Korenix JetNet 6710G Manuale utente

JetNet 6710G / 6810G Series

Industrial 8-Port PoE plus 2 Gigabit-TX

Managed Etherenet Switch

Quick Installation Guide

www.korenix.com

V1.0

1. Overview

The JetNet 6710G/6810G series are Managed Industrial Power over Ethernet Switches,

equipped with eight 10/100 TX ports with 15.4 watts PoE injector and dual 10/100/1000 TX

ports for uplink connection.

By software conﬁguration or by LLDP auto detection, the eight 10/100 TX PoE injector ports

of JetNet 6710G series can deliver 15.4W by IEEE 802.3af or 30W by the latest High Power

PoE IEEE 802.3at standard for supporting High Power Requiring Devices (PD).

Besides, the eight IEEE 802.3af PoE injector ports of JetNet 6810G series are designed with

the Korenix patented Booster PoE technology, which allows the switches to adopt 24~57VDC

input and deliver 15.4W per port at 48V for applications where DC 48V power supply is not

available.

The 2 Gigabit Ethernet ports can provide high speed uplink connectivity to higher level

backbone switches with Korenix MSRTM network redundancy technology, which can recover

any failure in less than 5milliseconds. To work under vibration and shock environments, the

switches are designed with industrial D-coded M12 connectors or rugged RJ45 connectors to

ensure exceptional solid Ethernet and PoE connections.

1-1 Packing List Checking

The JetNet 6000G series is shipped with the following items. If any of these items is missing

or damaged, please contact your customer service representative for assistance.

JetNet 6710G Managed High Power

IEEE 802.3at PoE Switch (M12 / Rugged RJ)

JetNet 6810 Managed Booster PoE

Switch ( M12 / Rugged RJ)

M12 on DB9 Shielded Console Cable

Rugged M12 D-coded 4-pole

Field Assemble able Connecter

Rugged M12 A-coded 8-pole

Field Assemble able Connector

Rugged RJ45 Field Assemble

able Connecter

2 Wall-Mount kits & 8 Screws

Quick Installation Guide

Documentation and Software CD-ROM

JetNet

6710G-M12

JetNet

6710G-RJ

JetNet

6810G-M12

JetNet

6810G-M12

111 1

10 10

1-2 Introduction to the Manual

2. Appearances

The following manuals are included as PDF ﬁles on the CD-ROM:

4Quick Installation Guide: includes information on installing all versions of JetNet 6710G /

6810G series PoE Switch

4User manual – Conﬁguration: applied to the managed versions of JetNet 6710G/

6810G series PoE Switch

3. Hardware Installation

3-1 Powering of the system

The Power input port is located at the top of the front panel and supports redundant input

function via a proprietary assembly capable IP-67 connector (CDG-L207SA) included in the

shipment. If you cannot ﬁnd this power connector, please contact your local distributor. For

the available input power range and recommended cable size, please refer to the below

table.

Recommended

Maximum

Minimum

Redundant Input

V1, V2

V1, V2 bind together

AWG No. / Cable

Area (mm2)

AWG 14 / 2.0

JetNet 6710G-M12

JetNet 6710G-RJ

JetNet 6810G-M12

JetNet 6810G-RJ

Power Input (DC Voltage) Input Conductor Cable Size

Redundant

Power Input

Console

Port Alarm

Output

8x10/100 Base-TX PoE

M12 D-coding

2x1000 Base-T

M12 A-coding

LED: Power, PoE Status, Port Status,

Alarm, System Status, Ring Status

JetNet 6710G-M12 JetNet 6710G-RJ

Redundant

Power Input

Console

Port Alarm

Output

8x10/100 Base-TX PoE

M12 D-coding

2x1000 Base-T

M12 A-coding

LED: Power, PoE Status, Port Status,

Alarm, System Status, Ring Status

The JetNet 6810G only supports single power input that binds V1 and V2 together to obtain

higher current for the booster.

Use the UL listed Switching power supply to power the JetNet Switch. For the power wiring

method, please refer to the ﬁgures 3.1-1 and 3.1-2. For system safety and the anti-immunity

ability, the chassis ground screw should be well grounded to the earth ground.

Figure 3.1-1. Power Supply wiring architecture

Note:

E.G: Earth

Grounding

Figure 3.1-2 Power connector assembly diagram

The RS-232 console and the alarm relay are

connected via the assembly type of 5-pole M12

A-coding connector included in the supplied

package of JetNet switch. The following figure

3-2-1 is the disassembly diagram of M12

A-coding connector.

In the M12 connector packing, the parts 1, 2, 3

are already assembled.

Follow the steps for soldering and assembling

the cable and connector together: Figure 3.2-1 Field Assemble

M12 disassembly connector

3.2 RS-232 console and Relay Output Connection

Step -1: Slide component 4, 5, 6 and then 7 over the console

cable. Keep them loose. Do not tighten them yet. 2 cable glands

are provided for cable diameter from 3.5 to 5.8 mm. Choose the

one that best ﬁts the cable.

Step-2: Solder the conductors with the copper

wires according to the pin assignment. The

soldering side view of the pin is shown as below:

Console port pin assignment

Step-3: Fasten the components

4, 5, 6 and 7 in sequence. Be

sure the gasket is on the right

position. See the below M12

assembly diagram: 2. Insert part 6-seal into part 5.

4. Finalized

1. Assembly part 1 and 4,

ensure the solder pins are

protected by part 4-gasket,

then locking part 1 and 5.

3. Locking part 5 and 7.

Never install or work on/with the equipment or the

cabling during the period of its lightning activity.

