LD LDDAVE10G3 Manuale utente
LD DAVE G³ SERIES
ACTIVE 2.1 DSP BASED PA SYSTEM
LDDAVE10G³ / LDDAVE12G³ / LDDAVE15G³
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
Thank you for choosing LD-Systems!
We have designed this product to operate reliably over many years. Therefore LD-Systems guarantees for high
quality products with its name and many years of experience as a producer.
Please, take a few moments to read these instructions carefully, as we want you to enjoy your new LD-Systems
products quickly and to the fullest.
For information about LD-Systems check out our website WWW.LD-SYSTEMS.COM
Introduction
The LD Systems Dave G³ series loudspeakers are designed for professional use. They offer DSP based 2.1 sound re-
inforcement units with high quality components, powerful amplification and a well balanced sound across the entire
range of frequencies, all at a very fair price.
This series includes three 2.1 subwoofer/satellite systems of different size. The LDDAVE10G3 with a 10“ subwoofer
and 350W RMS system power, the LDDAVE12G3 with a 12“ subwoofer and 500W RMS system power and the
LDDAVE15G3 with a 15“ subwoofer and 700W RMS system power.
The internal LD LECC DSP offers digital sound processing such as crossover, equalizing, compressor and limiter
functionality which is perfectly adjusted for all LD DAVE G³ models to maintain the system´s best audio performance.
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
2
LD DAVE G³ SERIES
ACTIVE 2.1 DSP BASED PA SYSTEM
LDDAVE10G³ / LDDAVE12G³ / LDDAVE15G³
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
3
04
PREVENTIVE MEASURES:
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
4
1. Please read this information carefully.
2. Keep all information and instructions in a safe place.
3. Please follow the instructions.
4. Please observe all warnings. Don‘t remove safety instructions or any other information located on the device.
5. Use the device only in the intended manner.
6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain
that wall brackets are firmly secured. Make certain that the unit is installed securely and cannot fall down.
7. When installing please observe the corresponding safety standards for your country.
8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that
the device is always installed so that is cooled sufficiently and cannot overheat.
9. Do not place open sources of ignition, e.g., burning candles, on the device.
10. Do not cover ventilation slots.
11. Do not operate the device in the immediate vicinity of water. Do not expose this equipment to combustible
materials, liquids or gases.
12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects filled
with fluids, such as vases or drinking vessels, on top of the device.
13. Make certain that objects cannot fall into the device.
14. Use the device only with accessories with which the manufacturer intends the device to be used.
15. CAUTION: If this device has a mains connector equipped with protective earth, it must be connected to a
mains socket with a protective ground connection. Never disable the function of the protective ground connection
of the included power cord.
16. Do not turn on the device immediately if it was exposed to strong temperature fluctuations (for example after
transportation). Moisture and condensation may damage the device. Leave the device switched off until it has
reached room temperature.
17. Do not open the device and do not make any changes to the device.
18. Before connecting to mains power, make certain that the mains voltage and the mains frequency are the
same as the operating values of the device (see type label). If the device is equipped with a supply voltage selec-
tor switch, make certain that the values of the device match the values of the mains power before connecting.
If the plug on the included cord does not fit your mains outlet, contact your electrician.
19. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at
the device plug and the power plug.
20. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once
you have connected the device.
21. When connecting the device, make certain that the power plug remains readily accessible.
Always pull out the power plug when the device is not in use or when you clean the device. Disconnect the
power cord by pulling the plug not the cable.
22. Avoid switching the device on and off at short intervals, because it may shorten the durability of the device.
23. IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact
authorized service center!
24. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.
25. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked
in order to disconnect it. This also means that a tug on the power cord can pull the device out of place, thus
causing personal injuries and/or property damage. Thus please make certain to route your cables carefully.
26. If there is a risk of lightning strike or during extended periods of disuse, unplug the power plug.
PREVENTIVE MEASURES:
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
5
27. During transport, make certain that the equipment being transported cannot fall down and possibly
cause personal injuries and/or property damage.
28. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or
if it has been damaged in some other manner, turn the device off immediately und unplug the power plug. This
device should be repaired only by authorized experts.
29. Use only a dry cloth to clean the device.
30. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate
plastic and paper/cardboard.
31. Plastic bags must be kept out of the reach of children.
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer
servicing to qualified personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product´s enclosure that may be
of sufficient magnitude to constitute a risk to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION! HIGH VOLUME!
You will operate this system for professional use. Therefore the commercial use of this equipment is liable to the
rules and regulations of the Accident Prevention & Insurance Association of your industry sector. Adam Hall as a
manufacturer is bound to inform you formally about the existence of eventual sanitary risks.
