Lanner electronics EM-551Series Manuale utente

EM-551Series

Embedded SBC

with SSD, Three-LAN and

NS Geode GX1 Low-Power CPU

This document is a copyright of the original manufacturer, 2001. The original

manufacturer reserves the right to make improvements to the product(s) described in this

manual at any time without notice. This manual may not, in whole or in part, be

photocopied, reproduced, transcribed, translated, or transmitted in whatever form without

the written consent of the manufacturer, except for copies retained by the purchaser for

backup purposes. All rights are reserved.

TRADEMARKS

The following are trademarks or registered trademarks of their respective companies: IBM,

Intel, AMD, Cyrix,NS, Award, AMI, Microsoft, Windows, Windows NT, Novell, SCO, PC/104,

PICMG, ALI, UMC, SMC, Winbond. Products mentioned in this manual are mentioned for

identification purposes only. All names of products or services appearing in this manual

are the trademarks or registered trademarks of their respective organizations and

companies.

Ver No:1.0

LEI-UM-EM-551

Date: 8.01.2001

TABLE OF CONTENTS

CHAPTER 1INTRODUCTION 1

1.1 SPECIFICATION 2

1.2 PACKING CHECK LIST 3

CHAPTER 2JUMPER SETTINGS AND CONNECTORS 4

2.1 BOARD OUTLINE OF EM-551 4

2.2 JUMPER SETTING OVERVIEW 5

2.3 JUMPER LOCATION FOR EM-551 6

2.4 JUMPER SETTINGS SUMMARY FOR EM-551 7

2.5 JUMPER SETTINGS FOR EM-551 8

2.6 I/O CONNECTORS LOCATION FOR EM-551 9

2.7 I/O CONNECTORS SUMMARY FOR EM-551 10

2.8 I/O CONNECTORS DESCRIPTION 11

CHAPTER 3AWARD BIOS SETUP 17

3.1 RUNNING AWARD BIOS 17

3.2 CMOS SETUP UTILITY 18

3.3 STANDARD CMOS SETUP 20

3.4 BIOS FEATURES SETUP 24

3.5 CHIPSET FEATURES SETUP 27

3.6 POWER MANAGEMENT SETUP 29

3.7 PNP/PCI CONFIGURATION 31

3.8 LOAD BIOS DEFAULTS 33

3.9 LOAD STE UPDEFAULTS 33

3.10 INTEGRATED PERIPHERALS 34

3.11 SUPERVISOR /USER PASSWORD 36

3.12 IDE HDD AUTO DETECTION 36

3.13 Save & Exit Setup 37

3.14 EXIT WITHOUT SAVING 37

TABLE OF CONTENTS

CHAPTER 4DRIVERS SUPPORT 38

4.1 USE YOUR DRIVER CD-ROM 38

4.2 FILE DIRECTORY 38

APPENDIX AHOW TO USE WATCH-DOG TIMER 39

APPENDIX BTECHNICAL REFERENCE 40

GLOSSARY 42

TERMS AND CONDITIONS

RMA SERVICE REQUEST FORM

~1~

CHAPTER 1. INTRODUCTION

The new EM-551 Series embedded SBC is especially designed for embedded applications

and to meet the requirements of limited space, low-cost and high-performance to suit

commercial and industrial needs. The new EM-551 Series is equipped with NS CS5530A

chipset to support NS Geode GX-1300MHz CPU fanless function, ideal for the demanding

Internet Access Devices that require a low-power and low-heat dissipation Single Board

Computer.

Targeting on the rapid growing networking and embedded system markets, the EM-551

Series comes with highly integrated and cost-effective single-chip Fast Ethernet controller

Realtek RTL8139C to support three 10/100Mbps Base-T connector (its LED is as a LAN

indicator) gives it the ability to make it the perfect solution for popular networking devices

like Gateway, Router, Thin Server, Firewall and E-Box.

The EM-551series can be expanded with one FDD interface support up to two floppy

devices; two PCI/IDE ports that support up to four IDE devices and multi-word DMA and

Ultra DMA/33 interface helps designers and integrators improve system performance by

retrieving and sending data faster.

In addition, it is also equipped with one RS-232 serial ports; twoUSB ports; one multi-mode

parallel port which supports SPP, ECP and EPP modes. It provides more flexible functions

to satisfy all users' different application requirements.

Further more the EM-551also offers several industrial features such as I/O peripheral

devices that support power saving and doze/standby/suspend modes. And with its

industrial grade reliability, the EM-551 can operate continuously at temperatures up to 60°

C (140° F). All these numerous features provide an ideal solution for commercial and

industrial applications where stability and reliability are essential.

INTRODCTION

~2~

1.1 SPECIFICATION

oProcessor :NS Geode GX1 300 MHz Low-Power CPU on-board

oChipset :NS CS5530A, Realtek RTL8139C, Winbond 83977F

oSystem Memory / RAM :32 MB SDRAM on-board

oEthernet Controller :Three Realtek RTL8139C, support three-10/100 Base-T

interface with Link and Active signal header

oIDE Interface :Two PCI IDE port, support up to four IDE devices. Supports

PIO mode 4 and Bus Master. Also supports Multi-word DMA

and Ultra DMA/33. (one 90 degree and one 180 degree)

oFloppy Drive Interface :One FDD port , support two floppy devices

oSerial Port :One COM port

oParallel Port :One Multi-mode parallel port ( SPP/EPP/ECP )

oUniversial Serial Bus :Two USB ports

oKeyboard/Mouse

connector :One 6-pin mini-DIM PS/2 keyboard/mouse connector on-

board.

