Levolor Woods Standard Manuale utente
Woods Standard Remote Control
Guide
Control remoto estándar para
persianas de madera
Télécommande standard Woods
2Remote Control Guide
Table of Contents
© 2019 LEVOLOR®, Inc.
Thank you for purchasing a LEVOLOR® motorized wood
blind. This guide will help you set up and operate your new
remote control and help you understand all functions
and capabilities, allowing you to make the most of your
new window coverings.
Table of Contents
Remote Control Buttons ...................................................3
Explanation of Functions ........................................... 4 – 6
GROUPS ........................................................................4
FAVORITES ...................................................................5
More than One Remote ................................................5
Terms to Know ..............................................................6
Getting Started ..................................................................7
Battery Placement .......................................................7
Mounting Instructions ..................................................7
Activating and Operating ..........................................8 – 10
Join a Blind to a GROUP ...............................................8
Set a FAVORITE Position ..............................................9
Operating Blinds .........................................................10
Additional Programming ..........................................11 – 12
Remove a Blind from a GROUP ..................................11
More than One Remote ...............................................11
Create a Duplicate Remote ........................................ 12
Reset Window Covering / Remote ................................13
Reset Blind Programming ..........................................13
Reset Travel Limits ......................................................13
Reset Remote .............................................................13
Battery Replacement ...................................................... 14
Trouble Shooting .............................................................. 15
Radio Frequency Compliance ................................ 16 – 17
Warranty ............................................................................ 17
3
Remote Control Buttons
BACK
All Favorite
Groupings
Programming
Light
Indicator
Light
Battery
Compartment
Reset
Button
Function
Arrows
Stop
FRONT
Button Key Symbol Function LED Light Color
All all Select all groups of
blinds at once
Groupings 1 ,2, 3 Controls Groups
of Blinds
Green LED
Indicator Light
Favorite ♥Moves Blinds to preset
favorite position
Up Arrow ▲Tilts slats to open
at 50% position
Down Arrow ▼Tilts slats to open
at 50% position
Stop ■Press and hold for
programming mode
Left Arrow Tilts slats down to
closed position
Right Arrow Tilts slats down to
closed position
Programming
Light
Red LED
Indicator Light
Remote Control Guide
4
Explanation of Functions
1 2 3
all
open
close
Remote Control Guide
GROUP Buttons
Once your remote is programmed, you will be able to
operate and control the position and adjustment of
your new blinds with a touch of a button.
By setting up GROUPS and FAVORITES you will be able to
perform all functions.
GROUPS
Joining a blind to a GROUP is what connects
a blind to an individual remote and allows the
remote to communicate with the blind, so
the blind will follow the remote's commands.
A blind will not operate with the remote,
unless it is assigned to a GROUP.
Each LEVOLOR® remote offers 3 GROUP assignments,
designated by buttons numbered 1, 2, and 3 on the remote.
A GROUP can consist of a single blind, or be comprised of
multiple blinds, assigned to that particular GROUP button.
Blinds assigned to the same GROUP, will operate at the same
time, when functions are selected on the remote. There is no
limit to the number of blinds you can assign to a given GROUP.
If you want a blind to operate independently of other blinds, it
must be added to a GROUP of its own.
A blind can be added to more than one GROUP on the same
remote (or separate remotes).
Once the blinds have been joined to a GROUP, the remote will
operate your blind.
See page 8 "Join a blind to a group".
5
Explanation of Functions
1 2 3
all
open
close
Remote Control Guide
FAVORITES
Setting FAVORITES stores a preferred position
for each individual blind, and recalls stored po-
sition when the FAVORITES button is selected.
(FAVORITES button is designated by the heart ♥
symbol.) Each blind can have ONLY ONE FAVORITE position.
Upon arrival, each of your blinds will be set to the default FA-
VORITE position, which is slats tilted up at a 45 degree angle.
You can re-program each blind to your FAVORITE position.
NOTE: the FAVORITE position for a given blind is stored in the
blind itself. The favorite position is always the same regardless
of which GROUP or GROUPS the blind is assigned to or which
remote you use. If you set a FAVORITE with one remote on one
blind, and then overwrite it with another FAVORITE position
with a different remote, you will only have the FAVORITE as set
by the last remote. From now on, any remotes programmed
to that blind will trigger the same FAVORITE position.
See page 9 "Set a FAVORITE position".
MORE THAN ONE REMOTE
Each motorized blind can be ordered with or without a
remote. If you chose to have multiple remotes, you have
two options in how each remote will function.
1. Additional remote
• Can be programmed differently from original remote.
• Can control a different set of blinds and/or
different GROUPS.
2. Duplicate remote
• An exact duplicate of original remote.
• Must control the same set of blinds and/or
GROUPS.
See page 12 for instructions on creating duplicate remote.
TRAVEL LIMIT/STOPS
The points when a slat stops along its travels. The slats
should travel from fully closed tilted down, to fully closed
tilted up. If the slats do not travel as expected, these limits
can be adjusted by resetting the blind travel limits.
See page 13 for instructions on Resetting Travel Limits.
FAVORITES Button
6
Explanation of Functions
Remote Control Guide
MANUAL CONTROL BUTTON
A manual control button is located on the motor side of the
headrail. This button can control the window covering without
the remote. This button is also used to program your remote.
