Lexmark C746 Guida di riferimento rapido
Media guide
The printer supports the following paper and other specialty media sizes.
Supported paper sizes
Paper size and
dimension
Standard
550‑sheet tray
Optional
550‑sheet tray
Optional
550‑sheet
specialty media
drawer
Optional
2,000‑sheet
high‑capacity
feeder
Multipurpose
feeder
Manual
paper
Manual
envelope
Duplex
A4
210 x 297 mm
(8.27 x 11.7 in.)
2 1 1 1 2 2 X
A5
148 x 210 mm
(5.83 x 8.27 in.)
212X2 2 X
A6
105 x 148 mm
(4.13 x 5.83 in.)
XX 2X2 2 XX
JIS B5
182 x 257 mm
(7.17 x 10.1 in.)
212X2 2 X
Letter
215.9 x 279.4 mm
(8.5 x 11 in.)
2 1 1 1 2 2 X
Legal
215.9 x 355.6 mm
(8.5 x 14 in.)
2 1 1 1 2 2 X
Executive
184.2 x 266.7 mm
(7.25 x 10.5 in.)
212X2 2 X
Oficio (México)
215.9 x 340.4 mm
(8.5 x 13.4 in.)
222X2 2 X
Folio
215.9 x 330.2 mm
(8.5 x 13 in.)
222X2 2 X
Statement
139.7 x 215.9 mm
(5.5 x 8.5 in.)
XX 2X2 2 X
1Source supports paper size with size sensing.
2Source supports paper size without size sensing.
3Paper size is supported if set to US.
4Paper size is supported if set to metric.
5Paper size is supported if its length is between 8.27 in. (210 mm) and 14 in. (355.6 mm); and its width is between 5.5 in. (139.7 mm) and 8.5 in. (215.9 mm) in short‑edge
loading orientation.
6This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software program.
7Turn Size Sensing off to support universal sizes that are close to standard media sizes.
Media guide
Page 1 of 4
Paper size and
dimension
Standard
550‑sheet tray
Optional
550‑sheet tray
Optional
550‑sheet
specialty media
drawer
Optional
2,000‑sheet
high‑capacity
feeder
Multipurpose
feeder
Manual
paper
Manual
envelope
Duplex
Universal7
148 x 210 mm to
215.9 x 355.6 mm
(5.83 x 8.27 in. to
8.5 x 14 in.)
2 1 X2 2 X5
Universal7
76.2 x 127 mm
(3 x 5 in.) to
215.9 x 1219.2 mm
(8.5 x 48 in.)
XXXX 2XX X
7 3/4 Envelope
(Monarch)
98.4 x 190.5 mm
(3.875 x 7.5 in.)
XX 2X2X2X
9 Envelope
98.4 x 226.1 mm
(3.875 x 8.9 in.)
XX 2X2X2X
Com 10 Envelope
104.8 x 241.3 mm
(4.12 x 9.5 in.)
XX 1X2X2X
DL Envelope
110 x 220 mm
(4.33 x 8.66 in.)
XX 1X2X2X
C5 Envelope
162 x 229 mm
(6.38 x 9.01 in.)
XX 1X2X2X
B5 Envelope
176 x 250 mm
(6.93 x 9.84 in.)
XX 2X2X2X
Other Envelope6
85.7 x 165 mm to
215.9 x 355.6 mm
(3.375 x 6.50 in. to
8.5 x 14 in.)
XX 2X2X2X
1Source supports paper size with size sensing.
2Source supports paper size without size sensing.
3Paper size is supported if set to US.
4Paper size is supported if set to metric.
5Paper size is supported if its length is between 8.27 in. (210 mm) and 14 in. (355.6 mm); and its width is between 5.5 in. (139.7 mm) and 8.5 in. (215.9 mm) in short‑edge
loading orientation.
6This size setting formats the envelope for 215.9 x 355.6 mm (8.5 x 14 in.) unless the size is specified by the software program.
7Turn Size Sensing off to support universal sizes that are close to standard media sizes.
Media guide
Page 2 of 4
Storing paper
Use these paper storage guidelines to help avoid jams and uneven print quality:
•For best results, store paper where the temperature is 21°C (70°F) and the relative humidity is 40%. Most label manufacturers
recommend printing in a temperature range of 18 to 24°C (65 to 75°F) with relative humidity between 40 and 60%.
•Store paper in cartons when possible, on a pallet or shelf, rather than on the floor.
•Store individual packages on a flat surface.
•Do not store anything on top of individual paper packages.
Avoiding jams
Load paper properly
•Make sure paper lies flat in the tray.
Correct paper loading Incorrect paper loading
•Do not remove a tray while the printer is printing.
•Do not load a tray while the printer is printing. Load it before printing, or wait for a prompt to load it.
•Do not load too much paper. Make sure the stack height does not exceed the maximum paper fill indicator.
•Make sure the guides in the tray or the multipurpose feeder are properly positioned and are not pressing too tightly against
the paper or envelopes.
•Push the tray in firmly after loading paper.
Use recommended paper
•Use only recommended paper or specialty media.
•Do not load wrinkled, creased, damp, bent, or curled paper.
•Flex and straighten paper before loading it.
•Do not use paper that has been cut or trimmed by hand.
•Do not mix paper sizes, weights, or types in the same stack.
Media guide
Page 3 of 4
•Make sure all paper sizes and types are set correctly in the printer control panel menus.
•Store paper per manufacturer recommendations.
Media guide
Page 4 of 4
Altri manuali per C746
11
Indice
Altri manuali Lexmark Stampante
Lexmark
Lexmark T430dn Manuale utente
Lexmark
Lexmark CS310 Series Manuale utente
Lexmark
Lexmark 780dn - C Color Laser Printer Manuale
Lexmark
Lexmark T420d Manuale utente
Lexmark
Lexmark Dot Matrix Manuale utente
Lexmark
Lexmark MX310 Series Manuale utente
Lexmark
Lexmark C530 series, C532 series, C534 series Manuale utente
Lexmark
Lexmark E 330 Manuale utente
Lexmark
Lexmark 3000 Color Jetprinter Manuale utente
Lexmark
Lexmark M1145 Istruzioni di installazione e manutenzione
Lexmark
Lexmark C746 Manuale di istruzioni
Lexmark
Lexmark CS410 series Manuale utente
Lexmark
Lexmark Color Jetprinter Z700 Series Manuale utente
Lexmark
Lexmark 310 Series Manuale utente
Lexmark
Lexmark CS796de Manuale utente
Lexmark
Lexmark W820 Manuale utente
Lexmark
Lexmark 280 Manuale utente
Lexmark
Lexmark 3300 Series Manuale utente
Lexmark
Lexmark Color Jetprinter Z55 Manuale utente
Lexmark
Lexmark X738DTE Manuale utente
