Larson Electronics EPLC2-LED-150W-RT-JB2 Manuale utente

EPLC2-LED-150W-RT-JB2

Larson Electronics, LLC Phone: Fax: (903) 498-3364 www.larsonelectronics.com

1of 3

•Be certain electrical power is OFF before and during installation and maintenance.

•Luminaire must be connected to a wiring system with an equipment-grounding conductor.

To avoid explosion:

•Make sure the supply voltage is within the luminaires’ voltage rating.

•Ensure the marked T rating is less than the ignition temperature of the Hazardous

Atmosphere.

•Do not operate in ambient temperatures above those indicated on the luminaire nameplate.

•Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

For supply connections, use wire rated for at least 110°C

Recommended mounting height is 25-40 feet.

MOUNTING

This fixture offers an adjustable surface mounting system that allows this fixture to be mounted to any

flat surface including walls and ceilings. A single ½-13 bolt is used to mount the fixture to the

surface.

1. Using bolts, washers and nuts provided, attach brackets “A” toboth sides of

bracket “B”.

2. The LED fixture has 12 holes for a versatile mount option. Select the holes that you would like

to use for the mount angle.

3. Brackets “A” will then be bolted to the LED fixture with the remaining bolts and washers.

4. The fixture is now ready for installation.

150 Watt Explosion Proof LED Flood Light

Surface Mount - 21,000 Lumens - C1D2 - Wiring Hub

Instruction Manual

This explosion proof lightis designed for illumination of industrial locations. It uses the latest in solid

state lighting technology for long life, low maintenance and high efficiency.

The unique design focuses the light where it is needed, giving improved efficiency over a

conventional HIDluminaire.

An internal, universal input, power-factor-corrected switch-mode supplyallowsit to be used from any

nominal100-277V AC 50/60 Hz or 11-25V AC/DC power supply(depending on model) without

any variation in light output.See product label for correct input voltage.

WARNING

To avoidthe risk of fire,explosion or electric shock, thisproduct should be installed, inspected

and maintained by a qualified electricianonly, in accordancewith all applicableelectrical codes.

To avoidelectric shock:

(877) 348-9680

EPLC2-LED-150W-RT-JB2

Larson Electronics, LLC Phone: Fax: (903) 498-3364 www.larsonelectronics.com

2of 3

See Images Below as a Reference

BRACKETS A

BRACKET B

BRACKETS A

BRACKET B

(877) 348-9680

EPLC2-LED-150W-RT-JB2

Larson Electronics, LLC Phone: Fax: (903) 498-3364 www.larsonelectronics.com

3of 3

WIRING (see attached wiring diagram)

This unit comes preconfigured in the selected voltage, beam configuration, and color temperature.

Wire light to the correct voltage using the applicable diagram below.Follow allapplicable local,

state, and National Electrical Code for thehazardous area!

MAINTENANCE

Caution: To avoid personal injury, disconnect power to the light and allow the unit to cool

down before performing maintenance.

Warning: No user serviceable parts inside of fixture. Risk of electric shock. Removal of the lens

will void the warranty.

1. Perform visual, mechanical and electrical inspections on a regular basis. We recommend

routine checks to be made on a yearly basis. Frequency of use and environment should

determine this. It is recommended to follow an Electrical Preventive Maintenance Program

as described in NFPA 70B: Recommended practice for Electrical Equipment.

2. The lens should be cleaned periodically as needed to ensure continued photometric

performance. Clean the lens with a damp, non-abrasive, lint-free cloth. If not sufficient, use

mild soap or a liquid cleaner.

3. Inspect the cooking fins on the luminaire to ensure that they are free of any obstructions

or contamination (i.e. excessive dust build-up). Clean with a non-abrasive cloth if

needed.

4. Do not operate if the lens is cracked or damaged. All fasteners should be properly seated.

WARRANTY

Should further information not covered by these instructions be required, please contact Larson Electronics at

1- or [email protected] for further assistance.

Please visit LarsonElectronics.com for Warranty and Return information.