STANDARD BATTERY PACK
The standard power source provided with the LEVOLOR®
motorized operating system. The battery pack is a tube of
batteries that is connected to and is installed behind the
headrail to supply power to the blind, allowing it to link and
function with the remote.
SATELLITE BATTERY PACK
An optional power source that allows the battery pack to be
mounted to the valance, next to molding or under the sill. It is
the best choice when the window covering is mounted in a high
window, restricting access to the battery pack.
REMOTE RESET BUTTON
A small recessed button located under the battery
compartment cover on the back of the remote. This
is used when creating a duplicate remote and/or
resetting the remote.
7Remote Control Guide
Getting Started
BATTERY PLACEMENT
1. Remove the back cover, to expose the battery
compartment.
2. Use two new AAA Alkaline batteries (provided).
Slide a battery into each compartment being
sure to align correct positive and negative ends
and press into place.
3. Replace the back cover.
TOOLS NEEDED TO MOUNT REMOTE HOLDER
— Power drill
— 3⁄32" drill bit
— Phillips screwdriver
— Pencil
— Drywall anchors, if mounted into drywall
(not provided).
MOUNTING INSTRUCTIONS
1. Choose a location to mount the remote holder.
2. Orient the remote holder on the wall. Mark
screw holes.
3. If you are mounting the remote holder onto wood,
use a 3⁄32" drill bit to drill the screw holes.
4. Attach the remote holder to the wall using the
screws provided.
5. Gently push the remote into the remote holder
until it is snug.
NOTE: If you are mounting the Remote Holder onto
drywall, use drywall anchors.
1 2 3
all
open
close
8
Activating and Operating
Remote Control Guide
JOIN A BLIND TO A GROUP
NOTE: The LEVOLOR® remote will not operate a blind until
the window covering has been added to a GROUP.
1. Press and hold ■ STOP until the RED programming
light on the lower left of the remote starts flashing,
then release. This puts the remote in program mode.
2. Press the desired GROUP number (1, 2 or 3) on the
remote. The GREEN GROUP indicator light above
the GROUP button will flash to show it is selected.
3. With one hand press and continue to hold the
manual control button located on the headrail.
4. While continuing to hold down the manual control
button, use your other hand to press and hold ▲
UP ARROW on the remote until the window covering
moves slightly to indicate it has been joined to
the GROUP.
5. Release both buttons.
6. To exit program mode press and hold ■ STOP until
the lights stop flashing
NOTE: It is recommended that only similar window coverings
be included in a GROUP because of differences in product
features and operation.
9
Activating and Operating
Remote Control Guide
SET A FAVORITE POSITION
Each blind has one FAVORITE position. Default setting is
slats tilted up at a 45 degree angle. Setting a new FAVORITE
position overwrites any previous setting.
1. Using the manual control button located on the
headrail physically tilts slats open or closed to the
preferred FAVORITES position.
2. Press and hold ■ STOP until the RED programming
light on the lower left of the remote starts flashing,
then release. This puts the remote in program mode.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
♥ FAVORITE on the remote until the slats move
slightly to indicate it has set this window covering
position as your FAVORITE.
5. Release both buttons.
6. To exit program mode press and hold ■ STOP until
the lights stop flashing.
OPERATING BLINDS
Once the blinds have been joined to a GROUP or multiple
GROUPS, the remote is ready to operate the blind(s). Multiple
window coverings can be operated at the same time.
1. To wake up the remote press ■ STOP. The GREEN
indicator light from the last GROUP(S) selected
will be highlighted and active.
2. Press ALL or GROUP 1, 2 or 3 button(s) to select
specific blind(s) to operate. The selected GROUP(S)
GREEN indicator light above the number will light to
show they are selected.
3. Multiple GROUP buttons may be selected at the
same time.
4. To deselect a GROUP, press the GROUP button again.
The GREEN indicator light above the GROUP button
will go out.
5. Press ▲ UP ARROW to tilt the slats fully open on the
selected blind(s).
10
Activating and Operating
1 2 3
all
open
close
Remote Control Guide
6. Pressing the ▼ DOWN ARROW also tilts the slats
to the fully open position on the selected blind(s).
7. Press the RIGHT ARROW to tilt the slats in an
upward direction.
8. Press the LEFT ARROW to tilt the slats in a
downward direction.
9. Press ■ STOP to stop slat movement anywhere along
its travel path.
10. While the slats are is in motion, press the opposite
of its motion ▲ UP ARROW or ▼ DOWN ARROW to
reverse direction.
11. Press ♥ FAVORITE and the slats will move to your
preset FAVORITE position.
To operate the blinds using the remote:
press the GROUP button and then the
desired function. You can operate more than
one group at a time, by pushing multiple
group buttons and then pushing desired
function. (As an example, you could press
GROUP button 1 & 3 in succession and then
select the function OPEN, and all blinds
assigned to GROUP(S) 1 & 3, will open.)
You can also press the ALL button and then
select the function, and all blinds assigned to all GROUPS will
perform the function you selected.
To operate the blinds using the
FAVORITE function: press the GROUP
button and then select the FAVORITES
button. You can also select multiple GROUP
buttons, and then press the FAVORITES
button, or you can press ALL and then
press the FAVORITE button.
1 2 3
all
open
close
Favorite Button
Indice
Lingue:
Altri manuali Levolor Telecomando
