Kywoo3D Tycoon Max Manuale utente
Tycoon Max
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch
2
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz
3
Notes
1. After unboxing, please check whether the machine is damaged, bent, or
scratched, and check the parts against your order. If you have any questions,
please promptly contact our after-sales service via the Kywoo 3D official website
or the email address provided on the manual.
2. Do not use the printer for anything other than described herein in order to avoid
personal injury or property damage.
3. Do not place the printer near any heat source or flammable or explosive objects.
We suggest placing it in a well-ventilated, low-dust environment.
4. Do not expose the printer to violent vibration or any unstable environment, as
this may cause poor print quality.
5. Please use the recommended filaments to avoid the blockage of the extruder and
damage to the machine.
6. Do not use any other power cable except the one supplied. Always use a
grounded three-prong power outlet.
7. Do not touch the nozzle or printing surface during operation as they may be hot.
Keep hands away from machine while in use to avoid burns or personal injury.
8. Do not wear gloves or loose clothing when operating the printer. Such clothes
may become tangled in the printers moving parts leading to burns, possible
bodily injury, or printer damage.
9. After printing, use the provided tools to clean up any filament on the nozzle while
it’s still hot. Do not touch the nozzle directly with your hands.
10. Clean the printer frequently. Always turn the power off when cleaning, and wipe
with a dry cloth to remove dust, adhered printing plastics or any other material
off the frame, guide rails and wheels. Use glass cleaner or isopropyl alcohol to
clean the print surface before every print for consistent results.
11. Children under 10 years of age should not use the printer without supervision.
12. This machine is equipped with a security protection mechanism. Do not manually
move the nozzle or printing platform while booting up, otherwise the device will
automatically power off for safety.
13. Users shall comply with related national and regional laws, regulations and
ethical codes where the equipment or prints produced by it are used, and users
of our product shall not use aforesaid products to print any end-use products,
objects, parts or components or any other physical prints that violate the national
or regional laws, regulations and ethical codes where herein referred product
and produced prints by it is located.
4
Introduction
Extruder Stepper
Handle
Extruder
Screw Rod
Feed-in Knob
Nozzle Kit
Coupling
Z-axis Motor
TF card Slot
Micro USB port
SD Card Slot
Touchscreen
Linear Rail
Y-axis Motor
Polished Rod
Hotbed
Y-axis Timing Belt
Rod Fixed Seat
Y-axis Endstop
Switch
Foot Leveling Mat
5
Parts List
Body
Base Frame
Filament Holder
Binder Clip
Power Cord
Tempered Glass
200g Filament
Tool list
Spad
TF Card & Card
Reader
Open-end
Wrench
Cable Tie
Limit Switch
0,4mm Nozzle
PTFE Tube
USB Cable
Nozzle Cleaner
Slotted Screwdriver
Foot Mat
Belt Tension Spring
M5x25mm Screw
Allen Wrench Set
6
Spad
TF Card & Card
Reader
Open-end
Wrench
Cable Tie
Limit Switch
0,4mm Nozzle
PTFE Tube
USB Cable
Nozzle Cleaner
Slotted Screwdriver
Foot Mat
Belt Tension Spring
M5x25mm Screw
Allen Wrench Set
Parameters
Model
Tycoon Max
Printing Size
300*300*230mm
Molding Tech
FDM
Nozzle Number
1
Slice Thickness
0,1mm – 0,4mm
Nozzle Diameter
Standard 0,4mm
Precision
± 0,1mm
Filament
PLA/TOP/PETG/ABS/Wooden
File Format
STJ/OBJ/AMF/G Code
Working Mode
Micro USB/TF card/SD card/Wi-Fi
Slice Software
Cura/Repetier/Simplify3D
Power Supply
Input: AC 115/230V 50/60Hz
Output: DC 24 V
Total Power
350W
Bed Temp
≤110°C
Nozzle Temp
≤260°C
Resume Print
Yes
Filament Detector
Yes
Dual Z-axis
Yes
Auto levelling
Yes
Wi-Fi Printing
Yes
Octoprint
Yes, needs an additional accessory
Recommended Printing Speed
80-100mm/s
Operating System
Windows XP/7/8/10 Mac/Linux
Language Selection
Yes, supports nine languages
Supported Languages
1.Simplified Chinese; 2. Traditional Chinese; 3.
English; 4, Russian; 5. Spanish; 6 French; 7.
Italian; 8. German; 9.; Japanese
7
Assemble the 3D Printer
Install the Base
1. As shown in the picture 1a, pick up the base with the foot mat towards the front
and slide the base through the gantry frame from the front of the body. Next fix
the body and base together using four M5x25mm screws, as shown in picture 1b.
1a From the side of the body, with the
foot mat towards ahead
1b
2. Connect the cable with the Y-axis motor and connect the end-stop switch cable,
as shown in picture 2a and 2b.
2a
2b
8
3. Then connect the hotbed heating wire and thermistor wire, like in picture 3.
4. Install two-foot levelling pats as shown in picture 4, and adjust the height of the
foot levelling pats to make the printer stable or to the height that you need.
3
4
5. As shown in picture 5, fix the filament holder on the top profile, then tighten the
T-rod nuts of the holder.
5
Install the tempered Glass platform and Connect the power Cord
1. As shown in picture 1a and picture 1b, place the glass on the silver-white
platform and clamp it with the binder clips. Be careful not to clamp the hotbed
cable.
9
1a
1b
2. Select the proper input voltage to match your local mains (115/230V), 230V by
default. Damage may occur if the voltage is set incorrectly.
3. Connect the power cord and plug it in power supply. Turn the power switch to “I”
to turn on the printer, and "O" for off. Do not disconnect the cord when the
machine is powered on.
Tempered Glass
Binder Clip
10
Screen Interface
Ajust the temperature of nozzle/hotbed
Filament in/out of the extrusion
Move X/Y/Z Axis
Filament load/unload
Tools
Home X/Y/Z Axis
Settings
Connecting Wi-Fi
Change Language
Firmware version
Adjust the speed of the fan
Altri manuali per Tycoon Max
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Kywoo3D Stampante 3D
