Levolor Shutters Remote Control Manuale utente
Shutters Remote Control
Guide
Shutters Guide de la télécommande
Shutters Guía de control remoto
2Remote Control Guide
Table of Contents
© 2019 LEVOLOR®, Inc.
Thank you for purchasing a LEVOLOR® motorized
shutter. This guide will help you set up and operate
your new remote control and help you understand
all functions and capabilities, allowing you to make
the most of your new shutters.
Table of Contents
Remote Control Buttons ...................................................3
Explanation of Functions ........................................... 4 – 5
GROUPS ........................................................................4
FAVORITES ...................................................................4
Travel Limit/Stops ........................................................5
Manual Control Button .................................................5
Standard Battery Pack .................................................5
Remote Reset Button ...................................................5
LEVOLOR App Overview ....................................................6
Getting Started ..................................................................7
Battery Placement .......................................................7
Tools Needed to Mount Remote Holder......................7
Mounting Instructions ..................................................7
Activating and Operating ..........................................8 – 10
Join a Shutter to a GROUP ...........................................8
Set a FAVORITE Position ..............................................8
Operating Shutters .......................................................9
Remove a Shutter from a GROUP .............................10
Creating a Duplicate or Second Remote ...................10
Additional Programming ..................................................11
Reset Shutter Programming .......................................11
Reset Travel Limits .......................................................11
Reset Remote ..............................................................11
Battery Replacement ...................................................... 12
Trouble Shooting .............................................................. 13
Radio Frequency Compliance ..................................14–15
Warranty ............................................................................ 15
3
Remote Control Buttons
BACK
All
Favorite
Groupings
Stop
Groupings
Programming
Light
Battery
Compartment
Reset
Button
Function
Arrows,
Tilt Open,
Tilt Closed
FRONT
Button Key Symbol Function LED Light Color
All all Select all shutter
groups at once
Groupings 1 ,2, 3,
4, 5, 6
Shutter Groups Blue LED
Indicator Light
Favorite ♥Moves louver to preset
favorite position
Open Tilt Open
Close Tilt Closed
Stop Stops Movement
Left Arrow Tilt Down
Right Arrow Tilt Up
Programming
Light
White LED
Indicator Light
Remote Control Guide
4
Explanation of Functions
ALL
1 2 3
4 5 6
ALL
1 2 3
4 5 6
GROUP Buttons
FAVORITES Button
Remote Control Guide
Once your remote is programmed, you will be able to
adjust and control your shutter louver position with a
touch of a button.
By setting up GROUPS and FAVORITES you will be able to
perform all functions.
GROUPS
Joining a shutter to a GROUP is what connects
a shutter to an individual remote and allows the
remote to communicate with the shutter, so
the shutter will follow the remote's commands.
A shutter will not operate with the remote,
unless it is assigned to a GROUP.
Each LEVOLOR® remote offers 6 GROUP
assignments, designated by buttons
numbered 1, 2, 3, 4, 5 and 6 on the remote.
A GROUP can consist of a single shutter, or be comprised
of multiple shutters, assigned to that particular GROUP
button. Shutters assigned to the same GROUP, will operate
at the same time, when functions are selected on the remote.
There is no limit to the number of shutters you can assign to
a given GROUP.
If you want a shutter to operate independently of other shutters,
it must be added to a GROUP of its own.
A shutter can be added to more than one GROUP on the
same remote (or separate remotes).
Once the shutters have been joined to a GROUP, the remote
will operate your shutter.
See page 8 "JOIN A SHUTTER TO A GROUP" or download the
LEVOLOR App, which will easily walk you through the process.
FAVORITES
Setting FAVORITES stores a preferred position
for each individual shutter, and recalls stored
position when the FAVORITES button is
selected. (FAVORITES button is designated
by the heart ♥ symbol.) Each shutter can
have ONLY ONE FAVORITE position. Upon
arrival, each of your shutters will be set to the
default FAVORITE position, which is louvers
horizontal. You can re-program each shutter
to your FAVORITE position.