Risk of hearing damage due to prolonged exposure to excessive volumes: The loudspeaker is easily capable of
generating sound pressure levels (SPL) sufficient to cause permanent hearing damage to performers, production
crew and audience members. Caution should be taken to avoid prolonged exposure SPL in excess of 90 dB.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
INSTALLATION & OPERATING:
INSTALLATION
Please place subwoofers and satellite speaker stands on stable and even ground. Do not place subwoofers and
satellite speakers on mobility carts, chairs, tables or something similar in order to prevent accidents.
We recommend Adam Hall speaker stand SPS56 or speaker pole SPS822 (M20 thread, mounted on subwoofer)
and mounting fork for speaker stands SPS823 for use with the LD DAVE G³ satellites.
The LDDAVE10G³ satellites are equipped with a speaker stand flange of 5° slope for best sound distribution.
The LDDAVE12G³ and LDDAVE15G³ satellites are equipped with the patented SM707 speaker stand flange
with variable slope. For slope angle adjustment lift the satellite speaker slightly and carefully from the latching
mechanism (approximately 1/2 cm), turn into desired angle and lower the cabinet.
OPERATING
In order to prevent unpleasant start-up noise caused by connected devices like mixers etc., the LD DAVE G³
system should be the last to be switched on and the first to be switched off.
Before switching power on, the main level control should be set to minimum.
Centre of Rotation
+/- 13,5 °
Lift cabinet
Attention! Please hold the
cabinet firmly!
Turn the cabinet into the
required angle.
Lower the cabinet.
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
6
OPTIONAL ACCESSORIES:
CASTOR BOARD
38110G3
38112G3
38115G3
CASTOR BOARD + PROTECTIVE COVER FOR
SUBWOOFERS AND SATELLITES
LDDAVE10G3SET
LDDAVE12G3SET
LDDAVE15G3SET
PROTECTIVE COVERS FOR SATELLITES
LDD10G3SATBAG
LDD12G3SATBAG
LDD15G3SATBAG
PROTECTIVE COVER FOR SUBWOOFER
LDD10G3SUBBAG
LDD12G3SUBBAG
LDD15G3SUBBAG
2 X SPEAKER STANDS WITH TRANSPORT BAG
SPS023SET
2 X SPEAKER STANDS WITH TRANSPORT BAG
+ 2 X SPEAKER CABLES
(2 X 1,5MM² SPEAKON COMPATIBLE/
SPEAKON COMPATIBLE, 5M)
SPS023SET2
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
7
BACK PANEL LDDAVE10G³:
2
1
4
3
6
57 85
9 10 11
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
8
CONTROL ELEMENTS:
1MAIN LEVEL
Main volume control of the 2.1 loudspeaker system. Volume of subwoofer and satellites affected in same
way.
2SUB PHASE
Inverts the phase of subwoofer (0°, 180°).
3SUB LEVEL
Volume control of subwoofer. Adjust the volume of the subwoofer in relation to satellites. Recommended
setting centre position (12:00h).
4LINE INPUT (LEFT/RIGHT)
Unbalanced RCA line input.
5LINE INPUT (LEFT/RIGHT)
Balanced XLR/6.3 mm jack (combo) line input.
6SAT POWER OUT (LEFT/RIGHT)
Powered Speakon compatible output for LD DAVE G³ series.
7POWER
Power ON/OFF switch. Before switching power on, all level controls should be set to minimum.
8MAINS SOCKET (VOLEX POWER PLUG)
With built-in fuse holder AC connection via IEC connector (220 - 240V AC).
A power cord with a lockable Volex connector is supplied with this unit.
IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact
authorized service center!
9ON LED
Lights up when power is switched on and mains cable is connected correctly.
10 SIGNAL LED
Lights up when the unit receives an audio signal.
11 LIMIT LED
Lights up when the loudspeaker is operated at its limit. Short-term blinking of the LED is not critical.If the
limiter LED lights up longer than a brief moment or permanently (= over-driving the system), reduce the
volume of the connected signal source. Non-co mpliance will lead to unpleasant and distorted sound and
may cause malfunction of the speaker system.
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
FRANCAIS FRANCAIS
FRANCAIS FRANCAIS
DEUTSCH
ENGLISH
9
BACK PANEL LDDAVE12G³ (shown) & LDDAVE15G³:
2
1
4
3
66
55
77
89
1MAIN LEVEL
Main volume control of the 2.1 loudspeaker system. Volume of subwoofer and satellites affected in same
way.
2SUB PHASE
Inverts the phase of subwoofer (0°, 180°).
3SUB LEVEL
Volume control of subwoofer. Adjust the volume of the subwoofer in relation to satellites. Recommended
setting centre position (12:00h).
10 11 12 13
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS ESPAÑOLPOLSKIITALIANO
10
Altri manuali per LDDAVE10G3
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Lingue:
Altri manuali LD Altoparlanti