WARNING: CHECK NAMEPLATE

FOR PROPER VOLTAGE. DAMAGE

FROM IMPROPER VOLTAGE WILL

VOID WARRANTY.

(877) 348-9680

877-348-9680

THESE INSTRUCTIONS MAY NOT COVER ALL DETAILS OR VARIATIONS OF THIS PRODUCT FOR YOUR EQUIPMENT OR INSTALLATION REQUIREMENTS.

SHOULD FURTHER INFORMATION NOT COVERED BY THESE INSTRUCTIONS BE REQUIRED, PLEASE CONTACT LARSON ELECTRONICS BY EMAIL AT

SAL[email protected] OR BY PHONE AT 1-877-348-9680 FOR FURTHER ASSISTANCE.

PLEASE VISIT LARSONELECTRONICS.COM FOR WARRANTY AND RETURN INFORMATION.

Indice

Altri manuali Larson Electronics Proiettore

Larson Electronics

Larson Electronics WAL-QP-2X-25 Manuale utente

Larson Electronics

Larson Electronics WAL-QP-4X500-25 Manuale utente

Larson Electronics

Larson Electronics EPLC2-WPLED-50W-RT Manuale utente

Larson Electronics

Larson Electronics LEDWP-LP-450-KNL-DCM Manuale utente

Larson Electronics

Larson Electronics BL24-LED Manuale utente

Larson Electronics

Larson Electronics GL-4600 Manuale

Larson Electronics

Larson Electronics LEDWP-600E-SSB-1227-56K Manuale utente

Larson Electronics

Larson Electronics HAL-PRM-150W-LED Manuale utente

Larson Electronics

Larson Electronics LEDEQ-PK-24X2-CPR-SPFL Manuale utente

Larson Electronics

Larson Electronics RT-100C-XEMG-10C Manuale utente

Larson Electronics

Larson Electronics Stryker Light Manuale

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-25C Manuale utente

Larson Electronics

Larson Electronics HAL-LED-174W Manuale utente

Larson Electronics

Larson Electronics LEDWP-500-M-20C Manuale utente

Larson Electronics

Larson Electronics Golight RadioRay 7901 Manuale

Larson Electronics

Larson Electronics LEDWP-LP-450-TRN-DCM Manuale utente

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-DIMM Manuale utente

Larson Electronics

Larson Electronics LEDWP-600E-M Manuale utente

Larson Electronics

Larson Electronics HAL-TRN Series Manuale utente

Larson Electronics

Larson Electronics GLR-FLK-2 Manuale utente

Larson Electronics

Larson Electronics EPLC2-LED-150W-RT-JB2-50C Manuale utente

Larson Electronics

Larson Electronics EPL-LED-150W-RT-20-HDBC Manuale utente

Larson Electronics

Larson Electronics GL-2151-6IN Manuale

Larson Electronics

Larson Electronics LEDWP-720 Manuale utente

Manuali Proiettore popolari di altre marche

VIZULO

VIZULO Micro Martin Guida utente

EuroLite

EuroLite LED IP FL-100 SMD Manuale utente

Cooper Wheelock

Cooper Wheelock XB12 Manuale utente

Allen + Roth

Allen + Roth 17624-000 Manuale utente

ADJ

ADJ 4 STAGE PAK Manuale utente

Cooper Lighting

Cooper Lighting EGL91SW233 Manuale utente

Max

Max 37496 Manuale utente

BEGA

BEGA 85 143 Manuale utente

Beamz

Beamz 151.226 Manuale utente

EuroLite

EuroLite LED IP FL-8 Manuale utente

Ledj

Ledj PERFORMER 36 RGB Manuale utente

Perel

Perel ELS3 Manuale utente

Perel

Perel ELS3WD Manuale utente

LumX

LumX LM 36130 Manuale utente

Xtricity

Xtricity 4-80053 Manuale utente

Stahl

Stahl 6521/4 Series Manuale utente

Ecosense

Ecosense EcoSpec Manuale utente

Ayrton

Ayrton minipanel FX Manuale utente