5
Explanation of Functions
Remote Control Guide
NOTE: the FAVORITE position for a given shutter is
stored in the shutter itself. The favorite position is always
the same regardless of which GROUP or GROUPS the
shutter is assigned to or which remote you use. If you
set a FAVORITE with one remote for one shutter, and
then overwrite it with another FAVORITE position with
a different remote, you will only have the FAVORITE as
set by the last remote. From now on, any remotes
programmed to that shutter will trigger the same
FAVORITE position.
See page 8 "Set a FAVORITE position" or download the
LEVOLOR App, which will easily walk you through the process.
TRAVEL LIMIT/STOPS
The points when a louver stops along its travels. If the louver
does not travel as expected, these limits can be adjusted by
resetting the louver travel limits.
See page 11 for instructions on "RESETTING TRAVEL LIMITS."
MANUAL CONTROL BUTTON
The manual control button
is located on the back side
of the shutter panel. This
button is used to program
the LEVOLOR® App and
your remote.
STANDARD BATTERY PACK
The standard power source provided
with the LEVOLOR® motorized operating system. The battery
pack is a tube of batteries that is connected to and is installed in
the shutter panel to supply power to the shutter, allowing it to
link and function with the app and remote control.
REMOTE RESET BUTTON
A small recessed button located under the battery
compartment cover on the back of the remote. This
is used when creating a duplicate remote and/or
resetting the remote.
Manual
Control
Button
Battery Compartment
Louver
6
LEVOLOR® App Overview
Remote Control Guide
LEVOLOR® APP OVERVIEW
Unlock your shutters' full potential; download the
LEVOLOR App for advanced controls and easy 3 Step
Set-Up Guide.
Easily organize and control all of your motorized LEVOLOR
products by pairing your remote(s) to the LEVOLOR App.
The app’s advanced controls allow you to adjust your window
coverings, create favorite preset positions, and program your
shutters to run automatically on a timed schedule.
Download the app to your mobile device from the Google
Play or Apple App Store. The LEVOLOR App is compatible
with Android (version 5.1 or newer) and Apple iOS (version
11.0 or newer).
The app is powered by Bluetooth connectivity, which allows
your iOS and Android devices to control your window coverings
wirelessly over short distances. Both your mobile device and
remote must be within range of your window covering(s) in
order to control them using the app and to create or edit a
preset schedule or Favorite.
NOTE: Your mobile device ONLY needs to be within range
of the remote and the window covering in order to create or
edit a schedule. The window covering will then automatically
run according to the programmed schedule regardless of
the location of your mobile device as long as the remote is
within range.
or GET IT ON Google Play
7Remote Control Guide
BATTERY PLACEMENT
1. Remove the back cover, to expose the battery
compartment.
2. Use two new AAA Alkaline batteries (provided).
Slide a battery into each compartment being
sure to align correct positive and negative ends
and press into place.
3. Replace the back cover.
TOOLS NEEDED TO MOUNT REMOTE HOLDER
— Power drill — 3
⁄32" drill bit
— Phillips screwdriver — Pencil
— Drywall anchors, if mounted into drywall (not provided).
MOUNTING INSTRUCTIONS
1. Choose a location to mount the remote holder.
2. Orient the remote holder on the wall. Mark
screw holes.
3. If you are mounting the remote holder onto wood,
use a 3⁄32" drill bit to drill the screw holes.
4. Attach the remote holder to the wall using the
screw provided.
5. Snap screw cover over screw.
6. Gently push the remote into the remote holder
until it is snug.
NOTE: If you are mounting the Remote Holder onto
drywall, use drywall anchors.
Curved edge
should be
on top
Getting Started
8
Activating and Operating
Remote Control Guide
JOIN A SHUTTER TO A GROUP
NOTE: The LEVOLOR® remote will not operate a shutter until
the shutter has been added to a GROUP.
