LeCroy PP011 Manuale utente
PP011-1 X
PP011-2
LeCroy PP011
Passive Probe
Instruction Manual
Revision A – October 2006
Warranty
LeCroy warrants this oscilloscope accessory for normal use and operation within specification for a period of one
year from the date of shipment. Spare parts, replacement parts and repairs are warranted for 90 days.
In exercising its warranty, LeCroy, at its option, will either repair or replace any assembly returned within the
warranty period to the Customer Service Department of an authorized service center. However, this will be done
only if the product is determined by LeCroy’s examination to be defective because of workmanship or materials,
and the defect is not caused by misuse, neglect, accident, abnormal conditions of operation; or, damaged by
attempted repair or modifications by a non-authorized service facility.
The customer will be responsible for the transportation and insurance charges for the return of products to the
service facility. LeCroy will return all products under warranty with transportation charges prepaid.
This warranty replaces all other warranties, expressed or implied, including, but not limited to, any implied warranty
of merchantability, fitness, or adequacy for any particular purposes or use. LeCroy shall not be liable for any
special, incidental, or consequential damages, whether in contract or otherwise.
Corporate Headquarters
700 Chestnut Ridge Road
Chestnut Ridge, NY 10977-6499
Tel: (845) 425-2000 Fax: (845) 425-8967
Internet: www.lecroy.com
© 2006 by LeCroy Corp. All rights reserved.
LeCroy, ActiveDSO, ProBus, SMART Trigger, JitterTrack, WavePro, WaveMaster, WaveSurfer, and Waverunner
are registered trademarks of LeCroy Corporation. Other product or brand names are trademarks or requested
trademarks of their respective holders. Information in this publication supersedes all earlier versions. Specifications
subject to change without notice.
Manufactured under an ISO 9000
Registered Quality Management
System
Visit www.lecroy.com to view the
certificate.
This electronic product is subject
to disposal and recycling
regulations that vary by country
and region. Many countries
prohibit the disposal of waste
electronic equipment in standard
waste receptacles.
For more information about proper
disposal and recycling of your
LeCroy product, please visit
www.lecroy.com/recycle.
PP011-OM-E Rev A
914602-00 Rev A
2 PP011-OM-E Rev A
Safety Information
This symbol appears on the product:
It refers you to additional information contained in this manual. The corresponding information in the manual is
similarly denoted.
To avoid personal injury and to prevent fire or damage to the probe or any products connected to it, review and
comply with the following safety precautions.
Connect to properly grounded instruments. This probe is to be used only with test instruments having input
connectors with the BNC shield (ring) connected to earth ground.
Connect the probe properly:
Connect the probe to the measurement instrument before connecting the probe to test circuit. Do not
disconnect the probe from the test instrument while the input is connected to the test circuit.
Do not connect the probe ground terminal to any point in the test circuit which is at a potential other than earth
ground.
Do not apply any potential to the input which exceeds the maximum ratings of the probe.
Comply with the voltage derating curve. When measuring high frequency signals, be sure to comply with the
Voltage vs. Frequency derating curve found on page 5.
Do not use in wet or explosive atmospheres.
For indoor use only. This probe is intended for indoor use and should be operated in a clean, dry environment.
Do not use the probe if any part is damaged. All maintenance should be referred to qualified service personnel.
Avoid physical injury. The probe tip is extremely sharp. Use care when handling to prevent injury, including
accidental skin puncture.
Use of the probe and/or the test instrument it is connected to in a manner not specified by the manufacturer may
impair the protection mechanisms.
PP011-OM-E Rev A 3
Introduction
The PP011 is a miniature high impedance passive probe. Its high input resistance and low capacitance make it
ideal for general purpose probing of signals with frequency content from DC through several hundred MHz. The
PP011 has a large selection of connection accessories, supplied standard with the probe and available from
LeCroy as optional accessories.
The PP011 is designed for use with > 600 MHz LeCroy WaveSurfer oscilloscopes.
Specifications
Electrical Characteristics
Attenuation 10:1 ±1%
Input Resistance 10 MΩ±1%
Input Capacitance 9.5 pF
Input Impedance (see plot on page 5.)
Compensation Range 10 – 20 pF
Bandwidth 500 MHz (-3 dB)
Electrical Ratings
Maximum Input Voltage Measurement category I: 400 Vrms,
1250 V transient overvoltage
(see voltage derating curve on page 5)
Measurement category II: 300 Vrms CAT II
Pollution Degree 2
Measurement category I is for measurement performed on circuits not directly connected to a mains supply.
Measurement category II (CAT II) is for measurement performed on circuits directly connected to a low voltage
installation. This refers to local distribution level, applicable to equipment connected to the mains (AC power
source) through a power cable.
Pollution Degree 2 refers to an operating environment where normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
4 PP011-OM-E Rev A
Specifications (continued)
General Characteristics
Operating Temperature 0oto +50oC
Storage Temperature -40oto +71oC
Altitude, Operating up to 2000 m (6560 ft)
Cable Length 1.3 m
Weight (probe only) 46 g
Max. VIN versus Frequency, Typical Input Impedance
Measurement category I
PP011-OM-E Rev A 5
Certifications
This probe is designed to conform to 73/23/EEC + amendment 93/68/EEC Low Voltage Directive (LVD) per the
following standards:
CEI/IEC 61010-031:2002-01 Safety requirements for electrical equipment for measurement control and laboratory
use:
Part 031: Safety requirements for hand-held probe assemblies for electrical
measurement and test.
