LG ThinQ WK7 Scheda tecnica
SIMPLE MANUAL
MODEL
WK7 / WKM7
www.lg.com
Copyright © 2018-2019 LG Electronics Inc.
All Rights Reserved.
MFL70405137
1903_Rev01
2
Safety Information
C
AUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This lightning ash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing) instructions in the
literature accompanying the product.
WARNING:
yTO PREVENT FIRE OR ELECTRIC SHOCK
HAzARD, DO NOT ExPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
yDo not install this equipment in a conned
space such as a book case or similar unit.
yThis unit contains magnets which can
be harmful to some kind of object (Ex:
Magnetic card, Pacemaker etc..).
CAUTION:
yDo not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings should never be blocked by
placing the product on a bed, sofa, rug or other
similar surface. This product shall not be placed
in a built-in installation such as a bookcase or
rack unless proper ventilation is provided or the
manufacturer’s instruction has been adhered to.
yThe apparatus should not be exposed
to water (dripping or splashing) and no
objects lled with liquids, such as vases,
should be placed on the apparatus.
yNo naked ame sources, such as lighted
candles, should be placed on the apparatus.
3
yTo avoid re or electric shock, do not open the
unit. contact to qualied personnel only.
yDo not leave the unit in a place near the
heating appliances or subject to direct
sunlight, moisture, or mechanical shock.
yThe Power Plug is the disconnecting
device. In case of an emergency, the Power
Plug must remain readily accessible.
yTo clean the unit, use a soft, dry cloth. If
the surfaces are extremely dirty, use a
soft cloth lightly moistened with a mild
detergent solution. Do not use strong
solvents such as alcohol, benzine, or
thinner, as these might damage the
surface of the unit.
yDo not use volatile liquids such as
insecticide spray near the unit. Wiping with
strong pressure may damage the surface.
Do not leave rubber or plastic products in
contact with the unit for a long period of
time.
yDo not place the unit over the vehicle’s
air bag. When the air bag deploys, it may
result in injury. Before using in the car, x
the unit.
yDo not use the handsfree function during
driving a car.
yDo not leave the unit on an unstable place
such as high shelves. it may fall down
because of the vibration of the sound.
yDo not use high voltage products around this
product. (ex. Electrical swatter) This product
may malfunction due to electrical shock.
CAUTION when using this product in
environments of low humidity.
yIt may cause static electricity in environments
of low humidity.
yIt is recommended to use this product after
touching any metal object which conducts
electricity.
4
NOTICE: For safety marking information
including product identication and supply
ratings, please refer to the main label on the
bottom or the other surface of the product.
CAUTION: Only use the AC adapter supplied
with this device. Do not use a power supply
from another device or another manufacturer.
Using any other power cable or power supply
may cause damage to the device and void your
warranty.
Symbols
Refers to alternating current (AC).
0Refers to direct current (DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.
FCC Compliance Statement
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
yReorient or relocate the receiving antenna.
yIncrease the separation between the
equipment and the receiver.
yConnect the equipment to an outlet on
a circuit different from that to which the
receiver is connected.
yConsult the dealer or an experienced
radio/TV technician for help.
5
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference and (2) this device must
accept any interference received, including
interference that may cause undesired
operation. Any changes or modications in
construction of this device which are not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be
co-located or operating in conjunction with
any other antenna or transmitter.
This equipment should be installed and
operated with minimum distance 20 cm (7.8
inches) between the antenna and your body.
Users must follow the specic operating
instructions for satisfying RF exposure
compliance.
FCC Radio Frequency Interference
Requirements: High power radars are
allocated as primary users of the 5.25 to 5.35
GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with
and/or damage this device. This device cannot
be co-located with any other transmitter
Supplier’s Declaration of Conformity
Trade Name LG
Responsible Party
LG Electronics USA, Inc.
Address
1000 Sylvan Ave Englewood
Cliffs, NJ 07632
Telephone (201)266-2215
6
IMPORTANT SAFETY
INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
7
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the cart/
apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
USA Only (Product with embedded
rechargeable battery ONLY)
In case rechargeable battery is included in
this product, the entire device should be
recycled in compliance with rechargeable
battery recycling standards because of the
internal battery.
To dispose of properly, call (800) 822-8837
or visit www.call2recycle.org.
8
OPEN SOURCE
SOFTWARE NOTICE
INFORMATION
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CDROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to opensource@lge.
com. This offer is valid for a period of three
years after our last shipment of this product.
This offer is valid to anyone in receipt of this
information.
Disclaimers
yGoogle, Google Home, Google Play,
Chromecast built-in and other related marks
and logos are trademarks of Google LLC.
yGoogle Assistant requires an internet/data
connection. Data rates may apply.
yThe Google Assistant is not available in
certain languages and countries.
ySubscriptions may be required, and additional
terms, conditions and/or charges may apply.
yControlling certain devices and features
in your home requires a compatible smart
device.
9
Set up
Step 1. Connect the AC
adapter
After connecting the AC adapter, the
speaker starts booting. Then Function
LED rotates for 10 seconds (Approx. 30
~ 50 seconds) during booting.
10
Step 2. Install "Google
Home" App
Download the Google Home App from
the Google Play or App Store.
Google Home
The speaker is not compatible with the
“Smart ThinQ” app. So it can not be
used for setup or for control by using
the “Smart ThinQ” app.
NOTE
Step 3. Set up the
Wi-Fi connection with app
aConnect your smart device to the
Wi-Fi network that you’ll use for
your speaker.
In case of iOS devices, it should be
turned on Bluetooth setting on your
smart device.
NOTE
bLaunch the “Google Home” app.
Altri manuali per ThinQ WK7
7
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali LG Altoparlanti
