Lexmark MS810n Guida alla configurazione
Printing Guide
Loading the 250‑or 550‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1Pull out the tray.
Notes:
•When loading folio‑, legal‑, or Oficio‑size paper, lift the tray slightly and pull it out completely.
•Avoid removing trays while a job prints or while Busy appears on the display. Doing so may cause a jam.
2Squeeze and slide the width guide to the correct position for the size of the paper being loaded until it clicks into place.
Printing Guide
Page 1 of 18
Note: Use the paper size indicators at the bottom of the tray to help position the guides.
3Unlock the length guide, and then squeeze and slide the guide to the correct position for the size of the paper being loaded.
Notes:
•Lock the length guide for all paper sizes.
•Use the paper size indicators at the bottom of the tray to help position the guides.
Printing Guide
Page 2 of 18
4Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.
5Load the paper stack with the printable side facedown.
Note: Make sure the paper or envelope is loaded properly.
•There are different ways of loading letterhead depending on whether an optional staple finisher is installed or not.
Without an optional staple finisher With an optional staple finisher
ABC
One‑sided printing One‑sided printing
ABC
Two‑sided printing
ABC
Two‑sided printing
Printing Guide
Page 3 of 18
•If you are loading prepunched paper for use with the staple finisher, then make sure the holes on the long edge of the
paper are on the right side of the tray.
One‑sided printing Two‑sided printing
ABC
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
•Do not slide the paper into the tray. Load paper as shown in the illustration.
•If you are loading envelopes, then make sure that the flap side is facing up and the envelopes are on the left side of the
tray.
Printing Guide
Page 4 of 18
•Make sure the paper is below the solid line, which is the maximum paper fill indicator.
Warning—Potential Damage: Overfilling the tray can cause paper jams.
Printing Guide
Page 5 of 18
•When using card stock, labels, or other types of specialty media, make sure the paper is below the dashed line, which is
the alternate paper fill indicator.
6For custom‑or Universal‑size paper, adjust the paper guides to lightly touch the sides of the stack, and then lock the length
guide.
7Insert the tray.
8From the printer control panel, set the paper size and paper type in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams and print quality problems.
Printing Guide
Page 6 of 18
Loading the 2100‑sheet tray
CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays
closed until needed.
1Pull out the tray.
2Adjust the width and length guides.
Loading A5‑size paper
aPull up and slide the width guide to the position for A5.
LGL
OFC
FOLIO
LTR
A4
A5
1
LGL
OFC
FOLIO
LTR
A4
A5
2
LGL
OFC
FOLIO
LTR
A4
A5
Printing Guide
Page 7 of 18
bSqueeze and slide the length guide to the position for A5 until it clicks into place.
12
cRemove the A5 length guide from its holder.
12
dInsert the A5 length guide into its designated slot.
Note: Press the A5 length guide until it clicks into place.
Printing Guide
Page 8 of 18
Loading A4‑, letter‑, legal‑, oficio‑, and folio‑size paper
aPull up and slide the width guide to the correct position for the size of the paper being loaded.
LGL
OFC
FOLIO
LTR
A4
A5
1
LGL
OFC
FOLIO
LTR
A4
A5
2
LGL
OFC
FOLIO
LTR
A4
A5
bIf the A5 length guide is still attached to the length guide, then remove it from its place. If the A5 length guide is not
attached, then proceed to step d.
Printing Guide
Page 9 of 18
cPut the A5 length guide in its holder.
2
1
dSqueeze the length guide and slide it to the correct position for the size of the paper being loaded until it clicks into place.
Printing Guide
Page 10 of 18
Altri manuali per MS810n
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Lexmark Stampante
Lexmark
Lexmark C950de Manuale utente
Lexmark
Lexmark Optra Series Manuale utente
Lexmark
Lexmark E460DN - Taa Govt Compliant Manuale
Lexmark
Lexmark T650 Manuale utente
Lexmark
Lexmark MB2236 Manuale utente
Lexmark
Lexmark C925de Manuale utente
Lexmark
Lexmark C 540n Manuale utente
Lexmark
Lexmark B3340dw Manuale utente
Lexmark
Lexmark MX6500E Manuale utente
Lexmark
Lexmark 3300 Series Manuale utente
Lexmark
Lexmark C935 Series Manuale utente
Lexmark
Lexmark C540 Manuale utente
Lexmark
Lexmark Multifunction Laser Manuale utente
Lexmark
Lexmark C534N Manuale utente
Lexmark
Lexmark Optra M410 Manuale
Lexmark
Lexmark X6100 Manuale
Lexmark
Lexmark E 210 Manuale utente
Lexmark
Lexmark C950 Series Manuale utente
Lexmark
Lexmark T620 Manuale utente
Lexmark
Lexmark 910 Manuale utente
