Letscom ST-BE32 Manuale utente
Wireless Earbuds
ST-BE32
User Manual
Thank you for purchasing our products. This manual addresses the
safety guidelines, warranty and operating instructions. Please review
this manual thoroughly before operating your device.
- 1 -
Wireless earbuds × 1 pair (left and right)
Charging case × 1
Eartips × 3 pairs (large, medium, small)
Micro USB cable × 1
User manual × 1
At a Glance
Package Contents
The charging case can also be
used as a cell phone stand.
Charging Case
MFB button
(multi-function button)
LED indicator
Microphone
Left Earbud
(Main Earbud)
Right Earbud
Replaceable eartips
Charging contacts
L
R
LED indicator
Micro USB
charging port
Groove for holding cell phones
flashes red and blue alternately
flashes red and blue alternately
every 6 seconds
alternately
minute
seconds and a voice reminder prompts
Charging case is being charged
indicators flash alternatively
indicators flash alternatively
indicator flashes
Earbud LED Indicator Guide
Charging Case LED Indicator Guide
(with earbuds in the case)
Charging case is not being charged
Note：
- 3 -
Insert the earbud into your ear and rotate to fit comfortably. Ensure the
microphone is pointing towards your mouth.
Wearing the Earbuds
When you use the earbuds for the first time, remove the insulating
films on the charging contacts of the earbuds.
Charge the earbuds
1) Align the charging contacts on the right earbud with the charging
pins on the right side of the case.
3) When the earbuds LED indicators stay red, close the case.
Using the Earbuds
Charge the charging case
1) Plug the small end of the USB cable into the Micro USB port of the
charging case.
that is powered on.
Notes:
charging case can be used as a standalone charger.
into the case and close the case, the earbuds will not turn off
automatically. Turn off the earbuds manually.
automatically the time you take them out. Turn on the earbuds
manually.
Power on/off
Power on
charging case.
to turn on.
Note：
When you use the earbuds for the first time, remove the
insulating films on the charging contacts of the earbuds, and turn
on the earbuds by pressing and holding the MFB buttons on both
Power off
the charging case.
(when both earbuds are paired with your phone, press and hold
the MFB button on either left or right earbud, the other earbud will
be off at the same time).
Note：
When the earbuds are being charged in the charging case and
the charging case is out of power, the earbuds will turn on
automatically. If the Bluetooth of your Bluetooth device
connected to the earbuds before is on and device is within
pairable range, earbuds will connected to your device
automatically; if the Bluetooth of your Bluetooth device
connected to the earbuds before is off or device is not within
Pair
Pair both earbuds (Pair use)
1) Make sure the earbuds and your phone or other Bluetooth devices
3) Turn on the earbuds (when they are in shutdown state) and the
earbuds enter pairing mode (LED indicator on the left earbud
flashes red and blue alternately).
- 6 -
code to pair.
9:(+2
$0
9:(+2
Notes:
them on.
automatically when they are turned on. Please turn on the Bluetooth
of your Bluetooth device before turning on the earbuds.
MFB button of the left earbud until the indicator on the left earbud
flashes red and blue alternately and earbud enters pairing mode.
Choose "-L" in your phone to pair and turn on the right
earbud.
earbud back to the charging case, you can use the left earbud alone
without interruption; but if you put the left earbud back to the
charging case, the right earbud is also disconnected to your phone
and you have to pair the right earbud with your phone again to use
the right earbud alone.
Pair ONE earbud (Mono Use)
You can use both earbuds simultaneously or use either of the two
earbuds alone.
1) Make sure the earbud and your phone or other Bluetooth devices
3) Take the earbud out of the charging case.
seconds.
flashes red and blue alternately and earbud enters pairing mode.
6) In the list of found Bluetooth devices in your phone or other
Bluetooth devices, choose "-L" if you use the left earbud or
"-R" if you use the right earbud to pair.
Note:
When the left/right earbud is connected to your phone and you take
the other earbud out of the charging case, earbuds will pair with each
other and then link back to your phone automatically (in the condition
that you have paired both earbuds with your phone before) .
Play/pause playing songs
Press the MFB button to pause and press the MFB button again to
resume playing songs.
Last/Next song
Press and hold the MFB button on the left/right earbud for 3
- 8 -
Volume
Press the MFB button on the left/right earbud twice to
decrease/increase the volume.
Answer/hang up/reject calls
incoming call.
ongoing call.
incoming call.
Note:
To make/answer calls using erabuds, choose
"-L" as "Audio" route on your phone when you are
making/answering calls.
Reset the earbuds/clear all pairing information on the
earbuds
seconds until the indicators on earbuds flash red and blue
alternatively and then go off.
- 9 -
Altri manuali per ST-BE32
1
Indice
Altri manuali Letscom Cuffie
