Output RMS 3 W @ 4 ohm

S/N 80 dB

Frequency response 150 Hz – 18 kHz

Driver 45 mm

Battery Li-ion, 500 mAh

Aux-in 3.5 mm

We apologise for any inconvenience caused by minor

inconsistencies in these instructions, which may occur

as a result of product improvement and development.

Please do not attempt to open this product. There are

no user serviceable parts inside, in particular if your

product has an embedded, non-replaceable battery, do

not attempt to access or remove the battery as this may

cause personal injury and will damage the product.

Making any attempt to open the product or carry out

repair voids any and all warranties.

All trademarks are acknowledged as the property of

their respective owners. Unless otherwise stated their

use does not imply that the trademark owner is aliated

with KitSound or endorses the products herein.

Altri manuali per CUBE

Indice

Altri manuali Kitsound Altoparlanti

Kitsound

Kitsound Sonar Manuale utente

Kitsound

Kitsound BOOMBAR Manuale utente

Kitsound

Kitsound KS SLAM XL Manuale utente

Kitsound

Kitsound hive evolution Manuale utente

Kitsound

Kitsound DANCEFLOOR Manuale utente

Kitsound

Kitsound SLAM Manuale utente

Kitsound

Kitsound SLAM 2 Manuale utente

Kitsound

Kitsound Hive 2 Manuale utente

Kitsound

Kitsound GLOW Manuale utente

Kitsound

Kitsound SOUL Manuale utente

Kitsound

Kitsound BOOGIE BUDDY Manuale utente

Kitsound

Kitsound Mini Buddy Manuale utente

Kitsound

Kitsound BoomBar+ Manuale utente

Kitsound

Kitsound BOOMBAR 2 Manuale utente

Kitsound

Kitsound HIVE X Manuale utente

Kitsound

Kitsound REUNION Manuale utente

Kitsound

Kitsound HAWAII 1.0 Manuale utente

Kitsound

Kitsound Glow Stereo Manuale utente

Kitsound

Kitsound POCKETBOOM Manuale utente

Kitsound

Kitsound FLAIR Manuale utente

Kitsound

Kitsound MINI MOVER 20 Manuale utente

Kitsound

Kitsound RINSE Manuale utente

Kitsound

Kitsound VOICE ONE Manuale utente

Kitsound

Kitsound Chorus Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Electro-Voice

Electro-Voice EVID FM4.2 Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente