Kyocera KM-7530 Manuale utente
Operation Guide <Functions Edition>
Click on the button to jump to the desired section.
Sending Scanned Image Data to Your Computer
Using TWAIN Capabilities
Sending Scanned Image Data by Email
Using the Scanner Function
Adding File Information to Scanned Image Data
i
Sending Scanned Image Data to Your Computer (Scan to PC)
Create a destination folder in your computer and you can have scanned image data sent directly to that
folder. The flowchart below shows a simple illustration of the steps required up to transmission of the data to
the computer.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Making basic settings
Creating destination folders
Sending scanned image data
Use the scanner to designate a destination and
have scanned image data sent directly to that
location.
See page
3-26
Settings and registra-
tion using Address
Editor
See page
3-67
Settings and registra-
tion using Address
Book
See page
2-1
Settings and registra-
tion using an Internet
Web browser
In order to use the Scan to PC function it is necessary to utilize the included utilities and make network
settings and register such information as the sender and destination addresses.
See page
3-4
Scanner File Utility
* Network settings as well
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.
ii
Sending Scanned Image Data by Email (Send E-mail)
Have scanned image data sent directly by email to a registered email address. The flowchart below shows a
simple illustration of the steps required up to transmission of the email message.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Making basic settings
Sending scanned image data
Use the scanner to designate a destination and
have scanned image data sent directly to that
location.
See page
3-26
Settings and registra-
tion using Address
Editor
See page
3-67
Settings and registra-
tion using Address
Book
See page
2-1
Settings and registra-
tion using an Internet
Web browser
In order to use the Send E-mail function it is necessary to utilize the included utilities and make network
settings and register such information as the sender and destination addresses.
* Network settings as well
as the sender and
destination address
registration procedures
can be accomplished at
the scanner itself. For
information on these
procedures, refer to the
<Setup Edition> of this
Operation Guide.
iii
Use scanner image data in TWAIN-compatible applications. The flowchart below shows a simple illustration
of the steps required up to scanning of the data using the TWAIN source.
For a more detailed explanation of each step, refer to the indicated reference page.
Click on the reference page will take you directly to that page.
Using TWAIN Capabilities (TWAIN)
Making basic settings
In order to use the TWAIN source it is necessary
to make certain scanner-related settings.
Starting the scanning operation
Use the TWAIN source to initiate the scanning
operation.
See page
3-99
Settings related to
the TWAIN source
See page
3-104
Scanning with
the TWAIN source
iv
Adding File Information to Scanned Image Data
You can make settings related to the addition of file information (keywords) which helps you search your
computer for specific scanned images, or have that information saved as a csv file along with the scanned
image data. By including such file information along with your scanned image data, it will be an easy task to
locate any specific file among any number of others by simply searching for the added information.
Making Basic Settings
Designating the Destination
Adding File Information to Scanned Image Data
The scanner’s operation panel is used to designate the
destination where the scanned data will be saved and
send that data.
See page
3-123
Settings and registra-
tion using the DB
Assistant software
See page
3-4
Settings using the
Scanner File Utility
See page
2-1
Settings using
a Web browser
If you intend to use the Database Connection function, it will be necessary to use the DB Assistant software to
register various settings, certain information related to the computer it is installed on, as well as other information.
Then, in order to connect the DB Assistant with the scanner, you will need to use a Web browser or the scanner’s
operation panel to enter the IP address or host name of the computer the DB Assistant is installed on.
* You can also use the
scanner’s operation panel to
make network settings,
designate the location to
save the data, and register
your (the sender’s) name.
* When you add file
information (keywords) and
then search for the
corresponding information
under that same item, use
PaperPort, the software that
is bundled with this product.
v
• Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corpora-
tion of America and other countries.
• Windows Me and Windows XP is a trademark of Microsoft Corporation.
• Ethernet is a registered trademark of Xerox Corporation.
• IBM and IBM PC/AT are trademarks of International Business Machines Corporation of America.
• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
• PaperPort is a registered trademark of ScanSoft Inc. of America and other countries.
All other company and product names contained in this Instruction Handbook are trademarks or registered
trademarks of their respective companies. The designations ™ and ® will not be used in this handbook.
Trademark Information
vi
Contents
Sending Scanned Image Data to Your Computer (Scan to PC) .................................. i
Sending Scanned Image Data by Email (Send E-mail)............................................... ii
Using TWAIN Capabilities (TWAIN)............................................................................. iii
Adding File Information to Scanned Image Data......................................................... iv
Trademark Information ................................................................................................ v
Contents ...................................................................................................................... vi
Section 1 What is the Network Scanning System? ..................................................... 1-1
1-1 Outline .................................................................................................................. 1-2
1-2 Using the Scanner Utilities CD-ROM ................................................................... 1-3
1-2-1 Contents of the CD-ROM ........................................................................ 1-4
(1) Scanner Utilities.............................................................................. 1-5
(2) TWAIN Source ................................................................................ 1-6
(3) Configuration Tool ........................................................................... 1-6
(4) Documents ..................................................................................... 1-6
(5) Select Language............................................................................. 1-6
vi
1-3 Using the Scanner Function ................................................................................. 1-8
1-3-1 Basic Settings ......................................................................................... 1-12
(1) Original size selection (“Select original size”) ................................. 1-12
(2) Image transmission size selection (“Select sending size”) ............. 1-13
(3) Scanning resolution selection (“Scanning resolution”) ................... 1-13
(4) Original orientation selection (“Orig. set direction”) ........................ 1-14
(5) Image file format selection (“File type”) .......................................... 1-14
1-3-2 Image Quality Settings ............................................................................ 1-15
(1) Scanning density adjustment (“Scanning density”) ........................ 1-15
(2) Original type selection (“Original image quality”) ............................ 1-15
(3) JPEG quality selection (“JPEG level set”) ...................................... 1-15
(4) Color mode selection (“Color mode”) ............................................. 1-16
1-3-3 Other settings.......................................................................................... 1-17
(1) Page separation mode (“Page separation”) ................................... 1-17
(2) Border erase mode (“Erase”).......................................................... 1-18
(3) Output by page function (“Output by page”) ................................... 1-18
(4) Continuous scanning function (“Continuous scanning”) ................. 1-19
(5) Filing mode (“Auto selection”) ......................................................... 1-19
(6) Default file name (“File name input”) .............................................. 1-19
(7) Full scanning (“Border erase mode”) .............................................. 1-20
(8) Centering (“Centering/Image shift mode”) ...................................... 1-21
1-3-4 “Uncompress scanning” settings............................................................. 1-22
vii
Section 2 Making Settings from a Web Browser ......................................................... 2-1
2-1 WebPage Functions ............................................................................................. 2-2
2-2 Index of Objectives ............................................................................................... 2-3
2-3 Cautions ............................................................................................................... 2-4
2-3-1 If you are having trouble connecting to the scanner
from a Web browser… ............................................................................ 2-4
2-3-2 If a message appears which informs you that you can not connect,
such as “Could not open Internet Site XXXXX”... ................................... 2-4
2-3-3 If “Cannot Find Page” appears… ............................................................ 2-4
2-3-4 If a message appears which informs you that access is not allowed,
such as “xxx Access is not allowed”........................................................ 2-4
2-4 Using the WebPage Functions Interface .............................................................. 2-5
2-5 The Home Page ................................................................................................... 2-7
2-5-1 The Top Frame ........................................................................................ 2-8
2-5-2 The Menu Frame .................................................................................... 2-9
2-5-3 The Main Frame...................................................................................... 2-10
2-6 System Setting ..................................................................................................... 2-11
2-6-1 Setting Conditions ................................................................................... 2-11
2-6-2 System Basic Setting .............................................................................. 2-12
2-6-3 Scanner Setting ...................................................................................... 2-16
2-6-4 Sender List .............................................................................................. 2-18
viii
2-6-5 Reset....................................................................................................... 2-21
2-7 Scan to PC Setting ............................................................................................... 2-22
2-7-1 Destination List ....................................................................................... 2-22
2-8 Send E-mail Setting.............................................................................................. 2-29
2-8-1 E-mail Basic Setting ................................................................................ 2-29
2-8-2 Destination List ....................................................................................... 2-32
Altri manuali per KM-7530
1
Questo manuale è adatto per i seguenti modelli
8
Indice
Altri manuali Kyocera Stampante
Kyocera
Kyocera ECOSYS P2035d Manuale utente
Kyocera
Kyocera FS-600 Manuale utente
Kyocera
Kyocera ECOSYS P6021cdn Manuale utente
Kyocera
Kyocera EP C170N Manuale utente
Kyocera
Kyocera ECOSYS P5026cdw Manuale di istruzioni
Kyocera
Kyocera KM-4800w Guida
Kyocera
Kyocera TASKalfa 8353ci Manuale utente
Kyocera
Kyocera ECOSYS FS-C5250DN Manuale di servizio
Kyocera
Kyocera ECOSYS P6130cdn Manuale utente
Kyocera
Kyocera FS-1920 Ecosys Manuale utente
Kyocera
Kyocera TASKalfa 7004i Manuale utente
Kyocera
Kyocera FS-2000D Manuale utente
Kyocera
Kyocera TASKalfa 2551ci Manuale utente
Kyocera
Kyocera MT-1 Manuale utente
Kyocera
Kyocera FS-C5100DN Manuale utente
Kyocera
Kyocera ECOSYS FS-3140MFP Manuale utente
Kyocera
Kyocera FS-1300D Manuale utente
Kyocera
Kyocera ECOSYS P6021cdn Manuale utente
Kyocera
Kyocera FS-3040MFP Manuale utente
Kyocera
Kyocera Ecosys FS-6700 Manuale utente