1. Press and hold STOP until the WHITE programming
light starts flashing, then release. This puts the remote
in program mode.
2. Press the desired GROUP number (1, 2, 3, 4, 5 or 6) on
the remote. The BLUE GROUP indicator light above
the GROUP button will flash to show it is selected.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
OPEN on the remote until the shutter moves slightly
to indicate it has been joined to the GROUP.
5. Release both buttons.
6. To exit program mode press and hold STOP until
the lights stop flashing.
SET A FAVORITE POSITION
Each shutter has one FAVORITE position. Default setting is
louvers horizontal. Setting a new FAVORITE position over-
writes any previous setting.
1. Using the manual control button move the louvers to
the preferred FAVORITES position.
2. Press and hold STOP until the WHITE programming
light starts flashing, then release. This puts the remote
in program mode.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, use your other hand to press and hold ♥
FAVORITE on the remote until the louvers move slightly
to indicate it has set this position as your FAVORITE.
5. Release both buttons.
6. To exit program mode press and hold STOP until
the lights stop flashing.
Note: It is recommended that only similar window
coverings be included in a GROUP because of
differences in product features and operation.
9
Activating and Operating
Remote Control Guide
OPERATING SHUTTERS
Once the shutter have been joined to a GROUP or multiple
GROUPS, the remote is ready to operate the shutter(s).
Multiple shutters can be operated at the same time.
1. To wake up the remote press STOP. The BLUE
indicator light from the last GROUP(S) selected
will be highlighted and active.
2. Press ALL or GROUP 1, 2, 3, 4, 5 or 6 button(s) to
select specific shutter(s) to operate. The selected
GROUP(S) BLUE indicator light above the number
will light to show they are selected.
3. Multiple GROUP buttons may be selected at the
same time.
4. To deselect a GROUP, press the GROUP button again.
The BLUE indicator light above the GROUP button
will go out.
5. Press OPEN to tilt open the louvers of the
selected shutter(s).
6. Press CLOSE to close the louvers of the
selected shutter(s).
7. Press the RIGHT ARROW to open the louvers.
8. Press the LEFT ARROW to close the louvers.
9. Press STOP to stop louver movement anywhere
along its travel path.
10. While the louvers are in motion, press the opposite of
its motion ( OPEN or CLOSE) to reverse direction.
11. Press ♥ FAVORITE and the louvers will move to your
preset FAVORITE position.
10
Activating and Operating
Remote Control Guide
REMOVE A SHUTTER FROM A GROUP
1. Press and hold STOP until the WHITE programming
light starts flashing, then release. This puts the remote
in program mode.
2. Press the desired GROUP number (1, 2, 3, 4, 5 or 6) on
the remote. The BLUE GROUP indicator light above
the GROUP number will flash to show it is selected.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, press and hold CLOSE on the remote
until the shutter moves slightly to indicate it has
been removed from the GROUP.
5. Release both buttons.
6. To exit program mode press and hold STOP until
the lights stop flashing.
CREATING A DUPLICATE OR SECOND REMOTE
1. Remove the back cover from the new remote.
2. Using a paper clip, press and hold the recessed reset
button until the BLUE GROUP indicator lights double
flash followed by a triple flash, making a total of five
flashes. Note there will be a delay between the double
flash and the triple flash. Replace the back cover.
3. Press and hold STOP on the original remote until
the WHITE programming light starts flashing, then
release. This puts the remote in program mode.
4. With one hand press and hold ALL on the new remote.
5. While continuing to hold down the ALL button press
and release STOP on the original remote.
6. All of the BLUE GROUP indicator lights on the duplicate
remote will flash twice to indicate all of the information
from the original remote has been copied.
7. To exit program mode press and hold STOP until
the lights stop flashing.
Altri manuali per Shutters Remote Control
1
Indice
Altri manuali Levolor Telecomando
