Life Span Focus Manuale utente
NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at www.lifespanonline.com.au
Product may vary slightly from the item pictured due to model upgrades
Read all instructions carefully before using this product. Retain this owner’s manual for
future reference.
FOCUS OWNER’S MANUAL
2
FOCUS
TABLE OF CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS 3
2. IMPORTANT ELECTRICAL INFORMATION 4
3. IMPORTANT OPERATING INSTRUCTIONS 5
4. ASSEMBLY INSTRUCTIONS 6
5. FOLDING INSTRUCTIONS 10
6. GROUNDING METHODS 11
7. OPERATION GUIDE 12
8. EXERCISE GUIDE 15
9. MAINTENANCE INSTRUCTIONS 17
10. EXPLODED DIAGRAM 22
11. PARTS LIST 23
12. TROUBLE SHOOTING GUIDE 24
13. WARRANTY 26
14. PROGRAM CHART 27
3
FOCUS
1. IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this treadmill.
It is important your treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.
Danger –To reduce the risk of electric shock disconnect your treadmill from the electrical outlet prior to
cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY
USING IMPROPER ADAPTERS OR IN ANY WAY MODIFY THE CORD SET.
Install the treadmill on a flat level surface with access to a 220-240 volt (50/60Hz), grounded outlet.
Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet and
treadmill may result.
Do not block the rear of the treadmill. Provide a minimum of 1 metre clearance between the rear of
the treadmill and any fixed object.
Place your unit on a solid, level surface when in use
Never allow children on or near the treadmill.
When running, make sure the plastic clip is fastened on your clothing. It is for your safety, should
you fall or move too far back on the treadmill.
Keep hands away from all moving parts.
Never operate the treadmill if it has a damaged cord or plug.
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
Never drop or insert any object into any openings.
The treadmill is intended for in-home use only and not suitable for long time running.
4
FOCUS
To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug
from the outlet.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
Use the handrails provided; they are for your safety.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on your
treadmill. Quality athletic shoes are recommended to avoid leg fatigue.
Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
2. IMPORTANT ELECTRICAL INFORMATION
WARNING!
NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power
cord away from any moving part of the treadmill including the elevation mechanism and transport
wheels.
NEVER remove any cover without first disconnecting AC power.
NEVER expose this treadmill to rain or moisture. This treadmill is not designed for use outdoors,
near a pool, or in any other high humidity environment.
This is high-power item; please do not share the same outlet with other high power machines such
as, fridges, air conditioning etc. Please choose an outlet exclusively for the machine and make sure
the fuse is 10A.
5
FOCUS
3. IMPORTANT OPERATING INSTRUCTIONS
Be sure to read the entire manual before operating your machine.
Understand that changes in speed and incline do not occur immediately. Set your desired speed on
the computer console and release the adjustment key. The computer will obey the command
gradually.
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in
the centre of the belt; which may result in serious injury.
In order to prevent losing balance and suffering unexpected injury, NEVER mount or dismount the
treadmill while the belt is moving. This unit starts with at a very low speed. Simply standing on the
belt during slow acceleration is proper after you have learned to operate this machine.
Always hold on to handrail while making control changes.
A safety key is provided with this machine. Remove the safety key will stop the walking belt
immediately; the treadmill will shut off automatically. Inserting the safety key will reset the display.
Do not use excessive pressure on console control keys. They are precision set to function properly
with little finger pressure.
6
FOCUS
4. ASSEMBLY INSTRUCTIONS
PART LIST
NO
Description
Specifications
QTY
NO
Description
Specifications
QTY
1
Main frame
1
58
Bolt
M6*10
2
21
Left upright bottom cover
1
61
Bolt
M8*45
2
22
Right upright bottom cover
1
63
Bolt
ST4.2*19
4
23
Left handlebar cover
1
79
Safety lock
1
24
Right handlebar cover
1
88
6#Allen wrench
5mm
1
38
Bolt
M8*40
2
89
Wrench/screwdriver
S=13\14\15mm
1
39
Lock nut
8
4
90
5# Allen Wrench
5mm
1
40
Nut
M8
2
50
Bolt
M8*20
2
7
FOCUS
STEP 1:
STEP 2:
STEP 3:
1. Open the carton
2. Extract the parts listed above
3. Place the Main Frame (1) onto level
ground
1. Turn the computer so that the
handles are perpendicular to the
uprights
2. Use the 5# Allen wrench to screw
the bolt (38) through the Lock
washer, then lock the computer onto
the R&L upright tubes
Note: Support the Uprights with your hands to
prevent them falling down and causing injury.
1. Insert the handle bar into the computer
frame.
2. Then secure, using bolt (58) M6*10 and
Wrench/screwdriver
Attention: Do not pull the hand pulse electronic
line when inserting the hand bar into the computer
frame.
8
FOCUS
STEP 4:
STEP 5:
1. Using the 5# Allen wrench, screw
through the Bolt (50) to Lock Washer
(39), then lock the right upright onto
the Main Frame.
2. Using the M8*45 bolt (61), lock nut
(39), M8 bolt(40) and 5# Allen wrench,
lock the left upright tubes into the main
frame. Refer to the picture on the left.
Attention: Hold the upright tube at when locking
the upright tube to main frame to prevent it from
falling and cause injury or damage.
1. Press the left uprights covers (23)
onto the left handle bar
2. Press the right uprights covers (24)
onto the right handle bar
9
FOCUS
10
FOCUS
5. FOLDING INSTRUCTIONS
Unfolding:
Folding:
Whilst supporting position (A) with our
hand, gently push position (B), the marked
area on the air pressure bar, with your foot.
The base frame will descend automatically.
(Please keep people and any pets away
the machine during descent)
Place your hand on position (A), then pull
up the base frame until you hear the click
sound emitted when the air pressure bar
(B) is locked into the round tube.
A
B
B
A
Indice
Altri manuali Life Span Tapis roulant
Life Span
Life Span TR1000B Manuale utente
Life Span
Life Span TR1200i Manuale utente
Life Span
Life Span TR5500iC Manuale utente
Life Span
Life Span SUPER XL Manuale utente
Life Span
Life Span TR2500-HRC Manuale utente
Life Span
Life Span TR6000i Manuale utente
Life Span
Life Span dominator Manuale utente
Life Span
Life Span CORSAIR FREERUN 200 Manuale utente
Life Span
Life Span PRO Series Manuale utente
Life Span
Life Span TR3000i Manuale utente
Life Span
Life Span TORQUE II Manuale utente
Life Span
Life Span Jazz Manuale utente
Life Span
Life Span Traction II Manuale utente
Life Span
Life Span TR800-DT Manuale utente
Life Span
Life Span TR2000i Touch Manuale utente
Life Span
Life Span Everest 2 Manuale utente
Life Span
Life Span Power-S Manuale utente
Life Span
Life Span TR7000i Manuale utente
Life Span
Life Span Pursuit 3 Manuale utente
Life Span
Life Span Dash Manuale utente
