Konig SAT-USB01-KN Manuale utente
SAT-USB01-KN
MANUAL (p. 2 )
USB Sat Mini Box
ANLEITUNG (s. 12 )
USB Sat Mini Box
MODE D’EMPLOI (p. 22 )
Sat Box Mini USB GEBRUIKSAANWIJZING (p. 32 )
USB Sat Mini Box
MANUALE (p. 42 )
MINI SAT BOX CON PORTA USB MANUAL DE USO (p. 52 )
Caja mini USB Sat
HASZNÁLATI ÚTMUTATÓ (o. 62.)
USB Sat Mini Box KÄYTTÖOHJE (s. 72 )
USB Sat Mini vastaanotin
BRUKSANVISNING (s. 82 )
USB Sat Mini Box NÁVOD K POUŽITÍ (s. 92 )
USB Sat Mini Box
MANUAL DE UTILIZARE (p. 102 )
Mini box Sat USB ΕΓΧΕ∆ XPHH(. 112 )
USB ∆ουφο ου
BRUGERVEJLEDNING (p. 122 )
USB Sat Mini Box VEILEDNING (p. 132 )
USB Sat Mini Box
2
ENGLISH
USB Sat Mini Box
Chapter 1: Introduction
Definition
The SAT-USB01-KN is a USB version that is connected to the USB 2.0 port of a computer. It gives
unprecedented access to Internet services and any “Freeview” broadcast digital satellite television channel
(DVB-S). It can also be connected to any set top box to watch full screen satellite pay TV via our ‘capture
function’.
Chapter 2: Installation
Summary
The system requirements and the installation of the USB device are described in this chapter.
System requirements
• IBM compatible PC with P4 1700 MHz or above
• At least 256 MB RAM
• Sound blaster compatible audio card
• 3D graphic card recommended (with hardware overlay support, up to date drivers)
• Supported operating systems:
- Windows®XP Home/Professional (Service Pack 2 required)
- Windows®XP Professional X64 Edition
- Windows®Vista X86 and X64
- Windows®7 X86 and X64
• Additional requirements:
- DirectX®9 or above
- MediaPlayer®9 or above
- At least 10 GB or above hard disc space necessary for PVR functionality
Additional system requirements for USB devices
• 1 Available USB 2.0 port (do not use a USB 2.0 hub). If there are Slave and Master USB’s, it requires a
USB Master.
Recommended system requirements for HDTV reception
• SAT-USB01-KN
• IBM compatible PC with Intel®Pentium®4 or AMD Athlon™ XP CPU with 2400 MHz or above
• 3D AGP or PCI express graphic card recommended (with MPEG2 hardware acceleration, hardware
overlay support and up to date drivers)
• Recommended operating systems:
- Windows®XP Home/Professional (Service Pack 2 required)
- Windows®XP Professional X64 Edition
- Windows®Vista X86 and X64
- Windows®7 X86 and X64
Important information
For best results, a screen resolution of 800 x 600 pixels with 16 bit colour depth or above is recommended for
use with DVB applications. A screen resolution of at least 1280 x 1024 pixels with 24 bit colour depth or above
is recommended for HDTV.
All system drivers (main board, graphics, sound and network adapter drivers) should be updated to the
current version before installing the driver for the SatBox Mini USB device. The operating system should also
be updated with all available service packs and hot fixes.
3
Package contents
• Power supply (7.5 V/1 A) and USB cable
• Installation CD (contains User’s Guide) with driver and software
• Quick Install Guide
• Remote control
Installation
1. Connect SAT-USB01-KN to USB2.0 port.
2. Connect the power supply to the USB box.
Chapter 3: Installing the driver and software
Installing the driver
Start the computer. The first time after installing the SAT-USB01-KN or after plugging in the USB box, the
message “Found New Hardware” appears.
1. The “Found New Hardware Wizard” starts.
→Select the option “No, Not at This Time” within the dialog “Can Windows Connect to Windows Update to
Search for Software?”
→Click “Cancel” to continue
→Unplug the USB connector.
→Insert the driver CD and start installation of the driver, or just run “Drivers\setup.exe”.
→Microsoft Certification, click “Continue Anyway” until it is finished.
2. Connect the SAT-USB01-KN to the computer again.
→“Found New Hardware Wizard” will automatically find the driver location.
3. Now this message appears.
→Drivers for the “DVBS Video”contain no driver signature from Microsoft.
→Click “Continue Anyway” to complete the driver installation.
Installation of software packages
The installation of the data reception application, Server4PC, is a run through installation.
1. First the language menu appears.
→Choose language (e.g. English) and click “OK” to proceed.
2. Click “Next” to proceed.
3. Read the DVB License Agreement and click “Yes” to accept.
4. Use the default destination folder or choose a destination path by using the “Browse” button.
Press “Next” to proceed.
5. Press “Next” to proceed with the software installation and install the MPEGCAP software and MPEG4
plug.
6. When installation of ProgDVB is completed, restart computer to activate the changes. Save data and
close all applications first. Then click “Finish” to complete the setup and restart computer.
4
Chapter 4: Connection
How to connect to a satellite
For reception of DVB services in combination with most common satellite systems with frequency range
between 10.7 to 12.75 GHz.
Satellite reception is possible with:
• Single-LNB
• Twin-LNB
• Quad- LNB
• Quattro-LNB via switch
4.1 Connected directly to the LNB:
1. LNB Input
4.2 Connect a set top box (STB) and use one LNB by loop out to SAT-USB01-KN from STB’s LNB out,
or RF out.
Caution: STB MUST BE POWERED
OFF when Digistar is working
1. LNB Input
2. STB
3. INPUT
4. OUTPUT
4.3 Connect up to four LNB’s with a DiSEqC switch to receive multiple satellites with your SatBox Mini
USB.
1. LNB Input
→Support DiSEqC 1.0 (2.0 possible but no return path function)
→Up to 4 satellites with 4 frequency areas per satellite.
→Not for DiSEqC 1.2 / USALS (will damage the STA-USB01-KN and maybe the computer)
5
Chapter 5: ProgDVB Software Usage
1. Click the ProgDVB icon on the desktop.
2. Select DVB card type for ProgDVB: When use ProgDVB comes from SAT-USB01-KN product package go
directly to step 3.
Click on the “Settings”→“Device list” to choose the type of card installed to work with ProgDVB.
From this window, you can see what type of card is configured for ProgDVB to use:
3. DiSEqC and LNB settings:
Important thing to define is the DiSEqC switch parameter to connect 1 or more (more requires a DiSEqC
switch) satellites to DVB card. Enter the correct settings of LOF1, SWITCH, and LOF2.
→One LNB/antenna to DVB card, select NONE on the DiSEqC box.
→Multiple satellites or LNBs select DiSEqC 1.0 or 2.0.
→Click a green dot, select ADD LNB or highlight an already configured LNB, and click “Property” on the
right.
In the LNB settings window, select the correct values. Most satellites use the settings as in the following
picture:
6
For other satellites such as Nimiq and Echostar, the values are:
- Type: Ku or circular
- LOF1: 11250
- SWITCH: 12700
- LOF2: 0
For Dual band LNB:
- Type: Ku or circular
- LOF1: 10750
- SWITCH: 11700
- LOF2: 10600
- POWER: option when SAT-USB01-KN powers the LNB. Once done, you are ready to scan your selected
satellites.
4. Scanning satellites
Satellites transmit via many transponders. You can scan part of a satellite, or all of it.
7
Scan window for a satellite:
Scan Transponder
Remember: Manually scan each transponder to find all channels on a satellite.
5. Customizing display settings:
Select display options for the satellite channels listing by right clicking on the left side of the application.
Important: The IR handset can be used to change the channel up and down only after sorting the channel
lists.
8
From this window, choose how you want to display the different aspects of your satellite and its channels.
There are 4 types of feeds:
There are also data feeds that carry no audio or video.
6. Fine-tuning ProgDVB:
Audio and video settings:
Select how ProgDVB will output sound and video, DirectShow settings and time shifting values.
9
7. Viewing satellite reception:
- Regular display
- Full-screen
- Resizable
- Movable window.
The display mode is selectable by right-clicking with the mouse button.
Time shifting:
ProgDVB will continue to store the program on the hard drive for later viewing.
10
Setup screen Time shifting parameters:
8. Additional features:
Languages: Many language translations are available for ProgDVB.
Add-on features to ProgDVB:
- Display subtitles when available
- Others control antenna motors
- Analyze the DVB stream, etc.
Indice
Lingue:
Altri manuali Konig Decoder