3.3 Assembly of Ethernet Patch Cables

You can connect terminal devices and other segments via twisted pair cables. Ports which

are not assigned should be closed with the covering caps contained in the package list of

delivery to guarantee the connector is clear without rust.

3.3.1 Assembly of M12 Ethernet

Connector

For Fast Ethernet M12 D-Code to M12

D-Code connection, you can use either

version below:

M12-to-M12 Ethernet Cable Wiring

For Fast Ethernet M12 D-Code to RJ45

connection, the pin assignment of the patch

cable is shown below:

M12-to-RJ45 Ethernet Cable Wiring

For Gigabit Ethernet M12 A-Code to RJ45 connection, the pin assignment of the patch

cable is shown below:

Gigabit M12-to-RJ45 Ethernet Cable Wiring

M12-to-RJ45 Ethernet Cable Wiring

3.3.2. Assembly of Rugged RJ45 Connector

The RJ version provides robust connection by the

ﬁeld assembly capable rugged RJ45 connector.

Each component of the connector is shown below:

3.3.2-1 Rugged RJ45 Connecter Components

Follow the steps to assemble the rugged RJ45 connector:

M12-to-RJ45 Ethernet Cable Wiring

RJ45 Cable color code

Following picture-19 shows the color code of Cat.-5E UTP/STP cable based on the two

standards released by TIA/EIA – 568A and 568B. The 568B wiring is by far, the most

common wiring method. You can choose the method that suits your application; but

ensure that both ends of the cable use the same standard.

4. Device Management

4.1 Preparation for console management

Attach the RS-232 DB9 connector to your PC’s COM port. Connect the M12 A-code 5-pin

connector to the console port of the JetNet 6710G/6810G.

JetNet 6710G / 6810G series switches provide both in-band and out-band configuration

methods. You can conﬁgure the switch via the RS232 console with the attached console

cable, or you can remotely manage the switch via network using Telnet/SSH, Web/HTTPS

management.

3.4 Wall /Panel Mounting Installation

The JetNet 6710G/6810G series are shipped with 1 set mounting bracket which allows users

to install JetNet 6710G/6810G on the panel or wall. Assemble the brackets on the rear side

of JetNet 6710G/6810G body, then using a suitable screw install onto wall / panel of cabinet

with good heat dissipation.

4.1.1 Go to Start -> Program -> Accessories -> Communication -> Hyper Terminal

4.1.2 Give a name to the new console connection to create a new serial communication

session.

4.1.3 Choose the COM name, and select the correct serial settings. The serial settings of

JetNet 6710G/6810G are as below:

Baud Rate: 9600 / Parity check: None / Data Bit: 8 / Stop Bit: 1

4.2 Preparation for Web management

Before you attempt to use the embedded web interface to manage switch operation, verify

that your JetNet switch is properly installed on your network and that every PC on this

network can access the switch via the web browser.

4.2.1 Launch the web browser (Internet Explorer or Mozilla Firefox) on the PC.

4.2.2 Type http:// 6710G_IP_Address or 6810G_IP_Address (The default IP address is

192.168.10.1.), then press Enter.

4.2.3 The login screen will appear next. Type-in the user name and the password. The

default user name and password is admin/admin.

4.2.4 Click OK, and then the welcome page of the web-based management interface will

appear.

At the left column of the Web management interface are listed the available software

features; by pressing the ring column you can also view the detailed conﬁguration

interface.

For more detailed management features please refer to the software’s users’ manual. The

software user manual can be downloaded from Korenix Website as below:

http://www.korenix.com/downloads.htm

4.1.4 After connected, you can see Switch login request. Type-in the username and

password to login. The default username is “admin”, password is “admin” for console

interface.

4.1.5 Follow the manual to conﬁgure the device features.

Ѯᢊடց

ี݂಑ I 321415!ဴ

ี݂಑ I 313547 ဴ

ཱི࠮಑ M 339841 ဴ

ཱི࠮಑ M 339840 ဴ

Patent No. (Taiwan):

Granted Invention: I 321415

Granted Invention: I 313547

Utility Model: M339840

Utility Model: M339841

Altri manuali per JetNet 6710G

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Korenix Interruttore

Korenix

Korenix JetNet 3705 Series Manuale utente

Korenix

Korenix JetNet 3705-24V Manuale utente

Korenix

Korenix JetNet 4508 Manuale utente

Korenix

Korenix JetNet 3018G Series Manuale utente

Korenix

Korenix JetNet 3810G(f) Manuale utente

Korenix

Korenix JetNet 7020G Manuale utente

Korenix

Korenix JetNet 6524G Manuale utente

Korenix

Korenix JetNet 2205 Series Manuale utente

Korenix

Korenix JetNet3008G V2 Manuale utente

Korenix

Korenix JetNet 5210G Manuale utente

Korenix

Korenix JetNet 5428G-20SFP Series Manuale utente

Korenix

Korenix JetNet 5628G Series Manuale utente

Korenix

Korenix JetNet 5728G series Manuale utente

Korenix

Korenix JetNet 6710G-HVDC Series Manuale utente

Korenix

Korenix JetNet 7628X Series Manuale utente

Korenix

Korenix JetRock Series Manuale utente

Korenix

Korenix JetNet 3005 Manuale utente

Korenix

Korenix JetNet 7310G Series Manuale utente

Korenix

Korenix JetNet 6710G Manuale utente

Korenix

Korenix JetNet 2005f Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

Korenix

Korenix JetNet 3810G Series Manuale utente

Korenix

Korenix JetNet 6524G Manuale utente

Korenix

Korenix JetNet 3808G-M12 Series Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente