LG STB-2000 Manuale utente
OWNER’S MANUAL
SET-TOP BOX
Please read this manual carefully before operating your
product and retain it for future reference.
P/NO : MFL68080365 (1406-REV00)
STB-2000
*mfl68080365* www.lgsolutions.com
2
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING
- TO REDUCE THE RISK OF FIRE AND
ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION
- Do not attempt to modify this product in
any way without written authorization from
LG Electronics U.S.A., Inc. Unauthorized
modification could void the user’s authority
to operate this product.
COMPLIANCE
- The responsible party for this product’s
compliance is: LG Electronics U.S.A. Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ
07632, USA • Phone: 1-201-816-2000
WARNING: This product contains chemicals
known to the State of California to cause
cancer and birth defects or other reproductive
harm.
Wash hands after handling.
WARNING
If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
3
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this apparatus near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
•Do not install near any heat sources, such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
•Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than
the other. A grounding-type plug has two
blades and a third grounding prong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
•Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles, and the point where it exits from
the apparatus.
•Only use attachments/accessories specified
by the manufacturer.
•Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination in order to avoid injury from
tip-over.
PORTABLE CART WARNING
•Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
•Never touch this apparatus or antenna during
a thunder or lighting storm.
•When mounting an STB on the wall, make
sure not to install the STB by the hanging
power and signal cables on the back of the
STB.
•Do not allow an impact shock or any objects
to fall into the product.
•Power Cord
Caution: It is recommended that appliances
be placed upon a dedicated circuit; that is,
a single outlet circuit which powers only
that appliance and has no additional outlets
or branch circuits. Check the specification
page of this owner’s manual to determine
necessary power requirements for this set.
Periodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and have
the cord replaced with an exact replacement
part by an authorized servicer. Protect the
power cord from physical or mechanical
abuse, such as twisting, kinking, or pinching
or being closed in a door or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
Do not use a damaged or loose power cord.
Be sure to grasp the plug when unplugging
the power cord. Do not pull on the power
cord to unplug the STB.
•Overloading
Do not connect too many appliances to the
same AC power outlet as this could result
in fire or electric shock. Do not overload
wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these
conditions could result in fire or electric
shock.
•Outdoor Use/Wet Location
Warning: To reduce the risk of fire or
electrical shock, do not expose this
product to rain, moisture or other liquids.
Do not touch the STB with wet hands. Do not
install this product near flammable objects
such as gasoline or candles or expose the
STB to direct air conditioning.
Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc., on or over the apparatus
(e.g., on shelves above the unit). 20.
•Disconnect Device
The mains plug is the disconnecting device.
The plug must remain readily operable.
As long as this unit is connected to the AC
wall outlet, it is not disconnected from the
AC power source even if you turn off this unit
by SWITCH.
4
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
•Outdoor Antenna Grounding
If an outside antenna or cable system
is connected to the product, follow the
precautions below.
An outdoor antenna system should not be
located in the vicinity of overhead power
lines or other electric light or power circuits
or where it can come into contact with such
power lines or circuits as death or serious
injury can occur.
Be sure the antenna system is grounded so
as to provide some protection against voltage
surges and built-up static charges.
Article 810 of the National Electrical Code
(NEC) in the U.S.A. provides information
with respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location
of antenna-discharge unit, connection to
grounding electrodes, and requirements for
the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
Ground Clamp
Grounding Conductor
(NEC Section 810-21)
Antenna Lead in Wire
Electric Service
Equipment
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
•Cleaning
When cleaning, unplug the power cord
and rub gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the STB as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzene.
•Transporting Product
Make sure the product is turned Off and
unplugged and that all cables have been
removed. Do not press against or put stress
on the STB.
•Ventilation
Install the STB where there is proper
ventilation. Do not install in a confined
space such as a bookcase. Do not cover the
product with cloth or other materials (e.g.,
plastic) while it is plugged in. Do not install in
excessively dusty places.
•Do not touch the ventilation openings, as
they may become hot while the STB is
operating.
•If you smell smoke or other odors coming
from the STB or hear strange sounds, unplug
the power cord, and contact an authorized
service center.
•Keep the product away from direct sunlight.
•Unplug this apparatus during lightning storms
or when unused for long periods of time.
•Keep the packing anti-moisture material or
vinyl packing out of the reach of children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
•Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
•Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus.
(e.g. on shelves above the unit).
•Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
•As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
•Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.
