Kramer WP-20 Manuale utente
KRAMER
WP-20 Wall Plate Quick Start Guide
This guide helps you install and use your product for the first time. For more detailed information, g
http://www.kramerav.com/manual/WP-20 to download the latest manual or scan the QR code on the left.
o to
Step 1: Check what’s in the box
1 Quick start guide
The WP-20 Wall Plate
Power Adapter (12v DC)
Step 2: Connect outputs
Always switch off the power to each device before connecting it to your .
For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to the WP-20.
WP-20
P/N: Rev:
WP-20 Quick Start (P/N: 2900-300508QS REV 1)
2 9 0 0 - 3 0 0 5 0 8 QS
1
TP-588D/
TP-580RXR
Serial
Controller
Audio
Amplifier
Remote
Switches
Note: When the receiver in use does not support Ethernet, you can replace the left hand side faceplate with an optional part
(WP-20-BLNK(W) P/N 68-80305099 or WP-20-BLNK(B) P/N 68-80305199) that does not have a cutout for the RJ-45 Ethernet
connector.
Step 4: Connect the power
Step 5: Install the WP-20
Step 3: Set the DIP-switches
WWW.KRAMERAV.COM
Connect power adapter to the WP-20, (if the device is not supplied power via the HDBT PoE),
and plug the adapter into the mains power.
Mount the device in a suitable wall box.
We recommend that you open all holes in the walls of the box to assist in cooling the WP-20.
Step 6: Connect the inputs
Ethernet
LAN/PC
Blu-ray
Disk
Player
PC Graphics
Source
Multimedia
Player
#
Feature
Function
DIP-switch
1 Manual/Auto
Switching
Selects either manual or
auto input switching
On—Manual switching
Off—Auto switching
2 Priority/Last
Connected
Switching
Selects either priority or
last connected input
switching, (DIP-switch 1
must be off)
On—Priority switching
Off—Last connected switching
Default video input priority is HDMI 1 >
HDMI 2 > PC
3 Manual/Auto
Audio Switching
Selects either manual or
auto audio input selection
On—Manual switching
Off—Auto switching
4 Analog/HDMI
Audio Priority
Switching
Selects either the analog
or the HDMI audio input
as priority
On DIP-switch 3 On: Analog audio
input
DIP-switch 3 Off: External >
Embedded priority
Off DIP-switch 3 On:
HDMI audio input
DIP-switch 3 Off: Embedded >
External priority
DIP-switch 2
Status
DIP-switch 1 Auto Switching
(Off)
DIP-switch 1 Manual Switching
(On)
Off—Last
Connected
When two sources are connected
the last one connected gets priority
Manual video input selection
On—Priority When two sources are connected
the active source is selected
according to the pre-defined priority
Manual video input selection
Altri manuali per WP-20
3
Altri manuali Kramer Unità di controllo
Kramer
Kramer RC-7RL Manuale utente
Kramer
Kramer RTBUS-25xl Manuale utente
Kramer
Kramer VM-8UX Manuale utente
Kramer
Kramer OSP SFP+ Scheda tecnica
Kramer
Kramer TBUS-202xl Manuale utente
Kramer
Kramer TBUS-201xl Manuale utente
Kramer
Kramer TBUS-203xl Manuale utente
Kramer
Kramer RC-52A Manuale utente
Kramer
Kramer TBUS-5i Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