Frequency (Hz)
100 K 1 M 10 M
0
VIN
(Vrms)
50
150
250
350
400
300
200
100
ZIN
(Ω)
10
100 k
10 M
1 M
10 k
1 k
100
Frequency (Hz)
1 k 1 M 100 M
100 M
Connectivity Accessories
LeCroy provides 24 individual accessories for the PP011 probe, which enable reliable connections to any physical
requirement. In addition to those provided with the standard probe, several optional varieties are available either
individually, or grouped in sets related to specific application needs.
The PK005A series of connectivity accessories are compatible with any LeCroy 5 mm PP011 series probe.
Accessories are shown with the LeCroy part number followed by the description.
Standard Accessories
PK1-5MM-101 PK1-5MM-102 PK1-5MM-103
Sprung Hook Standard Ground Lead Adjustment Tool
PK1-5MM-104 PK1-5MM-105 PK1-5MM-106
Rigid Tip, 0.8 mm Insulating Cap Color Coding Rings (set)
(Not shown) Protective Cap
PP011-OM-E
Instruction Manual
6 PP011-OM-E Rev A
Optional Accessories
PK1-5MM-109 PK1-5MM-124 PK1-5MM-108 PK1-5MM-118
Spring Tip, 0.8 mm Spring Tip, 0.38 mm IC Cap, 2.54 mm pitch Ground Spring
Input Adapters and Clips
PK1-5MM-111 PK1-5MM-112 PK1-5MM-116 PK1-5MM-117
Single Lead Adapter Dual Lead Adapter Adapter, 2 mm plug Adapter, 4 mm plug
PK1-5MM-113 PK1-5MM-114Y PK1-5MM-115Y
Pico Hook™ PK1-5MM-114G PK1-5MM-115G
Micro Clip, Long Micro Clip, Short
PP011-OM-E Rev A 7
PK1-5MM-110
BNC Adapter
P
PCB Adapter (For low voltage use only ≤42 Vpk AC + DC)
n circuit
boards to e, high frequency test point which eliminates the need to hand hold the probe.
Probe connected using PCB Adapter PC Board hole size and pattern
K1-5MM-107
Use of PCB Adapter
The PCB adapter (LeCroy P/N PK1-5MM-107) is intended to be designed into and permanently installed i
provide a reliabl
1.5 mm
(0.059”) 1.0 mm x 4
(0.039”)
5.8 mm
(0.200”)
8 PP011-OM-E Rev A
Ground Leads
PK1-5MM-119 PK1-5MM-120 PK1-5MM-121
Ground Lead with mini clip Ground Lead with 8 mm socket Ground Lead with 2 mm plug
PK1-5MM-122 PK1-5MM-123*
Ground lead with 4 mm plug High Frequency Compensated Ground Lead
*The PK1-5MM-123 High Frequency compensated ground lead allows operation with long ground lead with
minimum signal distortion.
PP011-OM-E Rev A 9
10 PP011-OM-E Rev A
Probe Connectivity Kits
The following kits containing an assortment of probe connection accessories can be ordered directly from LeCroy.
Refer to the illustrations on pages 6-9 for identification.
PKIT1-5MM-102 Basic Adapter Kit replaces the common standard accessories, with 1 each of PK1-5MM-110,
PK1-5MM-104, PK1-5MM-103, PK1-5MM-108, PK1-5MM-117, PK1-5MM-101, PK1-5MM-102, PK1-5MM-118,
PK1-5MM-123; 6 each of PK1-5MM-109; and 5 each of PK1-5MM-124.
PKIT1-5MM-101 Micro Clip Kit adapts the probe for use with 0.5 mm IC lead clips. It contains 1 each of PK1-
5MM-115Y, PK1-5MM-115G, PK1-5MM-114Y, PK1-5MM-114G, PK1-5MM-111.
Use and Maintenance
This probe is a high quality, precision instrument. To maintain accuracy and signal fidelity, mechanical shock
should be avoided, as well as damage to the cable through excessive bending.
Avoid placing excessive force sideways on the tip.
Should the tip become damaged, it may be replaced by the user using the procedure listed on the last page.
Other maintenance and component replacement should be referred to qualified personnel.
Cleaning
The outside of the probe should be cleaned with a soft cloth dampened with either deionized / distilled water or
isopropyl alcohol. Allow the surface to dry completely before returning the probe to service. Never immerse the
probe in any liquid.
Indice
Altri manuali LeCroy Apparecchiature di prova
LeCroy
LeCroy HDO6000 Manuale utente
LeCroy
LeCroy WAVESURFER Manuale utente
LeCroy
LeCroy WaveJet 300A series Manuale utente
LeCroy
LeCroy LSA1000 Manuale utente
LeCroy
LeCroy WavePro 7 Zi series Manuale elenco delle parti
LeCroy
LeCroy PP006D Manuale utente
LeCroy
LeCroy ADP300 Manuale utente
LeCroy
LeCroy Xs-A Manuale utente
LeCroy
LeCroy WaveJet 300A series Manuale utente
LeCroy
LeCroy WaveMaster 8 Zi Manuale elenco delle parti
LeCroy
LeCroy WaveSurfer MXs-B Manuale utente
LeCroy
LeCroy HDO6000 Manuale utente
LeCroy
LeCroy WaveJet 300A series Manuale utente
LeCroy
LeCroy MS-500 Manuale utente
LeCroy
LeCroy LabMaster 9 Zi-A Manuale elenco delle parti
LeCroy
LeCroy WaveAce series Manuale elenco delle parti
LeCroy
LeCroy WaveSurfer 400 Series Manuale utente
LeCroy
LeCroy LC564DL Manuale utente
LeCroy
LeCroy WaveJet 300A series Manuale elenco delle parti
LeCroy
LeCroy WaveRunner XI Series Manuale utente
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