5
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
LG RECYCLING POLICY
LG Electronics offers a customized e-waste take-back and recycling service that meets local
needs and requirements in the countries where e-waste regulations are in place, and also provides
product and packaging take-back and recycling service voluntarily in some countries. LG Electronics
evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the
goal of improving recyclability where practicable. Through these activities, LG seeks to contribute
to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at
http://www.lg.com/global/sustainability/environment/take-back-recycling .
6
ENGLISH
LICENSES / OPEN SOURCE SOFTWARE NOTICE
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
For DTS patents, see http://patents.dts.com. Manufactured under license from
DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are
registered trademarks, and DTS 2.0+Digital Out is a trademark of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com. In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
product.
•Image shown may differ from your product.
•The available menus and options may differ from the input source or product model that you are
using.
•New features may be added to this product in the future.
NOTE
7
ENGLISH
TABLE OF CONTENTS
2 IMPORTANT SAFETY
INSTRUCTIONS
6 LICENSES
6 OPEN SOURCE SOFTWARE
NOTICE
7 TABLE OF CONTENTS
8 ASSEMBLING AND PREPARING
8 Unpacking
9 Parts and Components
9 - Front Panel
9 - Back Panel
10 How to use Dual Lock™ (Optional)
11 MAKING CONNECTIONS
11 Connecting to an Antenna or Cable
12 Other Connections
14 MAINTENANCE
14 Cleaning your Set-Top Box
14 TROUBLESHOOTING
15 SPECIFICATIONS
17 WARRANTY
TABLE OF CONTENTS
8
ENGLISH
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
STB-2000 Owner’s Manual AC/DC Adapter
HDMI Cable TLM Cable MPI Cable
A/V Adapter Cable Dual Lock™
•Do not use any unapproved items to ensure the safety and product’s lifespan.
•Any damages or injuries by using unapproved items are not covered by the warranty.
CAUTION
•The items supplied with your product may vary depending on the
model.
•Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
•Use an extension cable that supports USB 2.0 if the USB cable or
USB memory stick does not fit into your TV’s USB port.
NOTE
B
AA
B
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
9
ENGLISH
ASSEMBLING AND PREPARING
Parts and Components
Front Panel
Back Panel
HDMI OUT LAN DIGITAL
AUDIO
AV IN IR IN POWER ANTENNA/
CABLE IN
AUDIO
LINE OUT SERVICE
DISPLAY
CONTROL 1
DISPLAY
CONTROL 2
MPI HDMI IN 2
(ARC)
HDMI IN 1 USB IN 1 USB IN 2
ARC (Audio Return Channel)
•When connected with a high-speed HDMI cable, digital audio can be sent to a compactible device
without an additional optical audio cable.
•ARC is only supported on the HDMI input 2 port. An external audio device that supports ARC should
be connected to HDMI IN 2 (ARC) if you wish to use ARC.
NOTE
10
ENGLISH
ASSEMBLING AND PREPARING
How to use Dual Lock™ (Optional)
(Image shown may differ from your product.)
Fix the set-top box to the TV and use it when you want to.
1After removing the protection paper from the Dual Lock, stick it to the TV and the set-top box as
shown.
Dual Lock™
2Attach the set-top box to the TV by pressing the Velcro strips together.
•Please make sure no foreign substances exist on the surface of the product, and then firmly attach
the Dual Lock.
•Before attaching the set-top box to the TV set, let the attached Dual Lock dry for at least three days.
NOTE
Altri manuali per STB-2000
1
Indice
Altri manuali LG Decoder
LG
LG STB-3500 Manuale utente
LG
LG STB-5500-GB.AAU Manuale utente
LG
LG STB-2000 Manuale utente
LG
LG CLOUD V Series Manuale utente
LG
LG STB-6500-TA Manuale utente
LG
LG FiRST MEDIA SH960C-LN Manuale utente
LG
LG STB-5500-GB Manuale utente
LG
LG LST-3100A Manuale utente
LG
LG SN730H-SI Manuale utente
LG
LG 8K Upgrader Manuale utente
LG
LG STB-5500 Manuale utente
LG
LG AN-WL100W Manuale utente
LG
LG STB-600A-UB Manuale utente
LG
LG STB-6500-CB Manuale utente
LG
LG First Media ST950I-LN Manuale utente
LG
LG STB-3000 Manuale utente
LG
LG STB-3000 Manuale utente
LG
LG STB-5500-CA Manuale utente
LG
LG TSP500-M Guida rapida
LG
LG STB-6500 Manuale utente