oRTC :Internal RTC with Li battery

oBIOS :256KB Award license BIOS

oPower management :I/O peripheral devices support power saving and

doze/standby/suspend modes. APM 1.2 compliant.

oPower Connector :On-board 4-pin power connector (NC, GND, GND, +5), power

adapter connector (+5v, GND) and reserve power-on process

LED (Red/Green)

oOperating Temperature :0°C ~ 60°C

oStorage Temperature :-20°C ~ 70°C

oHumidity :5% ~ 95% RH, non-condensing

oDimensions :203 x 146 mm

oNet weight :350 g

oEMI/EMS :EN 50081-1/1994>EN 55022/1997>EN 61000-3-2/1995

>EN 61000-3-3/1995, EN 50082-1/1994>IEC 1000-4-2/1995,

IEC 1000-4-3/1995, IEC 1000-4-4/1995

oNote :4 layers PCB, one side SMT process

INTRODUCTION

~3~

1.2 PACKING CHECK LIST

Before you begin to install your card, please make sure that you received the following

materials as listed below:

Item Qty Remarks

5.25"Embedded SBC 1 pcs

Embedded Single Board Computer

Keyboard / Mouse “Y” shape adapter cable

1 set 8-

pin to one PS/2 keyboard connector & one PS/2

mouse connector

FDD Cable 1 pcs

34p to 34p standard header flat ribbon cable

IDE Cable 1 pcs

IDE Cable

CD-ROM 1 pcs

Drivers

VGA Cable 1 pcs

12 pin 2.54mm for 15 pin D-Sub

User‘s manual 1 pcs

EM-551

~4~

CHAPTER 2.

JUMPER SETTINGS AND CONNECTORS

The figure below shows the jumpers and connectors location:

2.1 BOARD OUTLINE OF EM-551

IDE1

IDE2

IR1

LAN1

LAN2

JP1

LAN3

KM2

COM1

4PS1

CMOS1

FDC1

LPT1

LED4

LED3

LED2

LED1

USB1

PRJK1

CON1

JP2

JP3

LANLED1

LPR1

VGA1

1 2

JP4

JUMPER SETTING AND CONNECTOR

~5~

2.2 JUMPER SETTING OVERVIEW

In order to select the operation modes of your system, configure and set the jumpers on

your SBC to match the need of your application. To set a jumper, a black plastic cap

containing metal contacts is placed over the jumper pins as designated by the required

configuration as listed in this section. Ajumper issaidto be “on” or “1-2 ” when the black

cap has been placed on two of its pins, as shown in the figure below:

A pair of needle-nose pliers is recommended when working with jumpers. If you have any

doubts about the best hardware configuration for your application, contact your local sales

representative before you make any changes. In general, you simply need a standard

cable to make most connections.

JUMPER SETTING AND CONNECTOR

~6~

2.3 JUMPER LOCATION OF EM-551

IR1

LAN1

LAN2

JP1

LAN3

COM1

CMOS1

LED4

LED3

LED2

LED1

CON1

JP2

JP3

1 2

JP4

Indice

Altri manuali Lanner electronics Computer a scheda singola

Lanner electronics

Lanner electronics MB-X66 Series Manuale utente

Lanner electronics

Lanner electronics EM-561 Series Manuale utente

Lanner electronics

Lanner electronics AP-370VF Manuale utente

Lanner electronics

Lanner electronics AP-545L Manuale utente

Lanner electronics

Lanner electronics EM-9560 Series Manuale utente

Lanner electronics

Lanner electronics PC/104 Single Board Computer with STPC Atlas CPU, and VGA, LCD, LAN, SSD, on-board RAM, 4xCOM,... Manuale utente

Lanner electronics

Lanner electronics IAC-F847 Series Manuale utente

Lanner electronics

Lanner electronics IAC-H668 Series Manuale utente

Lanner electronics

Lanner electronics IAC-F845 Series Manuale utente

Lanner electronics

Lanner electronics EM-535 Series Manuale utente

Lanner electronics

Lanner electronics EM-568 Series Manuale utente

Lanner electronics

Lanner electronics IAC-F694 Series Manuale utente

Lanner electronics

Lanner electronics EM-660 Series Manuale utente

Lanner electronics

Lanner electronics IAC-H670 Series Manuale utente

Manuali Computer a scheda singola popolari di altre marche

WIN Enterprises

WIN Enterprises PL-80910 Manuale utente

AXIOMTEK

AXIOMTEK SBC81206 Series Manuale utente

Embest

Embest SOM-PH8800 Manuale utente

SeaLevel

SeaLevel SBC-R9 Manuale utente

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuale utente

WinSystems

WinSystems PPM-LX800-G Manuale utente

GIGAIPC

GIGAIPC QBiX-PPC Series Manuale utente

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuale utente

Commell

Commell FS-978 Manuale utente

GIGAIPC

GIGAIPC QBiP-8665A/ Manuale utente

VersaLogic

VersaLogic Python EBX-11 Manuale utente

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuale utente

CompuLab

CompuLab SB-A510 Manuale utente

Boser

Boser HS-7321 Manuale utente

Premier Farnell

Premier Farnell Embest SBC8530 Manuale utente

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuale utente

Aaeon

Aaeon UP Manuale utente

Portwell

Portwell WUX Series Manuale utente