Kyocera FS-1100 Manuale utente

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

KYOCERA®FS-1100

EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS

KYOCERA FS-1100 TONER CARTRIDGE

1. Drill a 1/2” to 3/4” hole into the fill plug. The OEM plugs are

welded in so the hole is necessary. Clean out all the remaining

toner.

KYOCERA FS-1100 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

The Kyocera FS-1100 cartridges are rated for 4,000 pages. The OEM part number is TK-142.

There is a chip used on this cartridge that must be replaced each cycle.

The chips are regional, so make sure you have the correct one!

REMANUFACTURING THE

KYOCERA FS-1100 TONER CARTRIDGE

By Mike Josiah and the Technical Staff at UniNet

2. Make sure the toner port is closed.

Fill the cartridge with toner for use in the TK-142 series of cartridges.

Use a Samsung CLP-300 seal to cover the hole you drilled.

3. If shipping the cartridge, place a small strip of tape across

the toner port.

KYOCERA FS-1100 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

4. Peel off the old chip label (it is an RF type chip).

Install the new chip label.

KYOCERA FS-1100 EASY TO REMANUFACTURE CARTRIDGE INSTRUCTIONS

UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]

www.uninetimaging.com

Altri manuali per FS-1100

Indice

Altri manuali Kyocera Accessori per stampanti