LG PH3G Manuale utente
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
PH3 PH3G PH3O
OWNER’S MANUAL
Portable
Bluetooth
Speaker
Copyright © 2017 LG Electronics. All Rights Reserved
www.lg.com
*MFL69669601*
1 Getting Started
Getting Started 3
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufcient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing) instructions
in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked ame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service centre.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.
NOTICE: For safety marking information including
product identication and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started4
Getting Started
1
CAUTION when using this product in environments
of low humidity
yIt may cause static electricity in environments of
low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, re or
the like.
Symbols
~Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
Table of Contents 5
1
2
3
4
1 Getting Started
3 Safety Information
6 Main Features
6 Introduction
6 Accessories
7 Main Unit
8 Charging the Unit
8 – Connecting the AC adapter
8 – Checking Battery status
8 – Checking the charging status
2 Operating
9 Basic Operations
9 – Using power button
9 – Bluetooth Connection
9 – Simple Operation Guide
10 – Bluetooth LED (White) status
11 Mood LED light
12 Listening to Music from Your External Device
12 Using BLUETOOTH® technology
13 – Listening to music stored on the
BLUETOOTH devices
14 Multipoint Connection
14 Other Operation
14 – Resetting
14 – Notice for Auto Power Off
3 Troubleshooting
15 Troubleshooting
4 Appendix
16 Trademarks and Licenses
16 Handling the Unit
17 Specifications
Table of Contents
Getting Started6
Getting Started
1
Main Features
Portable In
Listens to music from your portable device.
Mood LED light
You can control the changing mood LED light.
Introduction
Symbol used in this manual
, Note
Indicates special notes and operating features.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Accessories
Please check and identify the supplied accessories.
USB cable (1) Simple Manual (1)
Getting Started 7
Getting Started
1
Main Unit
PORT.IN
PORT.IN
a
bc
d
e
f
g
h
i
j
k
a
Turns On / Off : Press and hold it.
b
Changes mood LED light mode.
c
RESET hole
d
Bluetooth LED.
e j
- Adds a Bluetooth device for multi pairing.
(Press and hold j)
- Changes to Bluetooth mode in portable mode.
(Press j)
* When you connect the portable cable, the
function is changed to portable in mode
automatically.
fT
Starts or pauses playback on the Bluetooth
mode.
Mutes the sound on the portable.
go : Turn up the volume.
hp : Turn down the volume.
i
Battery LED
j Portable In connector
Listens to music from your portable device.
k USB port for charging
Getting Started8
Getting Started
1
Charging the Unit
Connecting the AC adapter
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied USB cable to the AC
adapter.
2. Connect the USB cable to USB port of of the unit.
3. Plug the AC adapter into an AC outlet.
PORT.IN
PORT.IN
(Not supplied)
If the battery is fully charged in charging mode,
indicator is changed from red to white.
AC adapter is not supplied.
It is recommended that you use the 5 V AC
adapter approved by LG Electronics Inc. (more
than 1.8 A) with this unit because of danger of
explosion. If you do not use the recommended
adapter, charging is unavailable or charging time
may differ.
> Caution
Checking Battery status
When AC Adapter is connected, battery charging is
started. You can check the charging status by battery
indicator.
PORT.IN
LED Description
White Battery is fully charged.
Red Battery is charging.
yOperating time is approx. 10 hours. (Based
on fully charged the battery and continuous
playback using 50 % volume level.)
It may vary depending on the battery status
and operational conditions.
yIf you listen to the music while charging,
it will take longer to charge.
, Note
Checking the charging status
If the power turned on, you can check the charging
status by pressing
1/!
button.
LED Description Status
White
Battery LED blinks
once.
60 %
15 %
15 %
Amber
Battery LED blinks
once.
60 %
15 %
15 %
Amber
Automatically
battery LED blinks
and mood light (red)
blinks twice with
the sound.
60 %
15 %
15 %
2 Operating
Operating 9
Operating
2
Basic Operations
Using power button
PORT.IN
Power On / Off
Press and hold the
button for more than
1 second.
Bluetooth Connection
LG PH3 (XX)
PORT.IN
Play the desired music on the Bluetooth device. After
pairing, you can control playback using the buttons
on the front of the unit.
Simple Operation Guide
Function How to Status
Power On Press and hold the button. Bluetooth LED blinks with the sound.
Power Off Press and hold the button. Bluetooth LED turns off with the
sound.
Bluetooth pairing
When Bluetooth LED blinks with the
sound, select LG PH3 (XX) from device
list on your smart device.
Bluetooth LED turns on with the
sound.
Play / Pause Press T. -
Forward skip Press T twice. -
Backward skip Press Tthree times. -
Volume control Press p or o.
When this unit reaches minimum
volume or maximum volume, you can
hear beep sound.
Multi pairing Press and hold j for 2 seconds to add
another Bluetooth device.
During the search for another device,
the Bluetooth LED blinks. After pairing,
Bluetooth LED stays in white with the
sound.
Bluetooth Initialization Press and hold j for 10 seconds. Bluetooth and charging LED blinks
with the sound.
Operating10
Operating
2
Bluetooth LED (White) status
PORT.IN
LED Status Description
Bluetooth LED
blinks with the
sound.
Searching for
Bluetooth device.
Bluetooth LED
turns on with the
sound.
Bluetooth device
is connected.
Once pairing is performed, it does not need to
be done again even if you turn off this unit.
, Note
Altri manuali per PH3G
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali LG Altoparlanti
